• Fitting Position: Front Axle
• General Information: Spring support; front spring disc
• Manufacturer: BORSEHUNG

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: spring support; down
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Axle: Independent wheel suspension
• Suspension: for vehicles without electronic suspension control
• Chassis Type: High chassis
• Name: COC 49495773
• Manufacturer: CORTECO

Vehicle Equipment: for vehicles with reinforced shock absorbers, for vehicles without reinforced shock absorbers

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear Axle
• Suspension: for vehicles with standard suspension
• for PR number: 0K0, 1JC, 1JD
• Name: COC 49483041
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Lisainfo: Top Strut Mounting
• Additional information: Top Strut Mounting

• Axle: Independent wheel suspension
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-033
• Manufacturer: NTY
• Name: NTY AD-VW-033

• Axle: Rigid Axle
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Name: Vedruamordi tugilaager
• Manufacturer: MEY

• Fitting Position: Front Axle
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Height [mm]: 40
• Bearing Type: Ball Bearing
• Name: Laager - K„„ndmik VW P. AUDI, SKODA
• Manufacturer: MEY
• Lisainfo: 1006410020
• Additional information: 1006410020

• Suspension: for vehicles with sports suspension
• Fitting Position: Right, Left, Rear Axle
• Number of Parts [parts]: 1
• Name: SN KB954.09
• Manufacturer: NTN-SNR

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!BEZ O½YSKA!!!

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Weight [kg]: 0.415
• Manufacturer: TEDGUM
• Name: TG TED22900

• Fitting Position: Front Axle
• Quantity per axle: 2
• Name: Laager,amorditugilaager
• Manufacturer: SKF

• Suspension: for vehicles with sports suspension
• Inner Diameter 1 [mm]: 74
• Outer Diameter 1 [mm]: 127
• Fitting Position: Front Axle Right, Front Axle Left
• Name: SN M257.03
• Manufacturer: SNR

• Fitting Position: Front Axle
• Inner Diameter [mm]: 78.5
• Outer Diameter [mm]: 127.5
• Bearing Type: Ball Bearing
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Fitting Position: Rear Axle
• for OE number: 5Q0513353H
• Weight [kg]: 0.4
• Supplementary Article/Info 2: without rolling bearing
• Guarantee: 5 years guarantee
• Packaging length [cm]: 13.6
• Packaging width [cm]: 11.8
• Packaging height [cm]: 11.4
• Manufacturer: MONROE

• for PR number: 0K0
• Height [mm]: 55
• Inner Diameter [mm]: 12
• Material: Aluminium
• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.3
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 37574 01
• Manufacturer: LMI

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- BEZ O½YSKA

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 803 024
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C

• for PR number: UC7, UC8
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.392
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 94 0171
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 2
• Fitting Position: Rear Axle
• Weight [kg]: 0.34
• Required quantity: 2
• Thickness [mm]: 60
• Inner Diameter [mm]: 10
• Material: Aluminium
• Mounting Type: Rubber-Metal Mount
• General Information: Shock absorber upper cover
• Manufacturer: VIKA

• for PR number: 0K0, 1JA, 1JC, 1JD
• Fitting Position: Rear Axle
• Name: Vedruamordi tugilaager
• Manufacturer: BIL
• Quality class: Q

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Weight [kg]: 0.33
• Packaging length [cm]: 12.7
• Packaging width [cm]: 12.7
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Name: Laager,amorditugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Production date from: 10/12
• Production date to: 31/01/18
• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• for OE number: 5Q0412331F
• Manufacturer: SASIC

• Production date from: 01/13
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 60
• for OE number: 5Q0513353G
• Manufacturer: SASIC

• for PR number: 1JA, 1JC, 1JD
• Axle Version: standard rear axle
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 11.2
• Quantity per axle: 2
• for OE number: 5Q0 513 353 H
• Housing diameter pressure stop [mm]: 56
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LEMFORDER

• for PR number: 1JA, 1JC, 1JD
• Axle Version: standard rear axle
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 11.2
• Quantity per axle: 2
• for OE number: 5Q0 513 353 H
• Housing diameter pressure stop [mm]: 56
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

• for PR number: UC7, UC8, 1JP
• Axle Version: standard rear axle
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LMI

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B Name: Laager - K„„ndmik. VW T. LEON/GOLF VII/SPORTSVAN/OCTAVIA 12- LE/PR

• Quantity: 2
• Weight [kg]: 0.8
• Fitting Position: Front Axle
• Required quantity: 2
• Inner Diameter [mm]: 14
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 814018310
• Manufacturer: FAG

• Fitting Position: Rear Axle
• General Information: Shock absorber upper cover
• Manufacturer: VIKA

• Axle: Independent wheel suspension
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Manufacturer: KAVO

• Fitting Position: Front Axle Right, Front Axle Left
• Mounting Type: Rubber Mount
• Length [mm]: 41.2
• Weight [kg]: 0.798
• Inner Diameter [mm]: 14.1
• Manufacturer: RTS

• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN KB954.08

• Quantity: 2
• Thickness [mm]: 40
• Width [mm]: 127
• Weight [kg]: 0.31
• Bearing Type: Rolling Bearing
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Material: Plastic, Metal
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: deep groove ball thrust bearing; front
• Manufacturer: BORSEHUNG

• Quantity: 2
• Fitting Position: Front Axle
• Weight [kg]: 0.8
• Required quantity: 2
• Inner Diameter [mm]: 14
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: VIKA

• for OE number: 5Q0412249C
• Fitting Position: Front Axle
• Weight [g]: 1,123
• Supplementary Article/Info 2: with ball bearing
• Component Number: 2
• Bearing manufacturer: IMPERGOM
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: IMP

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Manufacturer: KYB
• Name: KY SM9924

Suspension: for vehicles without increased ground clearance, for vehicles without electronic suspension control Technical Information: mounting (x1) / / / Fastenings : suspension mounting bolt/screw (x2), mounting washer (x4)

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: MEY

Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF

Name: PODUSZKA AMORT. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- Z O½YSKIEM

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Number of Parts [parts]: 2
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR
• Name: SN KB657.27
• Additional information: KB657.27 SNR
• Lisainfo: KB657.27 SNR

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: SAA

• Fitting Position: Front Axle
• Manufacturer: BILSTEIN
• Name: BI 12-243945
• Quality class: Q

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BIL
• Quality class: Q

Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- LE/PR LE/PR B1

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle
• Weight [kg]: 1.3
• Supplementary Article/Info 2: with rolling bearing
• Guarantee: 5 years guarantee
• Packaging length [cm]: 15.1
• Packaging width [cm]: 8.4
• Packaging height [cm]: 14.6
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Name: KY SM1051
• Manufacturer: KYB

Technical Information: Suspension mounting (x1), separated bearing (x1) / / / Fastenings : piston rod nut (x1), suspension mounting bolt/screw (x3)

• Quantity: 2
• Fitting Position: Front Axle
• General Information: Shock absorber rubber kit; front
• Manufacturer: BORSEHUNG

• Construction Year to: 12.2017
• Fitting Position: Front Axle both sides
• Weight [kg]: 1.1
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: with rolling bearing
• Manufacturer: METALCAUCHO