• Lisainfo: Water Pump
• Additional information: Water Pump

• Quantity Unit: Kit
• Quantity: 4
• General Information: water pump repair kit
• Manufacturer: VIKA

• Number of pins (input) [-pin connector]: 3
• Number of pins (output) [-pin connector]: 2
• Plug Type: Female
• Vehicle Equipment: for vehicles with parking heater
• Number of circuits: 2
• Material: CuSn (copper-tin)
• Cable Length [mm]: 360
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Cable insulation material: Silicone
• Article number of recommended accessories: 2221059
• Manufacturer: METZGER

for OE number: 1K0965561, 1K0965561A, 1T0965561, 3C0965561, 7N0965561, 7N0965561A, 7N0965561B

• New Part:
• Housing Type: without housing
• Weight [kg]: 0.44
• Number of blades/vanes: 7
• Manufacturer: DOLZ

• Overall Height [mm]: 67
• Number of Teeth: 29
• Operating Mode: Mechanical
• Supplementary Article/Info 2: without lid
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Metal
• Water Pump Pulley Diameter [mm]: 44.9
• Manufacturer: ASHIKA

• Voltage [V]: 12
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with holder
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 05.2013
• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.32
• Always compare old and new part (in particular OE No.):
• Name: CE 22SKV032
• Manufacturer: ESEN SKV

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 29
• Number of blades/vanes: 8
• Weight [kg]: 0.43
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Number of connectors: 2
• Manufacturer: JP GROUP A/S
• Lisainfo: Additional Water Pump
• Additional information: Additional Water Pump

• Engine Code: CDAA
• Manufacturer: MAGNETI MARELLI

• General Information: water pump
• Manufacturer: VIKA

• Weight [kg]: 0.48
• Name: AI 1892
• Manufacturer: AIRTEX

• Engine Code: CDAA
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• Number of blades/vanes: 7
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: PIERBURG

• Engine Code: CDAA
• Housing Type: without housing
• Number of Teeth: 29
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without lid
• Number of blades/vanes: 6
• Water Pump Pulley Diameter [mm]: 44.9
• Impeller Diameter [mm]: 60.5
• Water pump impeller material: Metal
• Manufacturer: GRAF POMPY WODY

• Engine Code: CDAA
• for OE number: 06A 121 026 BF
• Housing Type: without housing
• Water pump impeller material: Plastic
• Manufacturer: FAI AUTOPARTS

• Operating Mode: Mechanical
• Housing Type: without housing
• Supplementary Article/Info 2: with seal ring, with gear
• Number of Teeth: 29
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic, GRP (Glass fibre Reinforced Plastic)
• New Part:
• Used part return not required:
• Observe system fill quantity:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Weight [kg]: 0.53
• Number of belts: 1
• Name: AI WPK-189201
• Manufacturer: AIRTEX

• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: VALEO

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• Water Pump Type: for timing belt drive
• Number of Teeth: 29
• reinforced version:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Article number of recommended accessories: 100 919 0032
• Housing material: Stainless Steel
• Chemical Properties: High temperature-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Operating Mode: Mechanical
• Housing material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Water pump impeller material: Metal
• Number of blades/vanes: 6
• Number of Teeth: 29
• Supplementary Article/Info 2: without coolant regulator
• Manufacturer: HEPU

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 7N0965561
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Water Pump Type: for V-ribbed belt use
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 27
• Name: VEEPUMP
• Manufacturer: SKF

• Length [mm]: 270
• Number of Teeth: 54
• Width [mm]: 12
• Tooth Pitch [mm]: 5
• Driven Units: Water Pump
• Manufacturer: BOSCH

• Driven Units: Water Pump
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 54
• Weight [kg]: 0.94
• Width [mm]: 12
• Supplementary Article/Info 2: without thermostat
• Housing Type: without housing
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 2
• Vehicle Equipment: for vehicles with auxiliary water pump
• Connector Shape: D Shape
• Housing Colour: black
• Hose Diameter [mm]: 20
• Supplementary Article/Supplementary Info: with holder
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Observe system fill quantity:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1K0965561J
• Operating Mode: Electric
• Supplementary Article/Info 2: with clip
• Name: Lisaveepump
• Manufacturer: NRF

• Vehicle configuration line / variant: AUX
• for OE number: 1K0965561J
• Operating Mode: Electric
• Name: DA DEP1011
• Manufacturer: DAYCO

• New Part:
• Housing Type: Housing with Aluminium Lid
• Weight [kg]: 1.25
• Number of blades/vanes: 7
• Manufacturer: DOLZ
• Name: DO A282TM

• Heating/Cooling: for vehicles with extra heating
• Voltage [V]: 12
• for OE number: 7N0 965 561
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with holder
• Weight [kg]: 0.431
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: D Shape
• Material: Plastic
• Operating Mode: Electric
• Voltage [V]: 12
• Name: NI 831063
• Manufacturer: NISSENS

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as brackets in the box when mounted in exposed position

• New Part:
• Housing Type: Synthetic Material Housing
• Weight [kg]: 1.1
• Number of blades/vanes: 7
• Manufacturer: DOLZ
• Name: DO A282TP

• Material: Aluminium
• General Information: water pump complete; aluminum shell
• Manufacturer: VIKA

• Water Pump Type: for timing belt drive
• Housing Type: with housing
• Pulleys: with belt pulley
• Name: Veepump
• Manufacturer: MAX

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 1K0 965 561 J
• Manufacturer: HEPU

• Engine Code: CDAA
• Name: Lisaveepump
• Manufacturer: MAG

• Fabrication Number: CPW-VW-063
• Manufacturer: NTY

• Material: Aluminium
• General Information: water pump complete; all-aluminum housing
• Manufacturer: VIKA

• Operating Mode: Electric
• Voltage [V]: 12
• Packaging length [cm]: 0.4
• Packaging width [cm]: 14
• Packaging height [cm]: 13
• Weight [kg]: 11
• for OE number: 1K0965561J, 5N0122093B

• General Information: Water pump shell with temperature regulator
• Manufacturer: BORSEHUNG

• Water Pump Type: for timing belt drive
• Housing Type: with housing
• Pulleys: with belt pulley
• Name: Veepump
• Manufacturer: MAX

• Material: Polyester Resin
• General Information: Water pump assembly; resin housing
• Manufacturer: VIKA

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: Aluminium Housing
• Water Pump Type: for timing belt drive
• Number of Teeth: 29
• Supplementary Article/Info 2: with thermostat, with belt
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Article number of recommended accessories: 100 919 0032
• Name: POMPA WODY VW 2,0TSI (MODU)
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: Aluminium Housing
• Water Pump Type: for timing belt drive
• Number of Teeth: 29
• Supplementary Article/Info 2: with thermostat
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Article number of recommended accessories: 100 919 0032
• Name: Veepump
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Number of connectors: 2
• Weight [kg]: 0.32
• for OE number: 1K0 965 561 J
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with thermostat
• Housing Type: Metal Housing
• SVHC: No SVHC present!
• Name: Veepump, mootori jahutus
• Manufacturer: INA

• Vehicle configuration line / variant: TB
• for OE number: 06H121026DN
• Weight [kg]: 1.1
• Supplementary Article/Info 2: Thermostat fitted in water pump
• Name: DA DP1982
• Manufacturer: DAYCO

• Engine Code: CDAA
• Supplementary Article/Info 2: with lid
• Manufacturer: MAGNETI MARELLI

• Engine Code: CDAA
• Housing Type: with housing
• Number of Teeth: 29
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of blades/vanes: 6
• Water Pump Pulley Diameter [mm]: 44.9
• Impeller Diameter [mm]: 60.5
• Water pump impeller material: Metal
• Name: Veepump
• Manufacturer: GRA

Supplementary Article/Info 2: with thermostat, with lid, Thermostat fitted in water pump

• Pump Number: 6H 121 010
• Engine Code: CDAA
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• for OE number: 06H 121 026 BE
• Housing material: Metal
• Supplementary Article/Supplementary Info: with gasket/seal, with temperature sensor
• Supplementary Article/Info 2: with thermostat, with coolant regulator
• Name: POMPA WODY VW 2,0TSI (MODU)
• Manufacturer: PIE

• Engine Code: CDAA
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• for OE number: 06H 121 026 DN
• Housing material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal, with temperature sensor
• Supplementary Article/Info 2: with thermostat, with coolant regulator
• Name: VEEPUMP
• Manufacturer: PIE

• Operating Mode: Mechanical
• Supplementary Article/Info 2: with thermostat, without sensor
• Housing Type: Housing with Aluminium Lid
• Fitting Position: Front
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pump Number: 06H 121 010
• Engine Code: CDAA
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• for OE number: 06H 121 026 BE
• Housing material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal, with temperature sensor
• Supplementary Article/Info 2: with thermostat, with coolant regulator
• Name: VEEPUMP
• Manufacturer: PIE

• Driven Units: Water Pump
• Supplementary Article/Supplementary Info: with water pump
• Supplementary Article/Info 2: with thermostat
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Operating Mode: Mechanical
• Housing Type: Synthetic Material Housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water pump impeller material: Metal
• Number of blades/vanes: 6
• Alternatively:
• Manufacturer: HEPU POMPY WODY

Supplementary Article/Info 2: without engine temperature sensor, Thermostat fitted in water pump

• Water pump impeller material: Grey Cast Iron, Metal
• Housing Type: with housing
• for OE number: 06H 121 026 CC
• Number of Teeth: 29
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 1.357
• Manufacturer: VAICO

Supplementary Article/Info 2: with thermostat, with clip, without sensor, with coolant regulator General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CDAA
• for OE number: 06H 121 026 N
• Housing Type: with housing
• Water pump impeller material: Plastic
• Manufacturer: FAI AUTOPARTS

• Operating Mode: Mechanical
• Housing material: Aluminium
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water pump impeller material: Metal
• Number of blades/vanes: 6
• Manufacturer: HEPU

Supplementary Article/Info 2: with belt, with bolts/screws, with engine temperature sensor, with thermal management module

• Number of sensors: 1
• Housing Type: with housing, Synthetic Material Housing
• Opening Temperature [°C]: 95
• Mounting Type: Pre-assembled
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: VEMO GERMANY

Supplementary Article/Info 2: with clip, with belt, with flange, with sensor, with thermostat General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Driven Units: Water Pump
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 54
• Weight [kg]: 1.693
• Width [mm]: 12
• Supplementary Article/Info 2: Thermostat fitted in water pump
• Housing Type: with housing
• Manufacturer: CONTITECH

• General Information: water pump complete
• Manufacturer: BORSEHUNG

• General Information: water pump complete kit
• Manufacturer: BORSEHUNG