• for OE number: K05175764AA
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Fitted Diameter [mm]: 9
• Manufacturer: KAMOKA

• for OE number: 000 905 06 00
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Guarantee: 3 years guarantee
• Number of pins: 2
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• for OE number: 000 905 61 02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• for OE number: 000 905 61 02
• Name: SW 10 94 5443
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Clamped
• Name: HE 6PT358058191
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: both sides, Rear, outer, Front, inner, Centre
• Fabrication Number: EPDC-ME-009

• Engine Code: M 276.823
• for article number: 1.880.776, 1.880.875
• Manufacturer: EPS

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

Fabrication Number: ECP-ME-008

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 1,000
• Socket colour: black

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Number of pins: 3
• Name: DE SS12020-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Fabrication Number: ECM-ME-002

• for OE number: A0035421819
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Manufacturer: BOSCH

• Fabrication Number: EBP-ME-001
• Name: NTY EBP-ME-001
• Manufacturer: NTY

• for OE number: A0005408250
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Cable Length [mm]: 915
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: KAMOKA

• Number of pins: 3
• Sensor Type: Hall Sensor, Active sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009168771
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 205 905 8503
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Rear Axle
• Overall Length [mm]: 1,015
• Length [mm]: 38
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 925
• paired article number: 31402
• Weight [kg]: 0.09
• Manufacturer: ABS

Manufacturer: BOSCH

• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Name: BS F026C00466

• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• Required quantity: 2
• Fitting Position: both sides, outer, Front
• for special equipment code: 235
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270401
• Manufacturer: HELLA

Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking) Brief Information: *** HELLA Electronics OE competence for over 60 years.

• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: grey
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: Titanium
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: grey
• Mounting Type: Bolted
• Manufacturer: HUF

General Information: After installing a new sensor, the TPM system must be reinit ialized/calibrated. The procedure refer to the owner's manua l of the car manufacturer.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Housing Colour: Orange
• Mounting Type: Bolted
• Manufacturer: HUF

• Rims: for steel rims
• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139461
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Frequency Range [MHz]: 433
• Valve colour: silver
• Tightening Torque [Nm]: 8
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Housing Colour: black/white
• Name: SK VKRA110019
• Manufacturer: SKF

• Required quantity: 4
• Fitting Position: both sides, inner, Front
• for special equipment code: 235
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141261
• Manufacturer: HELLA

Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking) Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Rims: for light alloy rims
• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139471
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Rims: for light alloy rims
• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139481
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Number of pins: 1
• Fabrication Number: EPO-ME-004

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Additional information: 120-06-045 ABAK
• Lisainfo: 120-06-045 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: silver
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 915
• Weight [kg]: 0.051
• Name: SW 10 10 7876
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV930
• Manufacturer: ESEN SKV
• Lisainfo: 17SKV930 SKV
• Additional information: 17SKV930 SKV

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 915
• Weight [kg]: 0.051
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Number of pins: 2
• Fabrication Number: EPO-ME-008

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Surface: primed
• Number of pins: 3
• Shape: angled
• Chemical Properties: Paintable
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Manufacturer: BOSCH

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Weight [kg]: 0.07
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 96SKV329
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Required quantity: 2
• Length [mm]: 1,003
• MAPP code available:
• Manufacturer: ATE

• Rims: for steel rims
• Programmed:
• Tightening Torque [Nm]: 4
• Assy./disassy. by qualified personnel required!:
• not for vehicle production country: USA
• Name: HE 6PP358139231
• Manufacturer: HELLA

Brief Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

• Required quantity: 4, 6
• for special equipment code: 235
• Fitting Position: inner, both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 23
• Height [mm]: 28.7
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: VA 890019
• Manufacturer: VALEO
• Additional information: 890019 VALEO
• Lisainfo: 890019 VALEO

Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking)

• Required quantity: 2
• for special equipment code: 235
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 23
• Height [mm]: 28.7
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: VA 890010
• Manufacturer: VALEO

Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking) Fitting Position: outer, both sides, Front, Rear, lateral installation

• Engine Code: M 276.823
• Fitting Position: Left, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 450
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.468
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: M 276.823
• Fitting Position: Right, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV905
• Manufacturer: ESEN SKV

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PR008891011
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Right
• Number of circuits: 5
• Overall Length [mm]: 400
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5175764AA
• Supplementary Article/Info 2: with seal ring