Assembly categories
Filter Braking System Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Driver Cab Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior EquipmentProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.671,
017.655, 505.550, 505.540 -
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: ELR
- Thickness [mm]: 1.4
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
- DIN/ISO: 7603
- Material: Copper
- Weight [kg]: 0.001
-
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 22
- Thickness [mm]: 1.5
- Material: Copper
- Inner Diameter [mm]: 18
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Valve stem diameter [mm]: 8
- Inner Diameter [mm]: 11.6
- Outer Diameter [mm]: 14.8
- Height [mm]: 10.9
-
Material: FPM
(fluoride rubber) - Manufacturer: ELRING
- Inner Diameter 1 [mm]: 8
- Inner Diameter 2 [mm]: 10.8
- Outer Diameter 1 [mm]: 14.2
- Height 1 [mm]: 9
-
Material: FPM
(fluoride rubber) -
Fitting Position: Intake Side,
exhaust sided - Manufacturer: CORTECO
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Alternatively:
- Name: Rongastihend
- Manufacturer: FIS
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Alternatively:
- Name: Rongastihend
- Manufacturer: FIS
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Fitting Position: frontal sided
- Inner Diameter 1 [mm]: 78
- Outer Diameter 1 [mm]: 104
- Height 1 [mm]: 11
- Dust Cover: with dust lip
-
Swirl Type: Right-
hand Twist - Manufacturer: CORTECO
- Name: CO 20025510
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 115
- Outer Diameter 1 [mm]: 140
- Height 1 [mm]: 12
- Dust Cover: with dust lip
-
Swirl Type: Left-
hand Twist - Manufacturer: CORTECO
- Name: CO 20034699
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Inner Diameter [mm]: 78
- Outer Diameter [mm]: 104
- Height [mm]: 11
-
Radial Shaft Seal Design: AW/
BS -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 78
- Outer Diameter [mm]: 104
- Height [mm]: 11
- Radial Shaft Seal Design: AB SL
-
Swirl Type: Right-
hand Twist - Manufacturer: REINZ
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 115
- Outer Diameter [mm]: 140
- Height [mm]: 13
- Radial Shaft Seal Design: AB SL
-
Swirl Type: Left-
hand Twist - Manufacturer: REINZ USZCZELKI
- Inner Diameter [mm]: 115
- Outer Diameter [mm]: 140
- Height [mm]: 12
-
Radial Shaft Seal Design: AW/
BS -
Swirl Type: Left-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks