• Fitting Position: Front Axle
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 82
• Lisainfo: Bearing for strut, without bearing, front
• Additional information: Bearing for strut, without bearing, front

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 7201592
• Manufacturer: GSP

• Fitting Position: Front Axle
• for OE number: 1J0412249
• Manufacturer: SASIC

• Fitting Position: Front Axle Left, Front Axle Right
• Base body material: Sheet Steel
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Name: Laager - K„„ndmik. VW P. GOLF 4 Z O½YSKIEM
• Manufacturer: MAX

• Quantity per packing unit: 10
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left
• Weight [g]: 65
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Name: IM 32295/1
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Height [mm]: 13
• Outer Diameter [mm]: 46
• Inner Diameter 1 [mm]: 14
• Manufacturer: OPTIMAL ZAWIESZENIE

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Quality class: PJ
• Name: Top mount left, right

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Name: GH 364709
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Height [mm]: 13.5
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager,amorditugilaager
• Manufacturer: MAX

• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: 3RG

• for OE number: 1J0 412 249
• Fitting Position: Front Axle
• Bearing Type: Angular Ball Bearing
• Material: Plastic
• Width [mm]: 13.5
• Outer Diameter [mm]: 45
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Quantity: 2
• Installatsiooni pool: Esisild
• Üldine informatsioon: suspension strut storage; front; aluminum
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: without bearing
• Alternative Repair Kit: 80001637
• Weight [kg]: 0.23
• Manufacturer: CORTECO
• Name: COC 21652788

• for OE number: 1J0512149B
• Fitting Position: Rear Axle
• Weight [g]: 104
• Name: IM 37242
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Alternative Repair Kit: 108 561
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1J0 412 331 B
• Manufacturer: GSP

• Fitting Position: Front Axle
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Height [mm]: 13.5
• Bearing Type: Ball Bearing
• Manufacturer: MEY

Name: Laager - K„„ndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-

• Materjal: Kumm
• Installatsiooni pool: üleval, Tagasild mõlemapoolselt
• Välisläbimõõt [mm]: 75
• Piirangutega toode/piirangu info 2: ilma laagrita
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Installatsiooni pool: Esisild, esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos laagriga
• Seerianumber: AD-VW-006
• Manufacturer: NTY

• Outer Diameter 1 [mm]: 65
• Height [mm]: 53
• Outer Diameter 2 [mm]: 82
• Fitting Position: Front Axle Right
• Manufacturer: SNR /NTN-SNR/
• Name: SN KBLF410.82

Vehicle Identification Number (VIN): [5J-93120 133;], [5J-95032 165;], [5J-9A508 237;], [5J-9B505 016;], [5J-9B601 132;], [5J-9K506 834;]

• Vehicle Identification Number (VIN): [5J-95032 165;], [5J-9B601 132;]
• Suspension: for vehicles with sports suspension
• Fitting Position: Right, Left, Rear Axle, Front Axle
• Outer Diameter 1 [mm]: 45
• Width 1 [mm]: 13
• Inner Diameter 1 [mm]: 14
• Manufacturer: SNR /NTN-SNR/
• Name: SN M254.01

• Construction Year to: 09.2015
• Installatsiooni pool: Esisild
• Manufacturer: OYODO

• Installatsiooni pool: esisild paremal, esisild vasakul
• Piirangutega toode/piirangu info 2: ilma laagrita
• Kaal (kg): 0,26
• Name: DY 73-24097
• Manufacturer: DYS

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 6R0 412 249
• Name: Laager,amorditugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 6R0 412 249
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Installatsiooni pool: Esisild
• Kaal (kg): 0,237
• vajaminev tükihulk: 2
• Jämedus/Tugevus (mm): 54
• Siseläbimõõt [mm]: 26
• Välisläbimõõt [mm]: 83
• Materjal: Kumm/metall
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Üldine informatsioon: Shock absorber top rubber; front
• Manufacturer: VIKA

• Installatsiooni pool: Esisild
• Manufacturer: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Esisild
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Esisild
• Kaal (kg): 0,28
• Materjal: Kumm/metall
• Siseläbimõõt [mm]: 14,2
• Välisläbimõõt [mm]: 83
• Kaal (g): 280
• Piirangutega toode/piirangu info 2: koos laagriga
• Manufacturer: METALCAUCHO

• Fitting Position: Lower, Rear Axle Left, Rear Axle Right
• for OE number: 1S0 512 335 A
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: CORTECO
• Name: COC 80001637

• Inner Diameter [mm]: 26
• Height [mm]: 54
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: FEB
• Additional information: FE09227
• Lisainfo: FE09227

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• for OE number: 1S0 512 335 A
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Manufacturer: AUTO-GH

• Installatsiooni pool: Esisild
• Manufacturer: JAPKO

• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• for OE number: 1J0412331C
• Manufacturer: SASIC

• for OE number: 1J0412331
• Fitting Position: Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Weight [g]: 273
• Supplementary Article/Info 2: without bearing
• Thickness [mm]: 54
• Name: IM 32354
• Manufacturer: ORIGINAL IMPERIUM

• Height [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 54 0012
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 815008930
• Manufacturer: FAG

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 25346 01, 36957 01
• for OE number: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Name: Laager - K„„ndmik. VW P. GOLF 4 (BEZ O½YSKA)
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity Unit: Set
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 2
• Weight [kg]: 0.237
• Fitting Position: Front Axle
• Thickness [mm]: 54
• Required quantity: 2
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: BORSEHUNG

• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.18
• Supplementary Article/Info 2: without ball bearing, with fastening material
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/OCTAVIA
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Fitting Position: Right, Left, Rear Axle
• Number of Parts [parts]: 4
• Outer Diameter 1 [mm]: 60
• Inner Diameter 1 [mm]: 11
• Name: SN KB954.10
• Manufacturer: NTN-SNR

• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Supplementary Article/Info 2: with bearing
• Required quantity: 2
• Height [mm]: 53
• Outer Diameter [mm]: 83
• Centering Diameter [mm]: 14.2
• Manufacturer: TRW

for OE number: 1J0 412 249, 1J0 412 331 B, 1J0 412 331 C, 357 412 249 A, 6K0 413 031 B SVHC: No information available, please contact the manufacturer!

• for OE number: 1J0412331B
• Fitting Position: Front Axle
• Material: Rubber/Metal
• Weight [g]: 276
• Supplementary Article/Info 2: with ball bearing
• Component Number: 2
• Bearing manufacturer: IMPERGOM
• Name: IM 37241
• Manufacturer: ORIGINAL IMPERIUM

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM

• Fitting Position: Front Axle
• Technical Information: Suspension mounting + separated suspension bearing
• Manufacturer: KYB

Name: Laager - K„„ndmik. FORD P. GALAXY/ SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO/ VW CADDY II, CORRADO, GOLF III, IV, PASSAT, POLO, SHARAN,

• Number of Parts [parts]: 2
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR
• Name: SN KB657.08

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with rolling bearing
• Guarantee: 5 years guarantee
• Weight [kg]: 0.4
• Packaging length [cm]: 8.1
• Packaging width [cm]: 8.1
• Packaging height [cm]: 9
• Manufacturer: MONROE

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. AUDI A1 (8X1, 8XK), 1.2 TFSI, 1.4 TFSI, 1.6 TDI, 2.0 TDI, 2.0 TFSI QUATTRO, A1 SPORTBACK (8XA, 8XF), 1.2 TFSI, 1.4 TFSI,

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Weight [kg]: 0.352
• Packaging length [cm]: 8.2
• Packaging width [cm]: 8.2
• Packaging height [cm]: 5.2
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Quantity Unit: Set
• Manufacturer: MEY
• Lisainfo: 1004122019/S
• Additional information: 1004122019/S

Name: Laager - K„„ndmik. AUDI P A1 (8X1, 8XA) (05/10-/)/ SEAT IBIZA V (6J1, 6J5, 6J8) (03/08-06/10), MII 10/11- KPL NA 1 STR ZE —RUB¤

• Fitting Position: Front Axle
• Name: Laager - K„„ndmik. VW P. GOLF 4 KPL.
• Manufacturer: BIL
• Quality class: Q

• Installatsiooni pool: Tagasild
• Üldine informatsioon: Rubber and dust cover kit;rear
• Manufacturer: VIKA