• Number of pins: 2
• Connector Shape: D Shape
• Manufacturer: JP GROUP A/S
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.6
• Colour Coding: green
• Number of connectors: 1
• External Thread [mm]: M10X1
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Seerianumber: ECC-AU-003
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistiku värv: roheline
• Pistikkontaktide arv: 1
• Manufacturer: NTY
• Name: NTY ECC-AU-003

• Thread Size: M10x1
• Spanner Size: 22
• Colour Coding: green
• Number of pins: 1
• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.6
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Fitting Depth [mm]: 29
• Housing Colour: black
• Manufacturer: KAMOKA

• Värv: must
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Seerianumber: ECT-VW-002
• Manufacturer: NTY
• Name: NTY ECT-VW-002

• Pressure [bar]: 6
• Housing Colour: green
• Thread Size: M10x1.0
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Lisainfo: SW90024
• Additional information: SW90024

• Engine Code: CPGA
• Colour: green
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0.5
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: CPGA
• Colour: green
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0.5
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET

• Keermemõõt: M10 x 1
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Surve (bar): 0,45
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Switch Pressure [bar]: 0.5
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Quantity: 1
• Kinnitusaukude hulk: 1
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Installatsiooniläbimõõt (mm): 9
• Värvimarkeering: roheline
• Korpusevärv: must
• Pistikukatte kuju: D-kuju, ovaalne
• Üldine informatsioon: temperature sensor
• Manufacturer: VIKA

• Quantity: 1
• General Information: Oil pressure sensor
• Manufacturer: BORSEHUNG

• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.6
• Combi Switch Function: Normally Open Contact
• Colour: green
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY
• Lisainfo: 1148200001
• Additional information: 1148200001

• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.6
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: green
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CPGA
• Colour: blue
• Operating Mode: Mechanical
• Name: LšLITI,SIDURDAMINE(GRA)
• Manufacturer: EPS

• Engine Code: CPGA
• Operating Mode: Mechanical
• Manufacturer: FACET

• Thread Size: M 10 x 1
• Control Range [bar]: 0,3-0,6
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.6
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: green
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 91 9014
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 2
• Pistikute teostus: Lamepistik
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistiku värv: must
• Seerianumber: ESS-VW-000
• Manufacturer: NTY

• Engine Code: CPGA
• Housing Colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Pikkus (mm): 24
• vajaminev tükihulk: 1
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Seerianumber: ECP-AU-029
• Manufacturer: NTY

• Engine Code: CPGA
• Housing Colour: black
• Manufacturer: FACET

• Sensor Type: NTC Sensor
• Mounting Type: Screw Connection
• Connector Shape: D Shape
• Number of pins: 2
• Socket colour: black
• for OE number: 03F919501A
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 3
• for OE number: 036 907 601 E
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: D Shape
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• for OE number: 1205185
• Manufacturer: MEAT&DORIA

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Üldine informatsioon: hall sender camshaft
• Manufacturer: VIKA

• for OE number: 03F 919 501 B
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: TRU

• Version: 1
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Kaal (kg): 0,48
• Ühenduste arv: 2
• Värv: must
• Üldine informatsioon: knock sensor
• Manufacturer: VIKA

• Number of pins: 3
• Fitting Depth [mm]: 24
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 3
• Connector Shape: D Shape
• Shape: angled
• Number of mounting bores: 1
• Supplementary Article/Info 2: with screw, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: camshaft position sensor
• Manufacturer: BORSEHUNG

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11473

• Seerianumber: ECP-AU-039
• Pistikkontaktide arv: 3
• Anduritüüp: Aktiivne andur
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Manufacturer: NTY
• Name: NTY ECP-AU-039

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Name: SW 30 10 6571
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without brake energy recovery
• Supplementary Article/Supplementary Info: without stop function
• Manufacturer: NRF

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11480

Vehicle Equipment: for vehicles without brake energy recovery, for vehicles without start-stop function

• Number of connectors: 3
• Weight [kg]: 0.023
• for OE number: 04C 906 433 G
• Supplementary Article/Info 2: with screw
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE ELEKTRYKA

• Engine Code: CPGA
• Name: EP 1.957.144
• Manufacturer: EPS

• Engine Code: CPGA
• Manufacturer: FACET

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 03F919501B, 04E919501C

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with screw
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Required quantity: 1
• Engine Code: CPGA
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

Vehicle Equipment: for vehicles without brake energy recovery, for vehicles without start-stop function

• Number of connectors: 3
• Weight [kg]: 0.023
• for OE number: 04C 906 433 G
• Supplementary Article/Info 2: with screw
• Name: SW 33 10 2812
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: DELPHI ELEKTRONIKA

Vehicle Equipment: for vehicles with brake energy recovery, for vehicles with start-stop function

• Sensor Type: Hall Sensor
• Manufacturer: FAE ELEKTRYKA

• Engine Code: CPGA
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: MEYLE

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009168741
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• for OE number: 04C 907 601K, 958 907 601 00
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Üldine informatsioon: hall sender camshaft
• Manufacturer: VIKA

• Engine Code: CPGA
• Required quantity: 1
• Name: EP 1.953.793
• Manufacturer: EPS

• Vehicle Equipment: for vehicles without start-stop function
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE ELEKTRYKA

• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Inductive Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Vehicle Equipment: for vehicles without brake energy recovery, for vehicles without start-stop function

• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

Manufacturer: MAGNETI MARELLI

• Üldine informatsioon: impulse sender; crackshaft
• Manufacturer: VIKA

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10169

• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Hall Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Manufacturer: BREMI

Vehicle Equipment: for vehicles with brake energy recovery, for vehicles with start-stop function

• Vehicle Equipment: for vehicles without start-stop function
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: VDO

• Anduritüüp: Hallsensor
• valikuliselt:
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• alternatiivne remondikomplekt: 551675
• Manufacturer: ERA

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• General Information: Crankshaft position sensor
• Manufacturer: BORSEHUNG

• Length [mm]: 62
• Width [mm]: 23
• for OE number: 036 907 601 E
• Height [mm]: 45
• Required quantity: 1
• Colour: black
• Operating Mode: Electric
• Sensor Type: Active sensor, Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring, without cable
• Housing Colour: black
• Connector Shape: D Shape
• Manufacturer: VEMO

Transmission Type: 5-Speed Manual Transmission, automatically operated General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• Weight [kg]: 0.035
• for OE number: 036 907 601 E
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

Transmission Type: 5-Speed Manual Transmission, automatically operated General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Connector Shape: oval
• Colour: light grey
• Supplementary Article/Info 2: without cable
• for OE number: 04C906433
• Manufacturer: MEAT&DORIA

Manufacturer: BOSCH

• Number of connectors: 3
• Weight [kg]: 0.035
• for OE number: 036 907 601 E
• Name: SW 30 93 7510
• Manufacturer: SWAG

Transmission Type: 5-Speed Manual Transmission, automatically operated General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Korpusevärv: must
• Kaal (kg): 0,035
• Manufacturer: ERA

Manufacturer: FAE

• Vehicle Equipment: for vehicles without start-stop function
• Manufacturer: BOSCH

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• for PR number: 7MJ, 7MM
• Installatsiooni pool: pärast katalüsaatorit
• Lambda andur: Diagnoosisond
• Pikkus (mm): 1 450
• Kaablipikkus (mm): 1 340
• Pistikkontaktide arv: 4
• Ülekandeliinide arv: 4
• Pistikukatte kuju: ovaalne
• Manufacturer: METZGER

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,15
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tehniline informatsioon: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV