Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of connectors: 2
- Material: Plastic
-
Lisainfo: Water level switch,
washer -
Additional information: Water level switch,
washer
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.008
- Supplementary Article/Info 2: with seal ring
- for OE number: 079 919 523 H S1
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: FEB
- Additional information: 107210685
- Lisainfo: 107210685
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Material: Plastic
- Weight [kg]: 0.01
-
Name: ANDUR,
PESUVEETASE - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fabrication Number: ECT-
AU- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 2
- for OE number: 06A919501
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Number of pins: 2
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV702
- Weight [g]: 15
- Name: IM 5309
- Manufacturer: ORIGINAL IMPERIUM
- Number of connectors: 2
- Colour: black
- Fitting Position: Front
- Weight [kg]: 0.004
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 06A 919 501
- Manufacturer: TRUCKTEC
-
Fabrication Number: ECT-
AU- 006 - Manufacturer: NTY
-
Name: NTY ECT-
AU- 006
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: CJXA
- Colour Coding: grey
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- General Information: temperature sensor
- Manufacturer: VIKA
- Thread Size: M20
- Number of pins: 2
- Housing Colour: grey
- Connector Shape: oval
- Manufacturer: ERA
- Engine Code: CJXA
- Colour Coding: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Engine Code: CJXA
- Fitting Position: Cylinder Head
- Sensor Type: NTC Sensor
- Number of pins: 2
- Connector Shape: oval
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV674
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
-
Fabrication Number: ECT-
VW- 007 - Manufacturer: NTY
-
Name: NTY ECT-
VW- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Colour: black
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
ktusetemperatuur - Manufacturer: MAX
- Connector Shape: oval
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: 0
- Thread Size: 0
- General Information: external temperature sensor
- Manufacturer: BORSEHUNG
- Fitting Position: Front
- Number of pins: 2
- Power [W]: 0.06
- Manufacturer: METZGER
- Sensor Type: NTC Sensor
- Mounting Type: Screw Connection
- Connector Shape: oval
- Number of pins: 2
- Socket colour: black
- for OE number: 06K919523
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
-
Fabrication Number: ECP-
AU- 037 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year to: 05.2015
- Supplementary Article/Info 2: without pipe
- Number of pins: 3
-
Name: Andur,
vntvoll - Manufacturer: MAX
- Engine Code: CJXA
- Housing Colour: grey
- Housing Type: Aluminium Housing
- Manufacturer: FACET
-
for PR number: 9AK,
KH6 - Number of pins: 2
- Vehicle Equipment: for vehicles with air conditioning
- Manufacturer Restriction: Am Verdampfer
- Power [W]: 0.06
- Manufacturer: METZGER
- Engine Code: CJXA
- Housing Colour: grey
- Housing Type: Aluminium Housing
-
Name: ANDUR,
KTUSETEMPERATUUR - Manufacturer: EPS
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU009168731
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of connectors: 3
- Weight [kg]: 0.015
- for OE number: 06H 906 433 D
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Manufacturer: NRF
- General Information: impulse sender; crackshaft
- Manufacturer: VIKA
- Thread Size: 12 mm
- Manufacturer: VERNET
- Number of connectors: 3
- Weight [kg]: 0.015
- for OE number: 06H 906 433 D
- Name: SW 33 10 3124
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Name: Andur,
vntvoll - Manufacturer: DLP
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
- General Information: Transmission speed sensor
- Manufacturer: VIKA
- for PR number: 9AK
- Number of pins: 2
- Vehicle Equipment: for vehicles with automatic climate control
- Manufacturer: METZGER
- Manufacturer Restriction: VAG
- Number of pins: 2
- Cable Length [mm]: 500
- Cable Cross Section [mm²]: 0.75
- Socket Width [mm]: 1.5
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: +125
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
tagatuli - Manufacturer: HBE
- Construction Year to: 05.2015
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- Manufacturer: VALEO
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.11
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Manufacturer: VALEO
Vehicle Equipment: for vehicles with air conditioning (manually controlled)
-
Name: CZUJNIK POZIOMU OLEJU AUDI A3 2.0TFSI 13-
- Manufacturer: MAX
- Connector Shape: D Shape
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of mounting bores: 3
- Manufacturer: ABAKUS LORO
-
Additional information: 120-
06- 018 ABAK -
Lisainfo: 120-
06- 018 ABAK
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of pins: 3
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- for manufacturer number: 1040008
- Manufacturer: KAMOKA
-
for PR number: TA8,
TT6 - Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.13
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV756
- Lisainfo: 17SKV756 SKV
- Additional information: 17SKV756 SKV
- General Information: oil level sensor
- Manufacturer: BORSEHUNG
-
for PR number: TA8,
TT6 - Number of pins: 3
- Manufacturer: METZGER
- Connector Shape: D Shape
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks