• Fitting Position: Front Axle
• Rim Hole Number: 5
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated wheel bearing
• Lisainfo: Wheel Hub
• Additional information: Wheel Hub

• Fitting Position: Front Axle
• for PR number: 1ZA, 1LD, 1LG, 1LJ
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Outer Diameter 2 [mm]: 65
• Outer Diameter 1 [mm]: 85
• Width 2 [mm]: 48
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG
• Lisainfo: 713 6109 80 FAG
• Additional information: 713 6109 80 FAG

• Pikkus (mm): 70
• Väliskeere [mm]: M16 x 1,5
• Kruvipea-/Mutriprofiil: sisehambumus
• Kvaliteet/klass: 10.9
• Installatsiooni pool: Tagasild mõlemapoolselt
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Siseläbimõõt [mm]: 30
• Piirangutega toode/piirangu info 2: koos rattakeskmega
• Seerianumber: KLT-VW-013
• Manufacturer: NTY
• Name: NTY KLT-VW-013

Installatsiooni pool: Tagasild, Tagasild vasakul, Tagasild paremal, Esisild

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Inner Diameter [mm]: 30
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 136
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 136,5
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Garantii: 4 aastat garantii
• Kaal (kg): 2,23
• Aukude arv: 5
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV011

• Fitting Position: Rear Axle
• Ääriku läbimõõt [mm]: 136,5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Laius (mm): 68
• Siseläbimõõt [mm]: 30
• Veljeaukude hulk: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Internal Toothing wheel side: 30
• Outer Diameter 2 [mm]: 136.5
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle
• Laius (mm): 67,8
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 136,5
• Manufacturer: JPN
• Lisainfo: 20L9013-JPN
• Additional information: 20L9013-JPN

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Manufacturer: JP-GROUP
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 30
• Manufacturer: GSP
• Additional information: 9230082
• Lisainfo: 9230082

• Fitting Position: Rear Axle
• Veljeaukude hulk: 5
• Siseläbimõõt [mm]: 30
• Ääriku läbimõõt [mm]: 136,5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 85
• Outer Diameter [mm]: 136
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Number of mounting bores: 3
• Outer Diameter [mm]: 136
• Outer Diameter 1 [mm]: 80
• Outer Diameter 2 [mm]: 65
• Width 2 [mm]: 48
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Aukude arv: 5
• Kaal (kg): 2,2
• Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu
• vajaminev tükihulk: 2
• Ava Ø (mm): 112
• Laius (mm): 68,5
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 136
• Laagriteostus: kuullaager
• Üldine informatsioon: wheel hub with bearing; rear
• Manufacturer: VIKA

• Name: Wheel hub
• Quality class: PJ

Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"Tagaratta laager.

• Fitting Position: Rear Axle
• Width [mm]: 68.2
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Net weight [kg]: 2.27
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Inner Diameter 2 [mm]: 30
• Manufacturer: GSP

Supplementary Article/Info 2: with bolts/screws, with integrated ABS sensor, with cover

• Fitting Position: Rear Axle
• Veljeaukude hulk: 5
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Ääriku läbimõõt [mm]: 136
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga, koos kruvidega
• Välisläbimõõt 1 [mm]: 80
• Veljeaukude hulk: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• for brake disc diameter [mm]: 288
• Fitting Position: Front Axle
• Width [mm]: 84
• Outer Diameter 2 [mm]: 136
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 36
• Välisläbimõõt [mm]: 136,5
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Garantii: 4 aastat garantii
• Kaal (kg): 3,39
• Aukude arv: 5
• Ava Ø 1 (mm): 112
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 29SKV040
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Ääriku läbimõõt [mm]: 136,4
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt 1 [mm]: 85
• Veljeaukude hulk: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: REAR LR+RE LR+RE
• for OE number: 8V0598611A
• Inner Diameter [mm]: 30
• Width 1 [mm]: 68
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 5
• Name: DA KWD1002
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Rim Hole Number: 5
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with integrated magnetic sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Kinnitusaukude hulk: 3
• Välisläbimõõt [mm]: 136
• Siseläbimõõt [mm]: 30
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Manufacturer: AIC

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos kinnitusmaterjaliga, koos kruviga, koos rasvakattega, koos rattakeskmega Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Välisläbimõõt [mm]: 85
• Installatsiooni pool: Esisild, esisild vasakul, esisild paremal
• Seerianumber: KLP-VW-023
• Manufacturer: NTY
• Name: NTY KLP-VW-023

Piirangutega toode/piirangu info 2: koos rattakeskmega, koos integreeritud magnetilise anduriga

• Fitting Position: Rear Axle
• Width [mm]: 68.2
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Tightening Torque [Nm]: 180
• Rotation angle [°]: 180
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Front Axle
• for OE number: 1K0498621
• Outer Diameter [mm]: 136
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Width [mm]: 68
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 136
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 30 94 0659
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 312
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with integrated ABS sensor
• Rim Hole Number: 5
• Manufacturer: KAMOKA

• Installatsiooni pool: taga
• Üldine informatsioon: wheelhub with bearing; rear
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 288
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 288
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with bolts/screws, with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP
• Additional information: 9336004K
• Lisainfo: 9336004K

• Fitting Position: Front Axle
• Välisläbimõõt [mm]: 136,4
• Laius 2 (mm): 48,1
• Välisläbimõõt 1 [mm]: 80
• Välisläbimõõt 2 [mm]: 65
• Kinnitusaukude hulk: 3
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Weight [kg]: 2.258
• Packaging length [cm]: 15.6
• Packaging width [cm]: 15.4
• Packaging height [cm]: 10.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 30
• Width [mm]: 68
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Installatsiooni pool: taga
• Piirangutega toode/piirangu info 2: koos poltidega
• Üldine informatsioon: wheelhub with bearing; rear; with screws
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Veljeaukude hulk: 5
• Ääriku läbimõõt [mm]: 136,4
• Välisläbimõõt 1 [mm]: 85
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• Width [mm]: 68
• Inner Diameter [mm]: 30
• Flange Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKBA 3656 SKF
• Additional information: VKBA 3656 SKF

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 30
• Width [mm]: 67.8
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Vehicle Identification Number (VIN): [8P-4-162 001;]
• Inner Diameter 1 [mm]: 30
• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Number of pins: 43
• Rotation angle [°]: 180
• Tightening Torque [Nm]: 180
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN R154.55

• Installatsiooni pool: esisild mõlemapoolselt
• Jämedus/Tugevus (mm): 85
• Laius (mm): 137
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 137
• Aukude arv: 5
• Ava Ø (mm): 112
• Manufacturer: JPN

• Fitting Position: Front Axle
• Required quantity: 2
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt 1 [mm]: 80
• Välisläbimõõt 2 [mm]: 136
• Manufacturer: KAVO

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 276, 288
• Width [mm]: 83
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 136.5, 80
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of mounting bores: 3
• Number of Teeth on input shaft: 36
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Front Axle Left, Front Axle Right
• Version: Three
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• Block Separation:
• Installatsiooni pool: Esisild
• Välisläbimõõt [mm]: 136
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Garantii: 4 aastat garantii
• Kaal (kg): 3,45
• Aukude arv: 5
• Ava Ø 1 (mm): 112
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 29SKV264
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Required quantity: 2
• Weight [kg]: 3.273
• Packaging length [cm]: 16
• Packaging width [cm]: 16
• Packaging height [cm]: 11
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 136
• Outer Diameter 2 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Quantity: 1
• Construction Year to: 06.2014
• Installatsiooni pool: Esisild
• Aukude arv: 3
• Kaal (kg): 0,765
• Piirangutega toode/piirangu info 2: ilma poltideta
• vajaminev tükihulk: 2
• Ava Ø (mm): 112
• Laius (mm): 80
• Siseläbimõõt [mm]: 27
• Välisläbimõõt [mm]: 136
• Laagriteostus: kuullaager
• Üldine informatsioon: wheel hub with bearing; front; without bolts
• Manufacturer: VIKA

• Installatsiooni pool: Tagasild
• Laius (mm): 80
• Manufacturer: FAST

• Installatsiooni pool: ees
• Üldine informatsioon: wheel hub with bearing; front
• Manufacturer: BORSEHUNG
• Lisainfo: B19118
• Additional information: B19118

• Fitting Position: Front Axle
• Required quantity: 2
• Veljeaukude hulk: 5
• Manufacturer: DRIVE

• Quantity: 1
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 85
• Kaal (kg): 3,08
• Piirangutega toode/piirangu info 2: ilma poltideta
• vajaminev tükihulk: 2
• Ava Ø (mm): 112
• Laius (mm): 137
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 137
• Laagriteostus: kuullaager
• Üldine informatsioon: wheel hub with bearing; front; without bolts
• Manufacturer: VIKA

• Fitting Position: Right, Left, Front Axle
• Supplementary Article/Info 2: with rubber mount
• Rim Hole Number: 5
• Mounting Type: Clamped
• Tightening Torque [Nm]: 200
• Rotation angle [°]: 180
• Manufacturer: SNR
• Name: SN R154.61

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 312, 340
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 137, 85
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of mounting bores: 3
• Number of Teeth on input shaft: 36
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRRE LR+FR LR+FR
• for OE number: 8S0498625A
• Inner Diameter [mm]: 29
• Width 1 [mm]: 67
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 1
• Manufacturer: DAYCO ZESTAWY LOZYSK KOL

• Fitting Position: Front Axle
• Veljeaukude hulk: 5
• Ääriku läbimõõt [mm]: 136
• Välisläbimõõt 1 [mm]: 80
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle
• for PR number: 1ZA, 1LD, 1LG, 1LJ
• Weight [kg]: 3.483
• Packaging length [cm]: 15.6
• Packaging width [cm]: 15.6
• Packaging height [cm]: 9.6
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 136.5
• Outer Diameter 1 [mm]: 85
• Outer Diameter 2 [mm]: 65
• Width 2 [mm]: 48
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• Required quantity: 2
• Flange Diameter [mm]: 136
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKBA 6556 SKF
• Additional information: VKBA 6556 SKF

• Fitting Position: Right, Left, Rear Axle, Front Axle
• Inner Diameter 1 [mm]: 28
• Width 1 [mm]: 84
• Outer Diameter 1 [mm]: 136
• Tightening Torque [Nm]: 200
• Rotation angle [°]: 180
• Manufacturer: SNR
• Name: SN R154.69

• Fitting Position: Front Axle
• Required quantity: 2
• Flange Diameter [mm]: 136.4
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 85
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKBA 7011 SKF
• Additional information: VKBA 7011 SKF

• Installatsiooni pool: ees
• Piirangutega toode/piirangu info 2: koos poltidega
• Üldine informatsioon: wheelhub with bearing; front; with screws
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.4
• Outer Diameter 2 [mm]: 65
• Outer Diameter 1 [mm]: 80
• Width 2 [mm]: 48.1
• Number of mounting bores: 3
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle, Rear Axle
• for PR number: 1ZE, 1ZF, 1ZH, 1ZJ
• Block Separation:
• Width [mm]: 48
• Thickness [mm]: 84
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 80
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 65
• Outer Diameter 2 [mm]: 137
• Weight [kg]: 3.17
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear Axle
• for PR number: 1ZE, 1ZF, 1ZH, 1ZJ
• Block Separation:
• Width [mm]: 48
• Thickness [mm]: 84
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 80
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 65
• Outer Diameter 2 [mm]: 137
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 30 94 6334
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• jälgida mõõtu:
• Välisläbimõõt 1 [mm]: 85
• Välisläbimõõt 2 [mm]: 136
• Manufacturer: METZGER

Piirangutega toode/piirangu info 2: koos rattakeskmega, koos integreeritud magnetilise anduriga