• Fitting Position: outer, Rear Axle, Lower
• Vehicle configuration line / variant: AT WHEEL CARRIER
• for PR number: 0N4
• Article number of recommended accessories: 8500 298001
• Control/Trailing Arm Type: Control Arm
• Width [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Mounting Type: Rubber-Metal Mount
• Lisainfo: AUDI, SEAT, SKODA, VW
• Additional information: AUDI, SEAT, SKODA, VW

Technical Information: "See accessories list for bolt kit, bolts are not included"

• Fitting Position: Front Axle Left, Front Axle Right, Front
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Outer Diameter [mm]: 37
• Inner Diameter [mm]: 12
• Width [mm]: 29
• Replace in pairs only:
• Manufacturer: TOPRAN

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, outer General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12
• Weight [kg]: 0.153
• Fitting Position: both sides, Front, Front Axle
• Required quantity: 2
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. POLO/A2/FABIA 02-
• Manufacturer: TED

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Fabrication Number: ZTP-VW-001A
• Manufacturer: NTY

Fitting Position: Front Axle, inner, in front of axle, Left, Right, Lower

• Axle: Multi-link Axle
• for PR number: 0N4
• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wheel bearing housing
• Additional information: Rubber mount for wheel bearing housing

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Manufacturer: MERTZ

• Fitting Position: Lower, Lower Front Axle
• for OE number: 1K0 407 182
• Manufacturer: GSP

• Fitting Position: Rear Axle both sides, Lower, outer
• for OE number: 1K0 505 553
• Manufacturer: GSP

• Fitting Position: Front Axle, Front
• Total Length [mm]: 54
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 12
• Name: COC 80005079
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Quality: OE Performance
• Colour: silver
• Weight [g]: 180
• Manufacturer: GATES

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Width [mm]: 40
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Manufacturer: FAST

• Quantity per packing unit: 2
• Axle alignment required after fitting:
• for OE number: 1K0 505 553 A
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.133
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Fitting Position: outer, both sides, Rear, Rear Axle, Lower
• Weight [kg]: 0.161
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37.1
• Name: TG 00720911
• Manufacturer: TEDGUM

• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle, Centre
• for OE number: 1K0 505 541 B
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Thickness [mm]: 54
• Outer Diameter 1 [mm]: 28
• Outer Diameter 2 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Manufacturer: BGA

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 242
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 54
• Name: IM 1620
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: outer, Right, Left, Rear Axle
• Total Length [mm]: 49.8
• Outer Diameter [mm]: 37.6
• Inner Diameter [mm]: 12.1
• Name: COC 80005462
• Manufacturer: CORTECO

• Fitting Position: Rear Axle Right, Rear Axle Left
• Height [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Control/Trailing Arm Type: for trailing arm
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: MAX

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 54
• Name: ALT 81191AL
• Manufacturer: ALTE AUTOMOTIVE

• Weight [kg]: 0.14
• Inner Diameter [mm]: 12
• Fitting Position: inner, Rear Axle Upper
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Outer Diameter [mm]: 38.8
• Manufacturer: TEDGUM_TD

• Production date from: 09/12
• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 5Q0407182A
• Manufacturer: SASIC
• Additional information: 9001759
• Lisainfo: 9001759

• Fitting Position: Rear Axle, outer, Lower
• Axle: Multi-link Axle
• for PR number: 0N4
• Inner Diameter 1 [mm]: 49
• Outer Diameter 1 [mm]: 12
• Thickness 1 [mm]: 38
• Manufacturer: DELPHI
• Name: DE TD1058W

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 53
• Manufacturer: DELPHI
• Name: DE TD521W

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.183
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF5/JETT3/
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Lower, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 50
• Name: ALT 94739AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle both sides, Upper, outer
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.125
• Material: Rubber/Metal
• Thickness [mm]: 45
• Required quantity: 2
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 39, 24
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left, Rear Axle Right, Centre
• Material: Rubber/Metal
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Manufacturer: MERTZ

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.124
• Material: Rubber/Metal
• Thickness [mm]: 50
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Material: Rubber/Metal
• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Manufacturer: MERTZ

• for PR number: 0N4
• Axle: Multi-link Axle
• Fitting Position: outer, Rear Axle Right, Rear Axle Left, Lower
• Height [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW T. A3/GOLF5/TOU
• Manufacturer: MEY

• Quantity per packing unit: 2
• Fitting Position: Front, Front Axle both sides
• Thickness [mm]: 54
• Weight [kg]: 0.187
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 28, 48
• Mounting Type: Rubber-Metal Mount
• Manufacturer: METALCAUCHO

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.187
• Observe service information:
• Name: SW 30 92 4390
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 5Q0407182A
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: DA DSS1079
• Manufacturer: DAYCO

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF5/JETT3/PASSAT/TOURAN
• Manufacturer: MEY

• Inner Diameter [mm]: 12
• Fitting Position: Rear Axle, Front, both sides
• Required quantity: 2
• Weight [kg]: 0.17
• Outer Diameter [mm]: 60.2
• Control/Trailing Arm Type: for trailing arm
• Manufacturer: TEDGUM

• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.18
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: for trailing arm
• Quantity per axle: 2
• Article number of recommended accessories: 38906 01, 43359 01, 44089 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Control/Trailing Arm Type: for trailing arm
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW T. A3/GOLF5/TOU
• Manufacturer: MEY
• Lisainfo: 1005050014
• Additional information: 1005050014

• Thickness [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37.8
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, outer, Lower, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.124
• Name: Puks - K„„ndmik VW T. A3/GOLF5/TOU
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.205
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Packaging length [cm]: 5.4
• Packaging width [cm]: 4.8
• Packaging height [cm]: 4.8
• Manufacturer: FEBEST

• Fitting Position: outer, Rear Axle
• Required quantity: 2
• Weight [g]: 115
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Length [mm]: 50
• Name: IM 1724
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle both sides
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, inner, Left, Upper, Right
• Material: Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 93
• Length 1 [mm]: 23
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 39
• Name: IM 1619
• Manufacturer: ORIGINAL IMPERIUM

• Weight [kg]: 0.13
• Outer Diameter [mm]: 38.4
• Fitting Position: outer, Rear Axle Upper
• Inner Diameter [mm]: 14
• Required quantity: 2
• Name: TG 00720904
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle, Lower, outer
• Axle: Independent wheel suspension
• for PR number: 0N4
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 37.4
• Width 1 [mm]: 28
• Width 2 [mm]: 50
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Height [mm]: 64
• Name: ALT 91581AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Thickness [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, outer, Lower, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.124
• Name: SW 30 92 9938
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 09/12
• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• for OE number: 5Q0505541A
• Manufacturer: SASIC

• Production date from: 01/13
• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• for OE number: 5Q0407183K
• Manufacturer: SASIC

• Fitting Position: Centre, inner, Rear Axle
• Weight [kg]: 0.23
• Packaging length [cm]: 6
• Packaging width [cm]: 4.1
• Packaging height [cm]: 4.1
• Manufacturer: FEBEST

• Fitting Position: inner, Rear Axle Lower, in front of axle
• Weight [kg]: 0.121
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.9
• Manufacturer: FEBEST

• Fitting Position: Rear
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Production date from: 29/05/12
• Fitting Position: Rear Axle, Front, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38.6
• for OE number: Part of 5Q0505323D
• paired article number: 2256143
• Manufacturer: SASIC

• Fitting Position: Front
• General Information: wishbone arm; front
• Manufacturer: VIKA

• Fitting Position: Rear Axle, both sides, Rear, Lower, outer
• Quantity per axle: 2
• Article number of recommended accessories: 38000 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI
• Quantity per packing unit: 2

SVHC: No information available, please contact the manufacturer!

• Weight [kg]: 0.074
• Fitting Position: Rear Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 38.1
• Length [mm]: 45
• Manufacturer: RTS

• Fitting Position: outer, Rear Axle Lower
• Weight [kg]: 0.185
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.8
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik VW P. GOLF7/A3 12-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Upper, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Length [mm]: 45
• Manufacturer: RTS

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Lower, Lower Front Axle
• for OE number: 5Q0 407 183 G
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Rear, Left, Right, Front Axle
• Weight [g]: 352
• Outer Diameter 2 [mm]: 65
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 30
• Length [mm]: 50
• Name: IM 1308
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower Front Axle, behind the axle
• Weight [kg]: 0.301
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Lower, Front
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.2
• Width 1 [mm]: 45
• Width 2 [mm]: 64
• SVHC: No SVHC present!
• Manufacturer: FAG

Name: TULEJA WAH. VW T. A3 (8V1, 8VK) —REDNICA 12,3X60,2 SZEROKOS 45/64

• Name: Puks
• Manufacturer: LMI

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Front, outer SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Lower, Rear
• Weight [kg]: 0.167
• Packaging length [cm]: 5
• Packaging width [cm]: 3.7
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST