• Supplementary Article/Info 2: with plug
• Number of pins: 2
• for OE number: 4F0973702
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• for OE number: 4F0973702
• Manufacturer: ABAKUS LORO
• Lisainfo: ABA120-00-243
• Additional information: ABA120-00-243

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of Teeth: 28
• Housing Type: without housing
• Impeller Diameter [mm]: 63
• Manufacturer: KAMOKA

• Housing Type: without housing
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: BGA

• Operating Mode: Electric
• Fabrication Number: CPZ-VW-005
• Manufacturer: NTY

• Number of blades/vanes: 6
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without thermostat
• Name: Water pump
• Quality class: PJ

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl) Lisainfo: "Tootja: SRL
A1 (8X1), 05.10-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A1 (8X1), 05.10-
(kvaliteediklass: PJ)"

• Housing Type: without housing
• Number of Teeth: 28
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without lid
• Number of blades/vanes: 6
• Water Pump Pulley Diameter [mm]: 43.4
• Impeller Diameter [mm]: 63
• Water pump impeller material: Metal
• Manufacturer: GRAF POMPY WODY

• Number of Teeth: 28
• Operating Mode: Mechanical
• Housing Type: without housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of blades/vanes: 6
• Belt Pulley Ø [mm]: 49.5
• Number of Gaskets/Seals/Seal Rings: 2
• Manufacturer: OPTIMAL ZAWIESZENIE

• General Information: solenoid valve
• Manufacturer: VIKA

• for OE number: 2Q0 965 567
• Manufacturer: KAMOKA

• General Information: water pump; without variable flow
• Manufacturer: VIKA

• Quantity: 1
• Construction Year to: 05.2013
• Pulleys: with belt pulley
• Housing Type: with housing
• Water Pump Type: for timing belt drive
• General Information: water pump
• Manufacturer: VIKA

• Operating Mode: Mechanical
• for OE number: 04E121600CS
• Manufacturer: SASIC

• Construction Year to: 05.2013
• Supplementary Article/Info 2: Thermostat fitted in water pump, with lid
• Pulleys: with belt pulley
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 28
• Belt Pulley Ø [mm]: 43
• Weight [kg]: 1.12
• Name: VA 529306
• Manufacturer: VALEO

• Housing Type: without housing
• Packaging length [cm]: 21
• Packaging width [cm]: 17.1
• Packaging height [cm]: 15.1
• Weight [kg]: 0.882
• Manufacturer: AKSDASIS

• Fabrication Number: CPZ-VW-019
• Operating Mode: Electric
• Manufacturer: NTY
• Name: NTY CPZ-VW-019

• Lisainfo: Water Pump
• Additional information: Water Pump

• Construction Year to: 05.2013
• Manufacturer: DENCKERMANN FILTRY

• for PR number: 8Z4, 8Z5, DB1, DB0
• Block Separation:
• Operating Mode: Electric
• Lisainfo: Additional Water Pump
• Additional information: Additional Water Pump

• Operating Mode: Mechanical
• Housing Type: Synthetic Material Housing
• Fabrication Number: CPW-VW-053
• Manufacturer: NTY

Supplementary Article/Info 2: with coolant regulator, Thermostat fitted in water pump

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 0.924
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Supplementary Article/Info 2: with fastening material
• Manufacturer: NRF

• Vehicle configuration line / variant: >0413 # 0513>
• for OE number: 04E121600CB
• Weight [kg]: 1.1
• Manufacturer: DAYCO POMPY WODY

• Weight [kg]: 1.154
• Packaging length [cm]: 20
• Packaging width [cm]: 15
• Packaging height [cm]: 22.5
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• Manufacturer: CONTITECH

• Construction Year to: 05.2013
• Supplementary Article/Info 2: with thermostat
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 21703

• Operating Mode: Mechanical
• Lisainfo: Water Pump
• Additional information: Water Pump

• Construction Year to: 04.2013
• Housing Type: without housing
• Weight [kg]: 0.94
• Manufacturer: DOLZ
• Name: DO A234

• Driven Units: Water Pump
• Packaging length [cm]: 23.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 20.9
• Number of Teeth: 81
• Weight [kg]: 1.414
• Width [mm]: 10
• Housing Type: without housing
• Manufacturer: CONTINENTAL CTAM

• Construction Year to: 05.2013
• Driven Units: Water Pump
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES

• Number of Teeth: 81
• Width [mm]: 10
• Number of belts: 1
• for article number: A239
• Manufacturer: DOLZ POMPY WODY

• Construction Year from: 05.2013
• Driven Units: Water Pump
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES-ZESTAWY

• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: without holder
• Manufacturer: BOSCH

• Quantity: 1
• Construction Year to: 05.2013
• Pulleys: with belt pulley
• Housing Type: with housing
• Water Pump Type: for timing belt drive
• General Information: water pump complete; 5 tube
• Manufacturer: VIKA

• Water pump impeller material: Plastic
• Housing Type: with housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with belt, Thermostat fitted in water pump
• Number of Teeth: 28
• Technical Information: SKF Aquamax
• Name: SK VKPA81341
• Manufacturer: SKF

• Water Pump Type: for tooth belt accessory drive
• Water pump impeller material: Plastic
• Belt Width [mm]: 10
• for OE number: 04E 121 605 L
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 81
• Manufacturer: SKF NAPINACZE POMPY

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: without coolant regulator
• Number of blades/vanes: 6
• Manufacturer: HEPU

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 5G0 965 567
• Supplementary Article/Supplementary Info: with holder
• Flow rate [l/h]: 500
• Manufacturer: HEPU

• Operating Mode: Electric
• Voltage [V]: 12
• Weight [kg]: 0.4
• Packaging length [cm]: 20
• Packaging width [cm]: 10
• Packaging height [cm]: 10

• New Part:
• Construction Year from: 05.2013
• Manufacturer: DOLZ
• Name: DO A262
• Additional information: A-262 DOLZ
• Lisainfo: A-262 DOLZ

• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: with holder
• Manufacturer: BOSCH

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -05/13>
• Number of Teeth: 163
• Width [mm]: 20
• Length [mm]: 1,141
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Length 1 [mm]: 405
• Number of belts: 2
• 2 Belts:
• Pulleys contained: 2
• Weight [kg]: 1.9
• Name: DA KTBWP8191
• Manufacturer: DAYCO

• for OE number: 5Q0 965 567
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with holder
• SVHC: No SVHC present!
• Manufacturer: INA-POMPY WODY

• Housing Type: with housing
• Cooling Hose: from connecting pipe to engine cooler
• Packaging length [cm]: 29.8
• Packaging width [cm]: 17.5
• Packaging height [cm]: 14.5
• Weight [kg]: 1.522
• Manufacturer: AKSDASIS

• Construction Year to: 05.2013
• Opening Temperature [°C]: 105, 87
• Housing Type: with housing
• Number of Teeth: 28
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with lid, Thermostat fitted in water pump
• Number of blades/vanes: 6
• Water Pump Pulley Diameter [mm]: 43.4
• Impeller Diameter [mm]: 63
• Water pump impeller material: Metal
• Manufacturer: GRAF POMPY WODY

• Housing Type: with housing
• Packaging length [cm]: 29.8
• Packaging width [cm]: 17.5
• Packaging height [cm]: 14.5
• Weight [kg]: 1.44
• Manufacturer: AKSDASIS

• for OE number: 04E121600H
• Housing Type: Synthetic Material Housing
• Weight [g]: 1,569
• Supplementary Article/Info 2: with thermostat, Thermostat fitted in water pump
• Opening Temperature [°C]: 80, 87
• Name: IM 90734
• Manufacturer: ORIGINAL IMPERIUM

• Number of Teeth: 87
• Width [mm]: 10
• Number of belts: 2
• for article number: A234
• Manufacturer: DOLZ
• Name: DO KD150

• New Part:
• Housing Type: with housing
• Weight [kg]: 1.54
• Manufacturer: DOLZ
• Name: DO A239

• Construction Year to: 04.2013
• Housing Type: with housing
• Weight [kg]: 1.53
• Manufacturer: DOLZ
• Name: DO A235

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Aluminium
• Number of Teeth: 28
• Supplementary Article/Info 2: with thermostat
• Number of blades/vanes: 6
• Weight [kg]: 1.53
• for OE number: 04E 121 600 CS
• Housing Type: with housing
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Pin Shape: Flat
• Plug Type: Male
• Supplementary Article/Info 2: with clip
• Operating Mode: Electric
• Manufacturer: GATES

• Construction Year to: 05.2013
• Driven Units: Camshaft, Water Pump
• Article number of the recommended special tool: GAT5145A, GAT4844, GAT5169
• Observe technical data:
• Manufacturer: GATES-ZESTAWY

• Construction Year to: 05.2013
• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 28
• Supplementary Article/Info 2: with thermostat
• Number of blades/vanes: 6
• Weight [kg]: 1.53
• Housing Type: with housing
• for OE number: 04E 121 600 CR
• Supplementary Article/Supplementary Info: with seal rings
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 1.92
• Packaging length [cm]: 20
• Packaging width [cm]: 15
• Packaging height [cm]: 22.5
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: Metal Housing
• Manufacturer: CONTINENTAL CTAM

• Water Pump Type: for tooth belt accessory drive
• Housing Type: with housing
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Observe service information:
• SVHC: No SVHC present!
• Name: LU 530074330
• Manufacturer: INA

• Construction Year from: 05.2013
• Driven Units: Camshaft, Water Pump
• Article number of the recommended special tool: GAT5145A, GAT4844, GAT5169
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES-ZESTAWY

• Housing Type: with housing
• Number of Teeth 1: 163
• Width 1 [mm]: 20
• Supplementary Article/Info 2: with lid
• Water Pump Type: for timing belt drive
• Manufacturer: METELLI ROZRZAD

• Engine Code: CJZA
• Production date to: 12.05.2013
• for OE number: 04E 121 600 DG
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with thermostat, with coolant regulator
• Manufacturer: PIERBURG

General Information: Including pump and thermostat housing. Thermostat housing has ONE bypass.

• Supplementary Article/Info 2: without thermostat, with bolts/screws
• Number of belts: 2
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Number of Teeth 2: 163
• Width 2 [mm]: 20
• Pulleys contained: 2
• Manufacturer: HEPU ZESTAWY ROZRZĄDU

• Construction Year to: 04.2013
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gaskets/seals
• Housing Type: Synthetic Material Housing
• Manufacturer: HEPU POMPY WODY

Supplementary Article/Info 2: with thermal management module, without bore for sensor

• Construction Year to: 04.2013
• Water Pump Type: for timing belt drive
• Housing Type: with housing
• Pulleys: with belt pulley
• SVHC: No SVHC present!
• Manufacturer: INA

• Construction Year from: 05.2013
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gaskets/seals
• Housing Type: Synthetic Material Housing
• Manufacturer: HEPU

Supplementary Article/Info 2: with thermal management module, with bore for sensor

• Construction Year from: 06.2013
• Cooling Hose: from connecting pipe to engine cooler
• Housing Type: with housing
• Pulleys: with belt pulley
• Opening Temperature [°C]: 87, 97
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 538036310

• Driven Units: Camshaft, Water Pump
• Packaging length [cm]: 23.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 20.9
• Weight [kg]: 2.498
• Width 1 [mm]: 20
• Width 2 [mm]: 10
• 2 Belts:
• Number of Teeth 2: 81
• Number of Teeth 1: 163
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: CONTINENTAL CTAM

• Quantity: 1
• General Information: water pump
• Manufacturer: BORSEHUNG

• General Information: water pump; with toothed belt;1.0;1.2;1.6
• Manufacturer: BORSEHUNG

• Construction Year from: 05.2013
• Supplementary Article/Info 2: Thermostat fitted in water pump, with bolts/screws
• Number of belts: 2
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Number of Teeth 2: 163
• Width 2 [mm]: 20
• Pulleys contained: 2
• Manufacturer: HEPU ZESTAWY ROZRZĄDU

• General Information: water pump complete;with water pump repair kit;ITW
• Manufacturer: VIKA

• for manufacturer number: INA
• Supplementary Article/Info 2: with belt
• General Information: water pump complete;with belt
• Manufacturer: BORSEHUNG