Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Wheel Side
- Joint Type: CV Joint
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 59
- Diameter 1 [mm]: 22
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Fitting Position: Wheel Side
- Joint Type: CV Joint
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59
- Diameter 1 [mm]: 28
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Additional information: 7274 KAMOKA
- Lisainfo: 7274 KAMOKA
- Transmission Type: Automatic Transmission
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Length [mm]: 105
-
Thread Size: M16x1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 53
- Diameter 1 [mm]: 98
- Outer Diameter 1 [mm]: 59.6
- Outer Diameter 2 [mm]: 98
- Manufacturer: BGA
- Quantity: 2
- Fitting Position: Front Axle
- Transmission Type: Manual Transmission
- Number of Teeth: 33
- Diameter [mm]: 100
- Internal Toothing wheel side: 33
- Manufacturer: VIKA
General Information: c.v.joint; inner; 33teeth; MT; 100MM; Inner tooth33mm
-
Fitting Position: Wheel Side,
Front Axle - Length [mm]: 105
-
Thread Size: M16X1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59.5
-
Joint Type: 6-
ball joint - Technical Information Number: Original design
- Manufacturer: GSP
-
Transmission Type: 6-
Speed Manual Transmission - Length [mm]: 32
- Internal Toothing differential side, conn. to transmission: 28
- for OE number: 1K0407331
-
Technical Information Number: Non-
Original design - Manufacturer: GSP POLOSIE I PRZEGUBY
Fitting Position: Front Axle Left, Front Axle Right, transmission sided
-
Fitting Position: Front Axle Left,
transmission sided - Length [mm]: 32
- Internal Toothing differential side, conn. to transmission: 28
- for OE number: 7E0498103
-
Technical Information Number: Original design,
VL - Manufacturer: GSP
-
Transmission Type: 6-
Speed Automatic Transmission -
Fitting Position: Wheel Side,
Front Axle - Sealing Ring Diameter [mm]: 59.5
- Internal Toothing wheel side: 27
- External Toothing wheel side: 36
- Outer Diameter [mm]: 100.1
- Manufacturer: LPR
-
Fabrication Number: NPW-
VW- 013 - Manufacturer: NTY
-
Name: NTY NPW-
VW- 013
Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Manual Transmission, Manual Transmission, Dual-Clutch Transmission, Automatic Transmission, 5-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Special Purpose Vehicle: for taxis
- Block Separation:
- Engine Code: CRMB
-
Fitting Position: Front Axle,
Wheel Side - External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59.5
- Joint Type: CV Joint
- Length [mm]: 105
-
Thread Size: M16x1,
5 - Surface: Powder coated
-
Name: Liigendlaager,
veovoll - Manufacturer: MEY
Transmission Type: 6-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission
-
Fitting Position: Wheel Side,
Front Axle - Thread Size: M16x1.5
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 59.5
- Outer Diameter [mm]: 90
- Bellows Material: Rubber
-
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: MEP
-
Lisainfo: 15-
1467 MET -
Additional information: 15-
1467 MET
-
Fitting Position: transmission sided,
Front Axle - Outer Diameter [mm]: 108
- Internal Toothing differential side, conn. to conn. shaft: 28
- Manufacturer: LPR
-
Fitting Position: Front Axle,
transmission sided - Internal Toothing differential side, conn. to conn. shaft: 28
- Outer Diameter [mm]: 108
- Joint Type: Flexible Joint Disc
- Length [mm]: 64
-
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Joint Type: CV Joint
- Length [mm]: 105
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59.5
-
Bellows Material: TPE
(thermoplastic elastomer) - Manufacturer: FAST
-
Fitting Position: Front Axle,
transmission sided - Vehicle Identification Number (VIN) from: 5F...D...000001
-
Transmission Type: 6-
Speed Manual Transmission - Internal Toothing differential side, conn. to conn. shaft: 28
- Outer Diameter [mm]: 108
- Bellows Material: Thermoplast
- Length [mm]: 32
- SVHC: No SVHC present!
-
Name: Liigendlaager,
veovoll - Manufacturer: FAG
- Fitting Position: Front Axle
- Length [mm]: 105
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59.5
- Manufacturer: MAGNETI MARELLI
- Name: MM TOJ0312
- Engine Code: CRMB
-
Transmission Type: 6-
Speed Automatic Transmission -
Fitting Position: Wheel Side,
Front Axle - Length [mm]: 105
- Outer Diameter [mm]: 100
-
External Thread Size: M16 x 1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59.5
- Weight [kg]: 2.6
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: transmission sided
- Internal Toothing differential side, conn. to conn. shaft: 34
- Outer Diameter [mm]: 119
- Joint Type: Tripod Joint
- Length [mm]: 87
-
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: MAX
-
Fitting Position: Wheel Side,
Front Axle - Sealing Ring Diameter [mm]: 59.5
- Outer Diameter [mm]: 90
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Manufacturer: LPR
- Additional information: KAD534 LPR
- Lisainfo: KAD534 LPR
-
Fitting Position: Front Axle Right,
Front Axle Left - External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- General Information: c.v.joint; outer; Inner tooth27mm; outer tooth36mm
- Manufacturer: VIKA
-
Transmission Type: 6-
Speed Manual Transmission - Length [mm]: 32
- Manufacturer: DRIVE
Fitting Position: Front Axle Left, Front Axle Right, transmission sided
-
Fitting Position: Front Axle,
Wheel Side -
Thread Size: M16x1,
5 - Outer Diameter [mm]: 90
- Internal Toothing wheel side: 30
- Length [mm]: 95.5
- Sealing Ring Diameter [mm]: 59.5
- External Toothing wheel side: 36
- Weight [kg]: 2.262
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN): [1M-
3- 109 001;], [1M- 3- 109001;], [8L- X- 098488;] - External Toothing differential side: 28
- Inner Diameter 2 [mm]: 108
- Length 2 [mm]: 32
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN IJK54.006
Fitting Position: Front Axle Left, transmission sided, Front Axle Right
- Length [mm]: 86
- Internal Toothing differential side, conn. to transmission: 34
-
Joint Type: Tripod Joint
(AAR) -
Technical Information Number: AAR,
Original design - Manufacturer: GSP
Fitting Position: Front Axle Left, Front Axle Right, transmission sided Transmission Type: Automatic Transmission, 6-Speed Dual-Clutch Transmission
-
Fitting Position: Front Axle,
Wheel Side - Transmission Type: Automatic Transmission
- Number of Gears: 6 Speed
- Thread Size: M16x1.5
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59.4
- Outer Diameter [mm]: 99.9
- Bellows Material: Rubber
-
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: MEP
- Transmission Type: Automatic Transmission
-
Fitting Position: Front Axle,
Wheel Side - Weight [kg]: 2.729
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59
- Outer Diameter [mm]: 100
- Joint Type: CV Joint
- Packaging length [cm]: 18
- Packaging width [cm]: 10.5
- Packaging height [cm]: 10.5
- Manufacturer: FEBEST
- Model Year to: 2016
-
Fitting Position: Wheel Side,
Front Axle - Weight [kg]: 2.553
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59
- Outer Diameter [mm]: 97
- Packaging length [cm]: 20
- Packaging width [cm]: 10.5
- Packaging height [cm]: 10.5
- Manufacturer: FEBEST
-
Engine Code: CKFC,
CRMB -
Fitting Position: Wheel Side,
Front Axle -
Thread Size: M16x1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59.5
- Outer Diameter [mm]: 98
- Joint Type: CV Joint
-
Machined: with groove in inner part
(middle) -
Technical Information: Pre-
greased joint -
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: SKF
Transmission Type: 6-Speed Dual-Clutch Transmission, 6-Speed Automatic Transmission, 6-Speed Manual Transmission
- Sealing Ring Diameter [mm]: 59.5
-
Thread Size: M16x1,
5 - External Toothing wheel side: 36
- Length 2 [mm]: 105
- Internal Toothing wheel side: 27
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Name: SN OJK54.035
- Manufacturer: SNR
-
Engine Code: CRMB,
CKFC -
Transmission Type: 6-
Speed Manual Transmission -
Fitting Position: Front Axle,
transmission sided - Length [mm]: 64.1
- Internal Toothing differential side, conn. to conn. shaft: 28
- Outer Diameter [mm]: 108
- Joint Type: Flexible Joint Disc
-
Machined: with groove in inner part
(inside) -
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: SKF
- Engine Code: CKFC
-
Transmission Type: 6-
Speed Dual- Clutch Transmission -
Fitting Position: transmission sided,
Front Axle - Length [mm]: 86.5
- Internal Toothing differential side, conn. to conn. shaft: 34
- Outer Diameter [mm]: 119
- Number of Holes: 6
- Joint Type: Tripod Joint
-
Machined: with groove in inner part
(inside) -
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: SKF
- Transmission Type: Manual Transmission
- for PR number: G0K
-
Fitting Position: Front Axle,
transmission sided - Weight [kg]: 2.46
- Internal Toothing differential side, conn. to transmission: 28
- Sealing Ring Diameter [mm]: 108
- Outer Diameter [mm]: 107
- Joint Type: Flexible Joint Disc
- Packaging length [cm]: 18
- Packaging width [cm]: 11
- Packaging height [cm]: 11
- Manufacturer: FEBEST
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right -
Transmission Type: 6-
Speed Automatic Transmission - Joint Type: CV Joint
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- Length [mm]: 105
- Thread Size: M16X1.5
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
-
Name: Liigendlaager,
veovoll - Manufacturer: GKN
Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!
-
Transmission Type: 6-
Speed Dual- Clutch Transmission - Joint Type: Tripod Joint
- Internal Toothing differential side, conn. to conn. shaft: 34
- Machined: without groove in internal component
- Joint Diameter [mm]: 86
- Length [mm]: 86
- Bore Diameter [mm]: 10.1
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 100
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
-
Name: Liigendlaager,
veovoll - Manufacturer: GKN
Fitting Position: Front Axle Left, Front Axle Right, transmission sided
-
Transmission Type: 6-
Speed Manual Transmission - Joint Type: Flexible Joint Disc
- Internal Toothing differential side, conn. to conn. shaft: 28
- Machined: without groove in internal component
- Joint Diameter [mm]: 108
- Length [mm]: 32
- Supplementary Article/Info 2: with cap
- Bore Diameter [mm]: 10.2
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 94
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
-
Name: Liigendlaager,
veovoll - Manufacturer: GKN
Fitting Position: Front Axle Left, Front Axle Right, transmission sided
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Block Separation:
- Engine Code: CKFC
- Joint Type: CV Joint
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Machined: with groove in internal component
- Dust Cover: without dust cover
- Joint Diameter [mm]: 98
- Length [mm]: 105
- Thread Size: M16x1.5
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
-
Name: Liigendlaager,
veovoll - Manufacturer: GKN
Transmission Type: 6-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!
- Model Year from: 2017
-
for PR number: TR1,
TS1 -
Transmission Type: 7-
Speed Dual- Clutch Transmission -
Transmission ID: DQ381-
7F -
Fitting Position: transmission sided,
Front Axle Right - Length [mm]: 181
- External Toothing differential side: 37
- Internal Toothing differential side, conn. to transmission: 34
- Sealing Ring Diameter [mm]: 40
- Joint Type: Tripod Joint
-
Machined: with groove in inner part
(inside) - Supplementary Article/Supplementary Info: with accessories
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks