• Engine Code: CHZD
• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• Manufacturer: JP GROUP A/S
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Name: NIVOOLšLITI, PESUVEEKOGUS
• Manufacturer: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Värvimarkeering: hall
• Pistikkontaktide arv: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• OE-numbri jaoks: 95510612500
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: with plug
• Number of wires (repair kit, cable set): 2
• Conductor Number: 2
• Assy./disassy. by qualified personnel required!:
• Name: Kaabli paranduskomplekt, v„listemperatuuri andur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Weight [kg]: 0.015
• Number of connectors: 2
• Screw length below head [mm]: 20
• Colour: black
• Colour Coding: grey
• General Information: temperature sensor; black
• Manufacturer: VIKA

• Colour Coding: grey
• Fabrication Number: ECT-VW-000
• Manufacturer: NTY
• Name: NTY ECT-VW-000

• Installatsiooni sügavus (mm): 29
• Korpusevärv: must
• Manufacturer: KAMOKA

• Pistikukatte kuju: ovaalne, D-kuju
• Värvimarkeering: hall
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Fabrication Number: ECT-VW-002
• Manufacturer: NTY
• Name: NTY ECT-VW-002

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of mounting bores: 1
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Fitted Diameter [mm]: 9
• Colour Coding: green
• Housing Colour: black
• Connector Shape: D Shape, oval
• General Information: temperature sensor
• Manufacturer: VIKA

• Engine Code: CHZD
• Värvimarkeering: hall
• Pistikkontaktide arv: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Fabrication Number: ECT-AU-003
• Manufacturer: NTY

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 2
• OE-numbri jaoks: 06A919501
• Piirangutega toode/piirangu info 2: koos osadega
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Kaal (g): 15
• Name: IM 5309
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV702

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ühenduste arv: 2
• Värv: must
• Installatsiooni pool: ees
• Kaal (kg): 0,004
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CHZD
• Colour Coding: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Engine Code: CHZD
• Colour Coding: grey
• tootekoodile: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Supplementary Article/Info 2: with clamp holder
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M20
• Number of pins: 2
• Housing Colour: grey
• Connector Shape: oval
• Manufacturer: ERA

• General Information: temperature sensor
• Manufacturer: VIKA

• Anduritüüp: NTC-andur
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Pistikkontaktide arv: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Fabrication Number: ECT-VW-007
• Manufacturer: NTY
• Name: NTY ECT-VW-007

• General Information: external temperature sensor
• Manufacturer: BORSEHUNG

• Number of pins: 2
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for PR number: 9AK, KH6
• Pistikkontaktide arv: 2
• Anduritüüp: NTC-andur
• Pistikukatte kuju: ristkülik, nurga all
• Korpuse materjal: GFK (klaaskiuga tugevdatud plastmass)
• OE-numbri jaoks: 5Q0 907 543A
• Montaaživiis: Stoperdatud
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CHZD
• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Name: SW 30 92 9318
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CHZD
• Colour Coding: grey
• Corresponds to the original part in colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Version: IAM
• Article number of recommended accessories: 0899250, 0905513
• Power [W]: 0.06
• Manufacturer: METZGER

• Quantity: 1
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Number of connectors: 2
• Colour Coding: grey
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Fitting Position: Front
• Number of pins: 2
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: CHZD
• Housing Colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: CHZD
• Housing Colour: black
• Manufacturer: FACET

• Anduritüüp: NTC-andur
• Montaaživiis: Kruviühendus
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 2
• Pistiku värv: must
• OE-numbri jaoks: 03F919501A
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF

• Number of pins: 2
• Colour: black
• Manufacturer: METZGER

• Quantity: 1
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: D Shape
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Läbimõõt [mm]: 26
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Vedrukuju: Kinnitusvedru
• Pikkus (mm): 20
• Korpusevärv: sinine
• Kõrgus (mm): 57
• Värv: hall
• Ühenduste arv: 2
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 03F 919 501 B
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: TRU

• Version: 1
• Pistikukatte kuju: D-kuju
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: 0
• Keermemõõt: 0
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Kuju: gewinkelt
• Kinnitusaukude hulk: 1
• Piirangutega toode/piirangu info 2: koos kruviga, ilma kaablita
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CHZD
• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,011
• OE-numbri jaoks: 03F 919 501 B
• Name: SW 30 10 6571
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECP-AU-039
• Number of pins: 3
• Sensor Type: Active sensor
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: NTY
• Name: NTY ECP-AU-039

• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 9AK, KH6
• Number of pins: 2
• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer Restriction: Am Verdampfer
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: CHZD
• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,011
• OE-numbri jaoks: 03F 919 501 B
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ühenduste arv: 3
• Kaal (kg): 0,023
• Piirangutega toode/piirangu info 2: koos kruviga
• OE-numbri jaoks: 04C 906 433 G
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 2
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6
• OE-numbri jaoks: 03F919501B, 04E919501C

• Pistikkontaktide arv: 3
• Name: DE SS11482
• Manufacturer: DELPHI

• Ühenduste arv: 3
• Kaal (kg): 0,023
• OE-numbri jaoks: 04C 906 433 G
• Piirangutega toode/piirangu info 2: koos kruviga
• Name: SW 33 10 2812
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kruviga
• Pistikkontaktide arv: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Engine Code: CHZD
• Transmission Type: Manual Transmission
• Name: ANDUR,P™™RDED
• Manufacturer: EPS

• Engine Code: CHZD
• Transmission Type: Manual Transmission
• Manufacturer: FACET

• Fabrication Number: ECC-AU-011
• Manufacturer: NTY
• Name: NTY ECC-AU-011

• Engine Code: CHZD, DKRF
• Anduritüüp: NTC-andur
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 2
• Manufacturer: MEYLE

• General Information: impulse sender; crackshaft
• Manufacturer: VIKA

• for PR number: 9AK
• Number of pins: 2
• Vehicle Equipment: for vehicles with automatic climate control
• Manufacturer: METZGER

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Manufacturer: BREMI

• General Information: Transmission speed sensor
• Manufacturer: VIKA

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Connector Shape: oval
• Alternative Repair Kit: 551675
• Manufacturer: ERA

• Keermemõõt: 10
• Manufacturer: FAE ELEKTRYKA

• General Information: impulse sender crankshaft
• Manufacturer: BORSEHUNG

• Pistikkontaktide arv: 2
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Keermemõõt: M 10
• Keerme samm (mm): 1
• Keermepikkus (mm): 11
• põhikeha materjal: Messing
• mõõtepiirkond alates [bar]: 0,48
• Mõõtepiirkond kuni [bar]: 11
• Anduritüüp: Hallsensor
• Värvimarkeering: pruun
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Materjal tihend: Alumiinium
• Võtmekaugus: 24
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: EPO-AU-013
• Manufacturer: NTY

• for PR number: TJ4
• Number of pins: 3
• Pressure from [bar]: 0.48
• Pressure to [bar]: 11
• Fitting Position: Engine Block
• Manufacturer: METZGER

• Manufacturer: VALEO

Vehicle Equipment: for vehicles with air conditioning (manually controlled)

• Voltage [V]: 12
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV393
• Manufacturer: ESEN SKV

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Keermemõõt: M12
• Keerme samm (mm): 1,5
• Keermepikkus (mm): 9
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Materjal tihend: Alumiinium
• Võtmekaugus: 24
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• for OE number: 06E907660C
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• General Information: oil pressure sender
• Manufacturer: BORSEHUNG

• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Cylinder Head Cover
• Number of pins: 3
• Socket colour: black
• Thread Size: M12x1,5
• Manufacturer: METZGER

• Installatsiooni pool: Õlivann
• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Materjal tihend: HNBR (Hydrierter Acryl-Nitril-Butadien-Kautschuk)
• Kinnitusaukude hulk: 3
• Korpusetüüp: Sünteetikakorpus
• Korpuse materjal: PA 66 GF 30, GFK (klaaskiuga tugevdatud plastmass)
• Korpusevärv: must
• jälgida süsteemi mahutavust:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CHZD
• Pikkus, mõõteandur [mm]: 87,5
• Manufacturer: FACET

• Engine Code: CHZD
• Sensor Length [mm]: 87.5
• Manufacturer: EPS