Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: Connector rod to console
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: at the intermediate lever
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: Centre
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- for OE number: 1H0 711 574
- Fitting Position: Front
- Vehicle Equipment: for vehicles with gearshift linkage
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: Rear
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Connector rod to console
- Manufacturer: 3RG
- Vehicle Equipment: for vehicles with gearshift linkage
- Material: Plastic
- Colour: Milk White
- for OE number: 191711590A
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: at the intermediate lever
- Manufacturer: 3RG
- Vehicle Equipment: for vehicles with gearshift linkage
- Quantity per packing unit: 10
- Weight [kg]: 0.003
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 10
-
Fitting Position: at gearshift linkage,
Connector rod to console - Colour: Milk White
- Vehicle Equipment: for vehicles with manual transmission
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 5
-
Fitting Position: at the intermediate lever,
at gearshift linkage - Colour: Ivory White
- Vehicle Equipment: for vehicles with manual transmission
-
Name: Puks,
kigu- / llitusvarras - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Upper,
Lower - Height [mm]: 15.1
- Material: Plastic
- Inner Diameter [mm]: 14.1
- Outer Diameter [mm]: 23.7
- Manufacturer: 3RG
- Length [mm]: 60
-
Name: KIGU-
/ LLITUSKANG - Manufacturer: MAX
- General Information: shift sleeve
- Manufacturer: VIKA
- Vehicle Equipment: for vehicles with gearshift linkage
-
Material: GRP
(Glass fibre Reinforced Plastic) - Housing material: Polyamid 6.6
- Overall Length [mm]: 64.1
- Mounting Type: Clipped
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 4
- Length [mm]: 60
- Weight [kg]: 0.009
- Required quantity: 1
- Weight [g]: 9
- Manufacturer: METALCAUCHO
- Fitting Position: Transverse
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Length [mm]: 22
- Fitting Position: Front
-
Name: KIGU-
/ LLITUSKANG - Manufacturer: MAX
- Quantity per packing unit: 5
- Length [mm]: 60
- Fitting Position: Transverse
- Vehicle Equipment: for vehicles with gearshift linkage
- Weight [kg]: 0.01
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 46
- Manufacturer: 3RG
- Length [mm]: 220
- Fitting Position: Front
- Weight [kg]: 0.066
- for OE number: 1H0 711 574
-
Name: KIGU-
/ LLITUSKANG - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with gearshift linkage
- Quantity per packing unit: 20
- Weight [kg]: 0.008
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles with gearshift linkage
-
Housing material: GRP
(Glass fibre Reinforced Plastic) - Shaft Material: Metal
- Mounting Type: Clipped
- Shaft Form: straight
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 60
- Weight [kg]: 0.01
- Fitting Position: Transverse
-
Name: KIGU-
/ LLITUSKANG - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
-
Fitting Position: Upper,
Lower - Inner Diameter [mm]: 14.1
- Outer Diameter [mm]: 23.7
- Height [mm]: 15.1
- Material: Plastic
- Transmission Type: for manual transmission
- Colour: Milk White
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
- Length [mm]: 220
- Weight [kg]: 0.06
- Required quantity: 1
- Weight [g]: 60
- Manufacturer: METALCAUCHO
-
Fitting Position: Upper,
Lower - Height [mm]: 15.1
- Outer Diameter [mm]: 23.7
- Inner Diameter [mm]: 14.1
- Transmission Type: for manual transmission
- Material: Plastic
-
Name: Remondikomplekt,
kigukang - Manufacturer: MAX
- Fitting Position: Front
- Length [mm]: 220
- Weight [kg]: 0.06
- Required quantity: 1
- Weight [g]: 60
- Manufacturer: METALCAUCHO
- Vehicle Equipment: for vehicles with gearshift linkage
- Material: Plastic
-
Colour: Orange,
black - for OE number: 191711190B
- Manufacturer: DELLO AUTOMEGA
- Vehicle Equipment: for vehicles with gearshift linkage
- Mounting Type: Bushing
- Supplementary Article/Supplementary Info: with Plastic Bushing
-
Name: PUKS,
LLITUSVARRAS - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 4
- Weight [kg]: 0.03
- Weight [g]: 30
- Manufacturer: METALCAUCHO
- Vehicle Equipment: for vehicles with gearshift linkage
- Manufacturer: 3RG
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Height [mm]: 6.5
- Radial Shaft Seal Design: ASW OF
-
Material: HNBR
(hydrogenated nitrile butadiene rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Additional information: 886.780 ELRING
- Lisainfo: 886.780 ELRING
- General Information: bearing ring
- Manufacturer: VIKA
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: at gearshift linkage
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with gearshift linkage
- Mounting Type: Bushing
- Supplementary Article/Supplementary Info: with Plastic Bushing
-
Name: Puks,
llitusvarras - Manufacturer: MAX
Manufacturer: 3RG
- Vehicle Equipment: for vehicles with gearshift linkage
- Manufacturer: JP GROUP
- Lisainfo: Relay shaft for shift mechanism
- Additional information: Relay shaft for shift mechanism
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: at gearshift linkage
-
Name: SIDURIKAHVEL,
SIDUR - Manufacturer: MAX
- Vehicle Equipment: for vehicles with gearshift linkage
- Weight [kg]: 0.27
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks