Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Equipment: for vehicles with power steering
- Diameter [mm]: 10
-
Filter type: In-
Line Filter - Supplementary Article/Info 2: Magnetic
- Manufacturer: JP GROUP
-
Lisainfo: Hydraulic Filter,
steering system -
Additional information: Hydraulic Filter,
steering system
- Vehicle Equipment: for vehicles with power steering
- Diameter [mm]: 12
-
Filter type: In-
Line Filter - Supplementary Article/Info 2: Magnetic
-
Lisainfo: Hydraulic Filter,
steering system -
Additional information: Hydraulic Filter,
steering system
- Transmission ID: 098
-
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer Restriction: VW
- Quantity Unit: Set
- Transmission Code: AG4
- Supplementary Article/Info 2: without fastening material
-
Name: Hdraulikafiltrikomplekt,
automaatkigukast - Manufacturer: MAX
- Filter type: Filter Insert
-
Transmission Code: AG4,
JF404E -
Transmission Type: 4-
Speed Automatic Transmission - Width [mm]: 157
- Height [mm]: 32
- Sealing Ring Diameter [mm]: 34
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: KAMOKA
- Transmission Code: 01M
-
Supplementary Article/Supplementary Info: without gasket/
seal - See accessories list for additionally required parts:
-
Transmission Type: 4-
Speed Automatic Transmission - Filter type: Filter Insert
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: without gasket/
seal - Transmission Code: AG4
- Filter type: Filter Insert
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Filter type: Screen Filter
- Manufacturer: JAPKO
-
Transmission Type: 5-
Speed Automatic Transmission -
Filter type: Screen Filter,
Suction Filter - Housing Type: Synthetic Material Housing
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
-
Filter type: Filter Insert,
with housing cover - Supplementary Article/Info 2: with seal ring
-
Drive Type: All-
wheel Drive - Observe system fill quantity:
- Shape: Cylindrical
- Manufacturer Restriction: HALDEX Gen. I
-
Name: Olifilter,
diferentsiaal - Manufacturer: MAX
- Fitting Position: Rear Axle
-
Filter type: Filter Insert,
with housing cover - Supplementary Article/Info 2: with seal ring
- Shape: Cylindrical
- Manufacturer Restriction: HALDEX Gen. I
- Observe system fill quantity:
- Manufacturer: ENERGY
- Fitting Position: Rear Axle
-
Filter type: Filter Insert,
with housing cover - Supplementary Article/Info 2: with seal ring
- Shape: Cylindrical
- Manufacturer Restriction: HALDEX Gen. I
- Observe system fill quantity:
-
Name: OLIFILTER,
DIFFERENTSIAAL - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission Code: AG4
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 000 277 26 95
- Guarantee: 3 years guarantee
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Filter type: Filter Insert
- Transmission Code: Jatco 09B
-
Transmission Type: 5-
Speed Automatic Transmission - Quality class: PJ
- Name: Automatic transmission filter
-
Transmission Type: 5-
Speed Automatic Transmission - Filter type: Screen Filter
- Length [mm]: 231
- Width [mm]: 108
- Thickness [mm]: 33
- Colour: black
- Material: Plastic
- Weight [kg]: 0.2
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 5-
Speed Automatic Transmission - Filter type: Screen Filter
- Material: Plastic
- for OE number: 09A 325 429 A
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: MAX
- Transmission ID: 098
-
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer Restriction: VW
- Transmission Code: AG4
- Number of mounting bores: 5
-
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Lisainfo: 1003980011
- Additional information: 1003980011
- Filter type: Screen Filter
- Manufacturer: JAPKO
-
Transmission Type: 5-
Speed Automatic Transmission - Filter type: Screen Filter
- Length [mm]: 231
- Width [mm]: 108
- Thickness [mm]: 33
- Colour: black
- Material: Plastic
- Weight [kg]: 0.2
- Observe service information:
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 5-
Speed Automatic Transmission - See accessories list for additionally required parts:
-
Fabrication Number: FSF-
VW- 015 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Transmission Type: 5-
Speed Automatic Transmission - Length [mm]: 231
- Weight [kg]: 0.2
- Filter type: Screen Filter
- Manufacturer: DRIVE
- Transmission ID: EQT
-
Transmission Type: 4-
Speed Automatic Transmission - Transmission Code: AG4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with spacer sleeve
- Seal Material: Rubber
- Alternative Repair Kit: 8020001
- Manufacturer: METZGER
- Filter type: Filter Insert
-
Transmission Code: 01M,
01N, AG4 -
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Filter type: Filter Insert
- Length [mm]: 195.5
- Width [mm]: 158
- Height [mm]: 35.1
- Inner Diameter 2 [mm]: 34
- Transmission Code: AG4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Gasket Design: Soft Material Gasket
- Number of Holes: 5
-
Recommended change interval [km]: 60,
000 - Packaging length [cm]: 19.7
- Packaging height [cm]: 23.3
- Net Weight [g]: 232
- Packaging width [cm]: 4.6
-
Manufacturer: FILTRY KNECHT /
MAHLE - Name: KN HX147KIT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 195.5
- Width [mm]: 158
- Height [mm]: 35.1
- Inner Diameter 2 [mm]: 34
- Transmission Code: AG4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Gasket Design: Soft Material Gasket
- Number of Holes: 5
-
Recommended change interval [km]: 60,
000 - Packaging length [cm]: 19.7
- Packaging height [cm]: 23.3
- Net Weight [g]: 232
- Packaging width [cm]: 4.6
- Manufacturer: MAHLE KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Construction Year from: 01.2001
-
Transmission Type: 5-
Speed Automatic Transmission - Thickness [mm]: 33
- See accessories list for additionally required parts:
- Transmission Code: Jatco 09B
- Filter type: Filter Insert
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 5-
Speed Automatic Transmission - See accessories list for additionally required parts:
- Transmission Code: Jatco 09B
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
- Quality class: PJ
- Name: Automatic transmission filter
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Code: AG4
- Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Supplementary Article/Info 2: with oil sump gasket
- Length [mm]: 196
- Width [mm]: 158
- Height [mm]: 34
- Inner Diameter [mm]: 25
- SVHC: No SVHC present!
- Manufacturer: MANN
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks