• Fitting Position: Front Axle
• Inner Diameter [mm]: 79
• Width [mm]: 13.1
• Outer Diameter [mm]: 83
• Number of Teeth: 48
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 27-0296
• Additional information: 27-0296

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) from: 7M3513711
• Construction Year from: 11.2002
• Sensor Type: Active sensor
• Length [mm]: 479
• Socket colour: black

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) from: 7M3513711
• Construction Year from: 11.2002
• Wear Warning Contact: with integrated wear warning contact
• Sensor Type: Active sensor
• Length [mm]: 479
• Socket colour: black

• Fitting Position: Front Axle both sides
• Width [mm]: 13
• Number of Teeth, ABS ring: 48
• Inner Diameter [mm]: 79
• Outer Diameter [mm]: 82.85
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 79
• Thickness [mm]: 13.1
• Number of Teeth: 48
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides, Wheel Side
• Number of Teeth: 48
• Width [mm]: 12, 13
• Inner Diameter [mm]: 79
• Outer Diameter [mm]: 83
• Fabrication Number: NZA-BM-001
• Manufacturer: NTY
• Name: NTY NZA-BM-001

• Fitting Position: Front Axle
• Inner Diameter [mm]: 79
• Width [mm]: 13.1
• Outer Diameter [mm]: 83
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: FORD, SEAT, VOLKSWAGEN
• Additional information: FORD, SEAT, VOLKSWAGEN

• Engine Code: AYL
• Inner Diameter [mm]: 79
• Outer Diameter [mm]: 83
• Material: Steel
• Number of Teeth, ABS ring: 48
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 0.028
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 490
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 7M3513710
• Construction Year to: 10.2002
• Overall Length [mm]: 550
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 490
• Wear Warning Contact: prepared for wear warning indicator
• paired article number: 30155
• Weight [kg]: 0.08
• Manufacturer: A.B.S.
• Lisainfo: FE30154
• Additional information: FE30154

• Vehicle Identification Number (VIN) to: 7M-3-513710
• Length [mm]: 474
• Sensor Type: Passive sensor
• Wear Warning Contact: prepared for wear warning indicator
• Fitting Position: Front Axle Left
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Identification Number (VIN) from: 7M3513711
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-FR-044
• Manufacturer: NTY

• Construction Year to: 12.2000
• Fitting Position: Front Axle
• Cable Length [mm]: 560
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Model Year to: 2000
• Sensor Type: Passive sensor
• Cable Length [mm]: 475
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-FR-015
• Manufacturer: NTY

• Required quantity: 1
• Fitting Position: Rear Axle
• Construction Year to: 05.2005
• Vehicle Identification Number (VIN) from: 7M-3-513711
• Length [mm]: 1,031
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer: DENCKERMANN HAMULCE

• Fitting Position: Front Axle Left, Front Axle Right
• Number of Teeth, ABS ring: 48
• Inner Diameter [mm]: 79
• Width [mm]: 13
• Manufacturer: METZGER

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-VW-039
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Wear Warning Contact: not prepared for wear warning indicator
• Number of pins: 4
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Cable Length [mm]: 1,320
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Model Year to: 2000
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,075
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Front Axle, Front Axle Left
• Construction Year to: 11.2002
• Wear Warning Contact: prepared for wear warning indicator
• Vehicle Identification Number (VIN) to: 7M-3-513710
• Sensor Type: Passive sensor
• Cable Length [mm]: 530
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX
• Lisainfo: 7M3927807H/MG
• Additional information: 7M3927807H/MG

• Fitting Position: Rear Axle Right
• Vehicle Identification Number (VIN) from: 7M3513711
• Construction Year from: 11.2002
• for PR number: 9U0
• Sensor Type: Active sensor
• Length [mm]: 1,031
• Socket colour: black

• Construction Year from: 01.2003
• Fitting Position: Front Axle
• Cable Length [mm]: 475
• Number of pins: 4
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Wear Warning Contact: not prepared for wear warning indicator
• Vehicle Identification Number (VIN) from: 7M-3-513711
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Length [mm]: 583
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 02.2001
• Construction Year to: 10.2002
• Fitting Position: Rear Axle
• Length [mm]: 1,090
• Plug Type: Female
• Connector Shape: oval
• Voltage [V]: 12
• Weight [kg]: 0.17
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Engine Code: AYL
• Model Year from: 2001, 2003
• Fitting Position: Front Axle Left, Front Axle Right
• Model Year to: 2002
• Block Separation:
• Vehicle Identification Number (VIN) to: 7M-3-513 710
• Sensor Type: Inductive Sensor
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Rear Axle Left, Rear Axle
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 28.2
• Fabrication Number: HCA-FR-012
• paired article number: HCA-FR-013
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 490
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Wear Warning Contact: not prepared for wear warning indicator
• Fitting Position: Front Axle both sides
• General Information: ABS speed sensor; front
• Manufacturer: VIKA

• Construction Year from: 11.2002
• Wear Warning Contact: prepared for wear warning indicator
• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Cable Length [mm]: 505
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Rear Axle, Rear Axle Right
• Construction Year from: 11.2002
• Wear Warning Contact: prepared for wear warning indicator
• Vehicle Identification Number (VIN) from: 7M-3-513711
• Sensor Type: Active sensor
• Cable Length [mm]: 1,113
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Cable Length [mm]: 1,110
• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) from: 7M-3-513 711
• Fitting Position: Rear Axle both sides
• Cable Length [mm]: 1,110
• Number of connectors: 2, 4
• Manufacturer: JPN

• Cable Length [mm]: 1,090
• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Rear Axle
• Construction Year to: 11.2002
• Vehicle Identification Number (VIN) to: 7M-3-513710
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,310
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Wear Warning Contact: prepared for wear warning indicator
• Vehicle Identification Number (VIN) from: 7M-3-513711
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Length [mm]: 560
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 7M-3-513 711
• Fitting Position: Rear Axle both sides
• Cable Length [mm]: 1,090
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Front Axle both sides
• Cable Length [mm]: 490
• Number of connectors: 2
• Manufacturer: JPN

• Vehicle Identification Number (VIN) from: 7M-3-513711
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,090
• Name: CZUJNIK ABS VW T. SHARAN 95- LE/PR
• Manufacturer: MAX

• Fitting Position: Front Axle
• Thickness [mm]: 13
• Inner Diameter [mm]: 79
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: MEY

• Construction Year from: 01.2003
• Fitting Position: Rear Axle
• Cable Length [mm]: 1,270
• Number of pins: 4
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 05.2005
• Fitting Position: Rear Axle
• Cable Length [mm]: 1,035
• Number of pins: 4
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle, Front Axle Left
• paired article number: GH-702514H
• Manufacturer: AUTO-GH

• Length [mm]: 1,026
• Fitting Position: Rear Axle Left
• General Information: ABS speed sensor; rear left
• Manufacturer: VIKA

• Length [mm]: 474
• Fitting Position: Front Axle
• General Information: ABS speed sensor; front
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Wear Warning Contact: prepared for wear warning indicator
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 7M-3-513711
• Fitting Position: Front Axle
• Guarantee: 5 years guarantee
• Manufacturer: HUCO
• Name: HU 131408

• Construction Year from: 02.2001
• Construction Year to: 10.2002
• Fitting Position: Rear Axle
• Length [mm]: 1,090
• Plug Type: Female
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.17
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV112

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) to: 7M-3-513710
• Supplementary Article/Info 2: with cable
• Length [mm]: 560
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Model Year from: 2003, 2009
• Vehicle Identification Number (VIN) from: 7M-3-513 711
• Required quantity: 2, 1
• Block Separation:
• Sensor Type: Active sensor
• Cable Length [mm]: 480
• Wear Warning Contact: prepared for wear warning indicator
• Vehicle Equipment: for vehicles with brake pad wear indicator
• Number of pins: 2, 4
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Construction Year to: 10.2002
• Fitting Position: Front Axle
• Length [mm]: 470
• Plug Type: Female
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.12
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV114

• Length [mm]: 1,026
• Fitting Position: Rear Axle Right
• General Information: ABS speed sensor; rear right
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 7M3513710
• Wear Warning Contact: with integrated wear warning contact
• Required quantity: 2
• Construction Year to: 10.2002
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle both sides
• Cable Length [mm]: 504
• Number of connectors: 2, 4
• Manufacturer: JPN

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 7M3513711
• Construction Year from: 11.2002
• Overall Length [mm]: 540
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 479
• paired article number: 30402
• Weight [kg]: 0.09
• Manufacturer: A.B.S.

• Fitting Position: Front
• General Information: ABS speed sensor; front
• Manufacturer: VIKA

• Construction Year from: 10.2002
• Vehicle Identification Number (VIN) from: 7M-3-513 711
• Fitting Position: Front Axle
• Cable Length [m]: 0.47
• Wear Warning Contact: not prepared for wear warning indicator
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Engine Code: AYL
• Model Year from: 2001
• Vehicle Identification Number (VIN) to: 7M-3-030 000
• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 1,280
• Wear Warning Contact: prepared for wear warning indicator
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Construction Year from: 11.2002
• Fitting Position: Front Axle
• Length [mm]: 500
• Number of pins: 2
• Plug Type: Female
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.09
• Operating Mode: Electric
• Socket colour: black
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV275

• Construction Year to: 10.2002
• Fitting Position: Left, Right
• Required quantity: 2
• Vehicle Identification Number (VIN) to: 7M_3_513710
• Cable Length [mm]: 450
• Sensor Type: Inductive Sensor
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Andur, rattap””rete arv
• Manufacturer: HEL

Wear Warning Contact: with integrated wear warning contact, prepared for wear warning indicator Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AYL
• Model Year from: 2001
• Vehicle Identification Number (VIN) to: 7M-3-513710
• Length [mm]: 474
• Braking/Driving Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Fitting Position: Front Axle Left
• Resistor [Ohm]: 1,100
• Colour: black
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 7M3513711
• Construction Year from: 11.2002
• Overall Length [mm]: 540
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 479
• Wear Warning Contact: prepared for wear warning indicator
• paired article number: 30401
• Weight [kg]: 0.11
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• Vehicle Identification Number (VIN) from: 7M3513711
• for PR number: 9U0
• Construction Year from: 11.2002
• Overall Length [mm]: 1,145
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 1,075
• paired article number: 30316
• Weight [kg]: 0.18
• Manufacturer: A.B.S.

• Engine Code: AYL
• Model Year from: 2001
• Fitting Position: Front Axle
• Model Year to: 2002
• Sensor Type: Passive sensor
• Cable Length [mm]: 485
• Wear Warning Contact: prepared for wear warning indicator
• Number of pins: 4
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Construction Year from: 11.2002
• Construction Year to: 05.2005
• Fitting Position: Rear Axle
• Length [mm]: 1,230
• Plug Type: Female
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.17
• Operating Mode: Electric
• Socket colour: black
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV335

• Construction Year to: 10.2002
• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Equipment: for vehicles with airbag
• Vehicle Identification Number (VIN) to: 7M_3_513710
• Cable Length [mm]: 1,330, 1,155
• Fitting Depth [mm]: 28.2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle
• Construction Year from: 11.2002
• Wear Warning Contact: not prepared for wear warning indicator
• Vehicle Identification Number (VIN) from: 7M-3-513 711
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 570
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 490
• Weight [kg]: 0.052
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 05.2005
• Vehicle Identification Number (VIN) from: 7M-3-513 711
• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Cable Length [mm]: 1,107
• Wear Warning Contact: not prepared for wear warning indicator
• Number of pins: 4
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Vehicle Identification Number (VIN) from: 7M-3-513711
• Cable Length [mm]: 479
• Sensor Type: Hall Sensor
• Wear Warning Contact: prepared for wear warning indicator
• Fitting Position: Front Axle Right, Front Axle Left
• for OE number: 7M3927807N
• Manufacturer: MEAT&DORIA

• for PR number: 9U0
• Vehicle Identification Number (VIN) from: 7M3513711
• Required quantity: 2
• Construction Year from: 11.2002
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle
• Construction Year from: 11.2002
• Wear Warning Contact: prepared for wear warning indicator
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 505
• Manufacturer: DELPHI
• Name: DE SS20387
• Quality class: PJ

• Construction Year from: 11.2002
• Fitting Position: Rear Axle Right
• Required quantity: 2
• for PR number: 9U0
• Vehicle Identification Number (VIN) from: 7M_3_513711
• Cable Length [mm]: 1,105
• Fitting Depth [mm]: 27.9
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 490
• Weight [kg]: 0.052
• Name: SW 33 10 1316
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 7M-3-513711
• Wear Warning Contact: not prepared for wear warning indicator
• Cable Length [mm]: 530
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Manufacturer: FAE

• Fitting Position: Rear Axle
• General Information: ABS speed sensor; rear
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: ******7M*3*513711
• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,090
• Weight [kg]: 0.1
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 9U1
• Vehicle Identification Number (VIN) from: 7M3513711
• Wear Warning Contact: with integrated wear warning contact
• Required quantity: 2
• Construction Year from: 11.2002
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle
• Construction Year from: 11.2002
• Wear Warning Contact: not prepared for wear warning indicator
• Vehicle Identification Number (VIN) from: 7M-3-513 711
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,140
• Manufacturer: DELPHI
• Name: DE SS20495

• Fitting Position: Front Axle Left
• Construction Year to: 11.2002
• Wear Warning Contact: prepared for wear warning indicator
• Vehicle Identification Number (VIN) to: 7M-3-513 710
• Sensor Type: Passive sensor
• Number of occupied pins: 6
• Cable Length [mm]: 530
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ