• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 72
• Inner Diameter [mm]: 40
• Width [mm]: 37
• Lisainfo: Wheel bearing, front
• Additional information: Wheel bearing, front

• Vehicle Identification Number (VIN) to: 6K-X-290000
• Fitting Position: Front Axle both sides, inner
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing, front, inner
• Additional information: Wheel bearing, front, inner

• Name: Wheel bearing kit
• Quality class: PJ

Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 79.5
• Supplementary Article/Info 2: for wheel bearing/wheel hub
• Width [mm]: 21
• Weight [kg]: 0.039
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: with wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-VW-000
• Manufacturer: NTY
• Name: NTY KLT-VW-000

• Fitting Position: Rear Axle
• Construction Year to: 05.1999
• Vehicle Identification Number (VIN) to: 6K-X-290000
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 15
• Width 2 [mm]: 15
• Outer Diameter 2 [mm]: 40
• Weight [kg]: 0.3
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Construction Year to: 05.1999
• Vehicle Identification Number (VIN) to: 6K-X-290000
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Vehicle Identification Number (VIN) to: 6K-X-290000
• Fitting Position: Rear Axle
• Construction Year to: 05.1999
• Diameter [mm]: 65
• Width [mm]: 14.6, 14.7
• Height [mm]: 39
• Inner Diameter [mm]: 17.5, 29
• Outer Diameter [mm]: 39.9, 50
• Width 2 [mm]: 14.2, 13.8
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Width [mm]: 15
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 50
• Bearing Type: Roller Bearing
• Supplementary Article/Info 2: with seal ring
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 05.1999
• Vehicle Identification Number (VIN) to: 6K-X-290000
• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• for OE number: 191 598 625
• Inner Diameter [mm]: 17.5
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 14.605
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 39.878
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 17.462
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 6K-X-290000
• Width [mm]: 14.7
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 39.9
• Width 1 [mm]: 13.8
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: FRRE LR+RE
• Inner Diameter [mm]: 29
• Inner Diameter 2 [mm]: 17
• Width 1 [mm]: 14
• Width 2 [mm]: 39
• Number of mounting bores: 1
• Name: DA KWD1019
• Manufacturer: DAYCO

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.234
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Info 2: with shaft seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Construction Year to: 05.1999
• Vehicle Identification Number (VIN) to: 6K-X-290000
• Width [mm]: 13.8
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 39.9
• Width 1 [mm]: 14.2
• Supplementary Article/Info 2: with fastening material
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Manufacturer: OPTIMAL

• Supplementary Article/Info 2: for wheel bearing/wheel hub
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: METZGER

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.234
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Info 2: with shaft seal
• Name: SW 30 85 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 6K-X-290000
• Construction Year to: 05.1999
• Fitting Position: Rear Axle
• Width [mm]: 14.73
• Inner Diameter [mm]: 17.46
• Outer Diameter 1 [mm]: 50.29
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) to: 6K-X-290000
• Weight [kg]: 0.26
• Packaging length [cm]: 11
• Packaging width [cm]: 9
• Packaging height [cm]: 6
• Outer Diameter [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Width [mm]: 13.9
• Width 2 [mm]: 14.2
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 6K-X-290000
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 17.5
• Outer Diameter 1 [mm]: 39.9
• Width 1 [mm]: 14.6
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610230

• Supplementary Article/Info 2: with grease cap, with seal ring
• Outer Diameter 1 [mm]: 50
• Inner Diameter 1 [mm]: 29
• Outer Diameter 2 [mm]: 40
• Inner Diameter 2 [mm]: 19
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 72
• Inner Diameter [mm]: 40
• Width [mm]: 37
• Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Info 2: with wheel hub
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-000
• Manufacturer: NTY
• Name: NTY KLP-VW-000

• Fitting Position: Front Axle
• for OE number: 357498625B, 191498625A, 357498625
• Width [mm]: 37
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Height [mm]: 37
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 72
• Inner Diameter 1 [mm]: 40
• Manufacturer: GSP

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Supplementary Article/Info 2: with retaining ring, with nut
• Manufacturer: OPTIMAL

• Width [mm]: 37
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.682
• Supplementary Article/Supplementary Info: with fastening/mounting material
• for OE number: 357 498 625 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 72
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle both sides
• Weight [kg]: 0.551
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Supplementary Article/Info 2: with wheel hub
• Packaging length [cm]: 7.2
• Packaging width [cm]: 7.2
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 40
• Outer Diameter 1 [mm]: 72
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Supplementary Article/Info 2: with retaining ring, with screw, with nut
• Manufacturer: OPTIMAL

• Width [mm]: 37
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.682
• Supplementary Article/Supplementary Info: with fastening/mounting material
• for OE number: 357 498 625 C
• Name: SW 30 90 3662
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Diameter [mm]: 72
• Width [mm]: 37
• Weight [kg]: 0.64
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Weight [g]: 670
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 40
• Outer Diameter 1 [mm]: 72
• Weight [kg]: 0.72
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Construction Year to: 05.1999
• Vehicle Identification Number (VIN) to: 6K-X-290000
• Fitting Position: Rear Axle
• Required quantity: 2
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Manufacturer: SKF
• Name: SK VKBA529

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.96
• Bolt Hole Circle Ø 1 [mm]: 100
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Width [mm]: 37
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610100

• Fitting Position: Front Axle
• Weight [kg]: 0.782
• Packaging length [cm]: 11
• Packaging width [cm]: 11
• Packaging height [cm]: 7.3
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 72
• Inner Diameter [mm]: 40
• Width [mm]: 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Construction Year from: 03.1999
• Vehicle Identification Number (VIN) from: 6K-X-290001
• Flange Diameter [mm]: 120
• Supplementary Article/Info 2: with ABS sensor ring
• Rim Hole Number: 4
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Version: One
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Inner Diameter 2 [mm]: 28
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 6K-X-290001
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-VW-010
• Manufacturer: NTY

• Quantity: 2
• Fitting Position: Front
• General Information: wheel bearing with assembly parts; front
• Manufacturer: VIKA

• Construction Year from: 03.1999
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 1.8
• Number of Holes: 4
• Bolt Hole Circle Ø 1 [mm]: 100
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV012

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 120
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Vehicle Identification Number (VIN) from: 6K-X-290001
• Fitting Position: Rear Axle
• Construction Year from: 03.1999
• Width [mm]: 63.6
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 28
• Outer Diameter 2 [mm]: 120
• Number of mounting bores: 4
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle
• Construction Year from: 03.1999
• Vehicle Identification Number (VIN) from: 6K-X-290001
• Rim Hole Number: 4
• Flange Diameter [mm]: 120
• Supplementary Article/Info 2: with ABS sensor ring
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Inner Diameter 2 [mm]: 28
• Manufacturer: GSP

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 72
• Manufacturer: SKF
• Name: SK VKBA1358

• Vehicle Identification Number (VIN) from: ******6K*X*290001
• Width [mm]: 65
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.55
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Number of Holes: 4
• Weight [kg]: 2.428
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Bolt Hole Circle Ø [mm]: 100
• Width [mm]: 65
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 6K-X-290001
• Width [mm]: 61.8
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Manufacturer: OPTIMAL

• Construction Year from: 03.1999
• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 6K-X-290001
• Weight [kg]: 1.762
• Packaging length [cm]: 13.7
• Packaging width [cm]: 13.1
• Packaging height [cm]: 7.3
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 120
• Rim Hole Number: 4
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Construction Year from: 03.1999
• Vehicle Identification Number (VIN) from: 6K-X-290001
• Fitting Position: Rear Axle
• Required quantity: 2
• Flange Diameter [mm]: 120
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: SKF
• Name: SK VKBA3548

• Construction Year to: 04.1999
• Fitting Position: Rear Axle
• Required quantity: 2
• Brake Type: Drum Brake
• Braking/Drive Dynamics: for vehicles with ABS
• Diameter [mm]: 240
• Width [mm]: 81
• Inner Diameter [mm]: 200
• Number of Holes: 4
• Supplementary Article/Info 2: with integrated wheel bearing
• Manufacturer: SKF NAPINACZE POMPY
• Quantity per packing unit: 2