Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Stabiliser Diameter [mm]: 18
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 17
- Length from [mm]: 33
- Material: Rubber
Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 19
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 10
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle
- Inner Diameter [mm]: 19
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Quantity per packing unit: 10
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Weight [kg]: 0.04
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Length [mm]: 33
- Inner Diameter [mm]: 17
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Vehicle Identification Number (VIN) to: 6K-
V- 143 400 -
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 17
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Quantity: 4
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle
- Weight [kg]: 0.015
- General Information: rubber bush
- Manufacturer: VIKA
- Stabiliser Diameter [mm]: 18
- Length [mm]: 33
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.026
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 0.025
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 18
- Length [mm]: 28
- Fitting Position: Front Axle
- Required quantity: 2
- Manufacturer: TEDGUM
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 6K-
V- 143401 - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19
- SVHC: No SVHC present!
- Manufacturer: FAG
- Length [mm]: 28
-
Fitting Position: inner,
Front Axle - Mounting Type: Rubber Mount
- Required quantity: 2
- Inner Diameter [mm]: 17
- Weight [kg]: 0.03
- Manufacturer: TEDGUM_TD
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP ZAWIESZENIE
-
Stabiliser Diameter [mm]: 20,
22 - Block Separation:
- Inner Diameter [mm]: 19
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.026
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 17
- paired article number: VKDS 351006
- Manufacturer: SKF
-
Fitting Position: Front,
outer, Left, Right - Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 19
- Thickness 1 [mm]: 32.5
- Manufacturer: DELPHI
-
Fitting Position: Front,
Left, Right - Diameter [mm]: 17
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 17
- Outer Diameter 1 [mm]: 35
- Thickness 1 [mm]: 32
- Manufacturer: DELPHI
- Fitting Position: Front Axle both sides
- Required quantity: 2
- paired article number: VKDS 351022
- Height [mm]: 36
- Inner Diameter [mm]: 19
- Manufacturer: SKF ZAWIESZENIE
- Fitting Position: Axle beam
- General Information: Rubber bush
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle both sides
- Mounting Type: Rubber Mount
- Weight [kg]: 0.03
- Inner Diameter [mm]: 17.5
- Length [mm]: 28
- Manufacturer: RTS
- Mounting Type: Rubber Mount
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.014
- Inner Diameter [mm]: 11
- Length [mm]: 15
- Manufacturer: RTS
- Length [mm]: 48
- Width [mm]: 30
- Thickness [mm]: 30
- Inner Diameter [mm]: 16.2
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.037
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks