Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- for PR number: 1ZA
- Fitting Position: Front Axle
- Length [mm]: 170
- Number of wear indicators [per axle]: 1
- Manufacturer: JP GROUP
- Colour Coding: grey
- Number of pins: 2
-
Lisainfo: Sender for water temperature gauge,
2 pins -
Additional information: Sender for water temperature gauge,
2 pins
- Engine Code: CZEA
- Number of pins: 2
- Connector Shape: D Shape
- Manufacturer: JP GROUP
- Lisainfo: Coolant Temperature Sensor
- Additional information: Coolant Temperature Sensor
- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- Sensor Type: NTC Sensor
- Mounting Type: Clipped
- Component Number: G17
-
Name: Andur,
vlistemperatuur - Manufacturer: HAN
Housing material: Plastic, GRP (Glass fibre Reinforced Plastic), Polyamid 6.6 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle Right
- Sensor Type: Hall Sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
-
Braking/Drive Dynamics: for vehicles with ABS,
for vehicles with ESP - Manufacturer: JP GROUP
-
Lisainfo: ABS sensor,
front, right -
Additional information: ABS sensor,
front, right
- Weight [kg]: 0.013
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 2
- Connector Shape: D Shape
- Consult accessories list for recommended additional repairs:
-
Name: NIVOOLLITI,
PESUVEEKOGUS - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Depth [mm]: 29
- Housing Colour: black
- Manufacturer: KAMOKA
- Weight [kg]: 0.015
- Number of connectors: 2
- Screw length below head [mm]: 20
- Colour: grey
- Colour Coding: grey
- General Information: temperature sensor; grey; 2 pins
- Manufacturer: VIKA
- Weight [kg]: 0.015
- Number of connectors: 2
- Screw length below head [mm]: 20
- Colour: black
- Colour Coding: grey
- General Information: temperature sensor; black
- Manufacturer: VIKA
-
Connector Shape: oval,
D Shape - Colour Coding: grey
- Sensor Type: NTC Sensor
- Number of pins: 2
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
-
Fabrication Number: ECT-
VW- 002 - Manufacturer: NTY
-
Name: NTY ECT-
VW- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: outer
-
Name: Andur,
vlistemperatuur - Manufacturer: MAX
- General Information: temperature sensor
- Manufacturer: VIKA
-
Fabrication Number: ECT-
AU- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 2
- for OE number: 06A919501
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Fitting Position: Front Axle Right
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Sensor Type: Active sensor
-
paired article number: hca-
vw- 021 -
Fabrication Number: HCA-
VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of mounting bores: 1
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Fitted Diameter [mm]: 9
- Colour Coding: green
- Housing Colour: black
-
Connector Shape: D Shape,
oval - General Information: temperature sensor
- Manufacturer: VIKA
- Weight [g]: 15
- Name: IM 5309
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle Left
- Sensor Type: Active sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
-
paired article number: hca-
vw- 022 -
Fabrication Number: HCA-
VW- 021 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV702
-
Fitting Position: Front Axle Left,
Rear Axle Left - Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 2
-
paired article number: hca-
vw- 029 -
Fabrication Number: HCA-
VW- 028 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of connectors: 2
- Colour: black
- Fitting Position: Front
- Weight [kg]: 0.004
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CZEA
- Colour Coding: grey
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- Engine Code: CZEA
- Colour Coding: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Thread Size: M20
- Number of pins: 2
- Housing Colour: grey
- Connector Shape: oval
- Manufacturer: ERA
- General Information: temperature sensor
- Manufacturer: VIKA
-
Fitting Position: Front Axle Right,
Rear Axle Right - Number of pins: 2
- Supplementary Article/Info 2: without cable
-
paired article number: hca-
vw- 028 -
Fabrication Number: HCA-
VW- 029 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Left
- Supplementary Article/Info 2: without cable
- Manufacturer: DENCKERMANN FILTRY
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
-
Fabrication Number: ECT-
VW- 007 - Manufacturer: NTY
-
Name: NTY ECT-
VW- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 2
- Plug Type: Blade Terminal
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle Left
- Sensor Type: Hall Sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
-
Braking/Drive Dynamics: for vehicles with ABS,
for vehicles with ESP - Manufacturer: JP GROUP
-
Lisainfo: ABS sensor,
front, left -
Additional information: ABS sensor,
front, left
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: black,
grey - Fitting Depth [mm]: 20
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead -
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- General Information: external temperature sensor
- Manufacturer: BORSEHUNG
-
for PR number: 9AK,
KH6 - Number of pins: 2
- Sensor Type: NTC Sensor
-
Connector Shape: rectangular,
angled -
Housing material: GRP
(Glass fibre Reinforced Plastic) - for OE number: 5Q0 907 543A
- Mounting Type: Clipped
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 1
- Sensor Type: Active sensor
- Fitting Position: Front Axle Left
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
- Quantity: 1
- Sensor Type: Active sensor
- Fitting Position: Front Axle Right
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
- Colour: black
- Number of pins: 2
- Name: DETONATSIOONIANDUR
- Manufacturer: MAX
- Supplementary Article/Info 2: without cable
- Socket colour: black
-
Fabrication Number: ESS-
VW- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Right
- Sensor Type: Hall Sensor
- paired article number: 150041510
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle Left
- Sensor Type: Hall Sensor
- paired article number: 150042310
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle Left
- Number of connectors: 2
- Manufacturer: JPN
- Colour: black
-
Fitting Position: Centre,
Front, both sides, Rear, inner -
Fabrication Number: EPDC-
BM- 005 - Manufacturer: NTY
-
Name: NTY EPDC-
BM- 005
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Right
- Number of connectors: 2
- Manufacturer: JPN
- Fitting Position: Front Axle Right
- Sensor Type: Active sensor
- Manufacturer: KAVO PARTS
- Fitting Position: Front Axle Left
- Sensor Type: Active sensor
- Manufacturer: KAVO PARTS
-
Fitting Position: Front Axle,
Front Axle Left -
paired article number: GH-
709921H -
Manufacturer: AUTO-
GH
-
Fitting Position: Front Axle,
Front Axle Right -
paired article number: GH-
709921V -
Manufacturer: AUTO-
GH
- Length [mm]: 24
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of pins: 3
-
Fabrication Number: ECP-
AU- 029 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Required quantity: 1
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: without cable
- Colour: black
-
Name: CZUJNIK ABS VW P. POLO/
FABIA/ IBIZA/ CORDOBA 99- PR - Manufacturer: BRM
- Required quantity: 1
- Fitting Position: Front Axle Left
- Supplementary Article/Info 2: without cable
- Colour: black
-
Name: CZUJNIK ABS VW P. POLO/
FABIA/ IBIZA/ CORDOBA 99- LE - Manufacturer: BRM
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
- Number of connectors: 2
- Colour Coding: grey
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG
- Fitting Position: Right Rear
- General Information: ABS speed sensor; rear right
- Manufacturer: VIKA
- Fitting Position: Left Rear
- General Information: ABS speed sensor; rear left
- Manufacturer: VIKA
- Weight [kg]: 0.1
- Number of connectors: 2
- Required quantity: 1
- Fitting Position: Front Axle Right
- General Information: ABS speed sensor; front right
- Manufacturer: VIKA
- Engine Code: CZEA
- Housing Colour: black
- Manufacturer: FACET
- Engine Code: CZEA
- Housing Colour: black
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: without cable
- Manufacturer: DENCKERMANN FILTRY
- Sensor Type: NTC Sensor
- Mounting Type: Screw Connection
- Connector Shape: D Shape
- Number of pins: 2
- Socket colour: black
- for OE number: 03F919501A
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
- Weight [kg]: 0.48
- Number of connectors: 2
- Colour: black
- General Information: knock sensor
- Manufacturer: VIKA
- Fitting Position: Rear Axle Left
- Sensor Type: Hall Sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
-
Lisainfo: ABS sensor,
front/ rear, left -
Additional information: ABS sensor,
front/ rear, left
- Fitting Position: Rear Axle Right
- Sensor Type: Active sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Manufacturer: JP GROUP
-
Lisainfo: ABS sensor,
front/ rear, right -
Additional information: ABS sensor,
front/ rear, right
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Version: 1
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Fitting Position: Rear Axle Right
- Supplementary Article/Info 2: without cable
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Rear Axle Left
- Supplementary Article/Info 2: without cable
- Manufacturer: DENCKERMANN FILTRY
- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- for OE number: 1205185
- Manufacturer: MEAT&DORIA
- Production date to: 28.11.2021
- Fitting Position: Front Axle Right
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Length [mm]: 61
- Braking/Drive Dynamics: for vehicles with ABS
- paired article number: 110 609
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Production date to: 28.11.2021
- Fitting Position: Front Axle Left
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Length [mm]: 61
- Braking/Drive Dynamics: for vehicles with ABS
- paired article number: 110 608
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Connector Shape: D Shape
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG
-
Fitting Position: Rear Axle,
Rear Axle Right, Front Axle Right - Quantity: 1
- Sensor Type: Active sensor
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
-
Fitting Position: Rear Axle,
Rear Axle Left, Front Axle Left - Quantity: 1
- Sensor Type: Active sensor
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
- General Information: pressure sensor
- Manufacturer: VIKA
- Fitting Position: Front Axle Left
- Number of pins: 2
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 21
- Manufacturer: AUTOFREN SEINSA
- Name: SE DS0004
-
Fitting Position: Rear Axle Left,
Rear Axle - Supplementary Article/Info 2: without cable
- Manufacturer: DELLO AUTOMEGA
- for OE number: 03F 919 501 B
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: TRU
- Fitting Position: Front Axle Right
- Number of pins: 2
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 21
- for OE number: 6Q0927804B
- Manufacturer: AUTOFREN SEINSA
- Name: SE DS0003
- Fitting Position: Right
- Required quantity: 1
- Sensor Type: Active sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU012679941
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- Fitting Position: Front Axle Left
- paired article number: 100 899 0052
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Sensor Type: Active sensor
-
Braking/Drive Dynamics: for vehicles with ESP,
for vehicles with ABS - Supplementary Article/Info 2: without cable
- Number of pins: 2
- Fitting Position: Front Axle Right
- paired article number: 100 899 0053
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Number of pins: 4
- Supplementary Article/Info 2: with integrated air temperature sensor
- Pressure from [kPA]: 20
- Pressure to [kPA]: 310
- Quality: OE EQUIVALENT
- for OE number: 1728
- Manufacturer: MEAT&DORIA
- Fitting Position: Rear
- General Information: ABS speed sensor; rear
- Manufacturer: VIKA
- Quantity: 1
- Number of pins: 3
- Fitting Depth [mm]: 24
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MAX
- Fitting Position: Left
- Required quantity: 1
- Sensor Type: Active sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU012679931
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Thread Size: 9 mm.
- Number of pins: 2
- Housing Colour: black
- Manufacturer: FAE ELEKTRYKA
- Number of pins: 3
- Connector Shape: D Shape
- Shape: angled
- Number of mounting bores: 1
-
Supplementary Article/Info 2: with screw,
without cable - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Colour: black
- Number of pins: 2
- Weight [kg]: 0.058
- Manufacturer: ERA
- Fitting Position: Rear
- General Information: ABS speed sensor; rear
- Manufacturer: BORSEHUNG
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.011
- for OE number: 03F 919 501 B
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle Left
- Overall Length [mm]: 66
- Length [mm]: 28
- Sensor Type: Active sensor
- Socket colour: grey
- paired article number: 30146
- Weight [kg]: 0.09
- Manufacturer: A.B.S.
- General Information: camshaft position sensor
- Manufacturer: BORSEHUNG
- Construction Year to: 09.2020
- Voltage [V]: 12
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV014
Fitting Position: Left, Longitudinal, Right, inner, outer, Front, Rear
-
Fitting Position: Front Axle,
Rear Axle, Left, Right - Number of pins: 2
- Socket Width [mm]: 1.5
- Plug Type: Female
- Number of circuits: 2
-
Material: CuSn
(copper- tin) - Cable Length [mm]: 500
- Cable cross-section from [mm²]: 0.75
- Cable cross-section to [mm²]: 0.75
- Cable insulation material: Silicone
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Manufacturer: METZGER
-
Fitting Position: Left,
Right - Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Name: Sensor,
parkimisabi - Manufacturer: MAG
-
Fabrication Number: ECP-
AU- 039 - Number of pins: 3
- Sensor Type: Active sensor
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Manufacturer: NTY
-
Name: NTY ECP-
AU- 039
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Quantity: 1
- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE SS11473
- Construction Year to: 12.2020
- Number of pins: 4
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MAX
-
Lisainfo: 21-
0216 -
Additional information: 21-
0216
- Number of pins: 4
- Manufacturer: JPN
- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.011
- for OE number: 03F 919 501 B
- Name: SW 30 10 6571
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 23814
- Number of connectors: 2
- Fitting Position: Front Axle Right
- Weight [kg]: 0.011
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Weight [kg]: 0.02
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for PR number: 9AK,
KH6 - Number of pins: 2
- Vehicle Equipment: for vehicles with air conditioning
- Manufacturer Restriction: Am Verdampfer
- Power [W]: 0.06
- Manufacturer: METZGER
- Required quantity: 1
- Fitting Position: Rear Axle Right
- Supplementary Article/Info 2: without cable
- Colour: grey
- Manufacturer: BRM
Name: CZUJNIK ABS VW T. TOUAREG 02- /Q7 06- /CAYENNE 02- PR
- Required quantity: 1
- Fitting Position: Rear Axle Left
- Supplementary Article/Info 2: without cable
- Colour: grey
- Manufacturer: BRM
Name: CZUJNIK ABS VW T. TOUAREG 02- /Q7 06- /CAYENNE 02- LE
-
Fitting Position: outer,
Rear, Front - Sensor Type: Ultrasonic Sensor
- Colour: black
- Shape: angled
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of connectors: 3
- Quality class: PJ
- Name: Parking sensor
- Engine Code: CZEA
- Fitting Position: Front Axle Right
- Required quantity: 1
- Sensor Length [mm]: 21
- Manufacturer: FACET
- Engine Code: CZEA
- Fitting Position: Front Axle Right
- Required quantity: 1
- Sensor Length [mm]: 21
- Name: EP 1.960.010
- Manufacturer: EPS
- Fitting Position: Left
- General Information: ABS speed sensor; left
- Manufacturer: VIKA
- Fitting Position: Front Axle Right
- Overall Length [mm]: 62
- Length [mm]: 21
- Sensor Type: Active sensor
- Socket colour: black
- paired article number: 30013
- Weight [kg]: 0.1
- Manufacturer: A.B.S.
- Fitting Position: Front Axle Left
- Overall Length [mm]: 62
- Length [mm]: 21
- Sensor Type: Active sensor
- Socket colour: black
- paired article number: 30014
- Weight [kg]: 0.1
- Manufacturer: A.B.S.
- Fitting Position: Rear
- General Information: ABS speed sensor; rear
- Manufacturer: VIKA
- paired article number: 23816
- Number of connectors: 2
- Fitting Position: Front Axle Left
- Weight [kg]: 0.011
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Left Rear
- General Information: ABS speed sensor; left; rear
- Manufacturer: BORSEHUNG
- Engine Code: CZEA
- Fitting Position: Front Axle Left
- Required quantity: 1
- Sensor Length [mm]: 21
- Manufacturer: FACET
- Engine Code: CZEA
- Fitting Position: Front Axle Left
- Required quantity: 1
- Sensor Length [mm]: 21
- Name: EP 1.960.011
- Manufacturer: EPS
- Length [mm]: 66
- Sensor Type: Active sensor
- paired article number: FT80423
-
Fitting Position: Rear Axle Right,
Front Axle Right - Manufacturer: FAST
- Fitting Position: Right Rear
- General Information: ABS speed sensor; right; rear
- Manufacturer: BORSEHUNG
- Construction Year to: 09.2020
- Voltage [V]: 12
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV071
Fitting Position: Left, Longitudinal, Right, inner, outer, Front, Rear
- Construction Year to: 11.2019
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: FAE ELEKTRYKA
-
Fitting Position: Left,
Front Axle Left - Required quantity: 1
- Voltage [V]: 12
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU010039991
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Connector Shape: D Shape
- Number of pins: 4
- Sensor Type: NTC Sensor
-
Housing material: GRP
(Glass fibre Reinforced Plastic), PBT - Manufacturer: TOPRAN
Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of connectors: 3
- Weight [kg]: 0.023
- for OE number: 04C 906 433 G
- Supplementary Article/Info 2: with screw
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 66
- Sensor Type: Active sensor
- paired article number: FT80424
-
Fitting Position: Rear Axle Right,
Front Axle Right - Manufacturer: FAST
- for PR number: 0N4
- Fitting Position: Front Axle Right
- Length [mm]: 28
- Weight [kg]: 0.024
- Packaging length [cm]: 6.6
- Packaging width [cm]: 3.5
- Packaging height [cm]: 1.9
- Manufacturer: FEBEST
- Fitting Position: Rear Axle Right
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Length [mm]: 66
- Braking/Drive Dynamics: for vehicles with ABS
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CZEA
- Required quantity: 1
- Housing Colour: black
- Manufacturer: FACET
- paired article number: 32 92 3814
- Number of connectors: 2
- Fitting Position: Front Axle Right
- Weight [kg]: 0.011
- Name: SW 32 92 3816
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
-
for OE number: 03F919501B,
04E919501C
- Fitting Position: Rear
- General Information: ABS speed sensor; rear
- Manufacturer: BORSEHUNG
-
for PR number: TK8,
TL1 - Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Number of pins: 3
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MEY
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with screw
- Number of pins: 3
-
Name: Andur,
vntvoll - Manufacturer: MEY
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU009168401
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 2
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Front,
Rear - Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV096
- Number of pins: 3
- Name: DE SS11482
- Manufacturer: DELPHI
- Required quantity: 1
-
Name: CZUJNIK CIN. POWIETRZA VW GOLF 1,
9TDI 00- - Manufacturer: BRM
- Number of connectors: 3
- Weight [kg]: 0.023
- for OE number: 04C 906 433 G
- Supplementary Article/Info 2: with screw
- Name: SW 33 10 2812
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Measuring Range from [kPa]: 11
- Measuring Range to [kPa]: 307
- Measuring Range from [V]: 0.25
- Measuring Range to [V]: 4.75
- Number of connectors: 4
- Manufacturer: VERNET
- Fitting Position: Front Axle Right
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Quality class: PJ
- Fitting Position: Front Axle Left
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- paired article number: 32 92 3816
- Number of connectors: 2
- Fitting Position: Front Axle Left
- Weight [kg]: 0.011
- Name: SW 32 92 3814
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Right
- Required quantity: 1
- Fitting Depth [mm]: 21.1
- Number of pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Sensor Type: Hall Sensor
- Manufacturer: FAE ELEKTRYKA
- Number of pins: 3
- Sensor Type: Hall Sensor
-
Supplementary Article/Info 2: with seal ring,
without cable - Connector Shape: oval
-
for OE number: 04C 907 601K,
958 907 601 00 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle Right
- Number of pins: 2
- Sensor Type: Active sensor
- Fitting Depth [mm]: 28
- Supplementary Article/Info 2: without cable
- Manufacturer: AUTOFREN SEINSA
- Name: SE DS0035
- General Information: hall sender camshaft
- Manufacturer: VIKA
- Number of pins: 3
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU009168741
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year to: 12.2020
- Manufacturer: BOSCH
- Name: BS 0261230388
- Number of pins: 4
- Supplementary Article/Info 2: with integrated air temperature sensor
- Quality: OE EQUIVALENT
- for OE number: 03G906051E
- Manufacturer: MEAT&DORIA
- Number of pins: 2
- Manufacturer: DELPHI
- Name: DE AS10169
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 2
- Tightening Torque [Nm]: 20
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Plug Type: Blade Terminal
- Connector Shape: oval
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PG013114301
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Fitting Position: outer,
Front, inner, Rear - Block Separation:
- Colour Code: GRU
- Colour: black
- Surface: primed
- Number of pins: 3
- Chemical Properties: Paintable
- Sensor Type: Ultrasonic Sensor
-
Supplementary Article/Supplementary Info: with gasket/
seal - Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle Left
- Required quantity: 1
- Fitting Depth [mm]: 21
- Number of pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Engine Code: CZEA
- Required quantity: 1
- Name: EP 1.953.793
- Manufacturer: EPS
-
Fitting Position: Right,
Front Axle Right - Required quantity: 1
- Voltage [V]: 12
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU012039001
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.48
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.2020
- Name: DETONATSIOONIANDUR
- Manufacturer: BOS
- Number of pins: 3
- Sensor Type: Hall Sensor
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
- Fitting Position: Rear Axle Left
- Construction Year to: 11.2019
- Sensor Type: Active sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Connector Shape: D Shape
- Manufacturer: FAE
- General Information: impulse sender; crackshaft
- Manufacturer: VIKA
- for PR number: 9AK
- Number of pins: 2
- Vehicle Equipment: for vehicles with automatic climate control
- Manufacturer: METZGER
- for PR number: TK8
- Sensor Type: Hall Sensor
- Alternatively:
- Number of pins: 3
- Connector Shape: oval
- Alternative Repair Kit: 551675
- Manufacturer: ERA
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: grey
- Manufacturer: BREMI
- Fitting Position: Rear Axle Right
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Observe technical data:
- Manufacturer Restriction: VAG
- Number of pins: 2
- Cable Length [mm]: 500
- Cable Cross Section [mm²]: 0.75
- Socket Width [mm]: 1.5
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: +125
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
tagatuli - Manufacturer: HBE
- General Information: hall sender camshaft
- Manufacturer: VIKA
- General Information: pressure sensor
- Manufacturer: BORSEHUNG
- Sensor Type: Hall Sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Fitting Position: Front Axle Right
- Manufacturer: FAE
- Fitting Position: Rear Axle Right
- Overall Length [mm]: 66
- Length [mm]: 28
- Sensor Type: Active sensor
- Socket colour: grey
- paired article number: 30145
- Weight [kg]: 0.09
- Manufacturer: A.B.S.
- Engine Code: CZEA
- Required quantity: 1
- Pressure from [kPA]: 11
- Pressure to [kPA]: 307
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.75
- Manufacturer: FACET
-
Fitting Position: Front,
Lateral Mounting - for PR number: 7X5
- Colour Code: GRU
- Surface: primed
- Number of pins: 3
- Chemical Properties: Paintable
- for OE number: 5Q0 919 297B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
Vehicle Equipment: for vehicles with full-autom. park assist (parallel parking) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CZEA
- Required quantity: 1
- Pressure from [kPA]: 11
- Pressure to [kPA]: 307
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.75
-
Name: ANDUR,
HEITGAASISURVE - Manufacturer: EPS
- Fitting Position: Right
- Length [mm]: 28
- Weight [kg]: 0.01
- Socket colour: black
- Colour: black
- Material: Plastic
- Sensor Type: Active sensor
- Number of pins: 2
- Manufacturer: METALCAUCHO
- Fitting Position: Rear Axle Left
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Construction Year to: 12.2020
-
Name: ANDUR,
KOMPRESSORIROHK - Manufacturer: BOS
-
Fitting Position: Left,
Rear Axle, Front Axle - Cable Length [mm]: 66
- Name: SN ASB157.01
-
Manufacturer: NTN-
SNR
-
Axle: Four-
Link Axle - Fitting Position: Rear Axle Right
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- paired article number: 114 800 0021
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
-
Axle: Four-
Link Axle - Fitting Position: Rear Axle Left
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- paired article number: 114 800 0022
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
-
Fitting Position: Rear,
Front - Diameter [mm]: 15.5
- Colour: black
- Shape: angled
- Sensor Type: Ultrasonic Sensor
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 3
- Chemical Properties: Paintable
- Housing Colour: black
- Manufacturer: ERA
-
Fitting Position: Rear,
Front, inner -
for PR number: 7X1,
7X5 - Block Separation:
-
Chemical Properties: Over-
paintable - Colour: black
- Number of pins: 3
- Shape: angled
- Sensor Type: Ultrasonic Sensor
-
Name: Sensor,
parkimisabi - Manufacturer: MEY
-
Fitting Position: outer,
Left, Right, Front - Required quantity: 2
-
Name: Sensor,
parkimisabi - Manufacturer: TRI
- Engine Code: CZEA
- Fitting Position: Rear Axle Right
- Required quantity: 1
- Sensor Length [mm]: 27.5
- Manufacturer: FACET
- Engine Code: CZEA
- Fitting Position: Rear Axle Left
- Required quantity: 1
- Sensor Length [mm]: 27.5
- Manufacturer: FACET
- Quantity: 1
- Number of pins: 4
-
Name: DE PS20073-
12B1 - Manufacturer: DELPHI
- Engine Code: CZEA
- Fitting Position: Rear Axle Right
- Required quantity: 1
- Sensor Length [mm]: 27.5
- Name: EP 1.960.173
- Manufacturer: EPS
- Engine Code: CZEA
- Fitting Position: Rear Axle Left
- Required quantity: 1
- Sensor Length [mm]: 27.5
- Name: EP 1.960.172
- Manufacturer: EPS
- Production date to: 28.11.2021
- for OE number: WHT 003 861
- Fitting Position: Front Axle Left
- Manufacturer: PIERBURG
- Production date to: 28.11.2021
- Fitting Position: Front Axle Right
- Manufacturer: PIERBURG
- Number of pins: 4
- Pressure from [kPA]: 20
- Pressure to [kPA]: 300
- Manufacturer: VDO
- Engine Code: CZEA
- Number of pins: 2
- Colour: black
- Name: Detonatsiooniandur
- Manufacturer: VDO
- Construction Year to: 12.2020
-
Fitting Position: Fuel Line
(high pressure side) - Fuel Mixture Formation: Direct Injection
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.05
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV050
- Manufacturer: ESEN SKV
- Construction Year to: 12.2020
- Fitting Position: Front Axle Right
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Overall Length [mm]: 61
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
- Manufacturer: BOSCH
- Number of pins: 4
- Pressure from [kPA]: 20
- Pressure to [kPA]: 300
- Manufacturer: FAE
- Construction Year to: 12.2020
- Supplementary Article/Info 2: High Pressure Side
- Fuel Mixture Formation: Direct Injection
-
Name: CZUJNIK CIN. POWIETRZA AUDI A1 1.4TFSI 14-
- Manufacturer: MAX
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Cable Length [mm]: 970
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Conductor Number: 4
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV126
- Required quantity: 4
-
Fitting Position: both sides,
inner, Front, Rear - Number of pins: 3
- Chemical Properties: Paintable
- Mounting Type: mounting
- Socket colour: black
- Assy./disassy. by qualified personnel required!:
- Sensor Type: Ultrasonic Sensor
- Name: HE 6PX358270431
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Exhaust System: after catalytic converter
- Oxygen Sensor: Finger probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 800
- Number of pins: 4
- Guarantee: 3 years guarantee
- Weight [kg]: 0.13
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV127
- Quantity: 1
- Number of pins: 4
- Pressure from [kPA]: 13
- Manufacturer: DELPHI
- Name: DE PS10161
- Fitting Position: Front Axle Left
- Supplementary Article/Info 2: without cable
- MAPP code available:
- Manufacturer: ATE
-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Rated Voltage [V]: 12
- Number of pins: 4
- Connector Shape: D Shape
- Cable Length [mm]: 837
- Overall Length [mm]: 870
- Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Thread Length [mm]: 9
-
Supplementary Article/Info 2: with cable,
with heat shield pipe - Lubrication: with grease lubrication
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Pressure to [bar]: 280
- Number of pins: 3
- Manufacturer: FAE ELEKTRYKA
- Fitting Position: Rear Axle Right
- Production date to: 24.11.2019
- Manufacturer: PIERBURG
- Construction Year to: 12.2020
- Fitting Position: Front Axle Left
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Overall Length [mm]: 61
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: BOS
- Engine Code: CZEA
- Number of pins: 4
- Manufacturer: MEYLE
- Fitting Position: Front Axle Right
- Construction Year to: 11.2021
- Sensor Type: Active sensor
- Supplementary Article/Supplementary Info: with accessories
- Length [mm]: 62
- paired article number: GBS2513
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle Left
- Construction Year to: 11.2021
- Sensor Type: Active sensor
- Supplementary Article/Supplementary Info: with accessories
- Length [mm]: 62
- paired article number: GBS2514
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front,
outer -
Manufacturer Restriction: Renault,
VAG - Cable Length [mm]: 175
- Number of pins: 3
- Cable Cross Section [mm²]: 0.75
-
Contact surface: Silver-
plated - Plug Type ID: Code B
-
Supplementary Article/Supplementary Info: with socket housing,
with gasket/ seal - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
-
Name: Kaabliparanduskomplekt,
olisurvelliti - Manufacturer: HBE
- General Information: pressure sensor
- Manufacturer: VIKA
- Sensor Type: Ultrasonic Sensor
-
Fitting Position: inner,
outer, Rear - Chemical Properties: Paintable
- Manufacturer: FAE ELEKTRYKA
-
Fitting Position: outer,
inner, both sides, Front, Rear - Construction Year to: 09.2020
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Chemical Properties: Paintable
- Manufacturer: FAE ELEKTRYKA
- Number of pins: 4
- Supplementary Article/Info 2: with integrated air temperature sensor
- for OE number: 1209552
- Manufacturer: MEAT&DORIA
- Required quantity: 1
- Mounting Type: Bolted
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA ELEKTRYKA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
Manufacturer: NRF
- Fitting Position: Rear Axle Left
- Supplementary Article/Info 2: without cable
- MAPP code available:
- Manufacturer: ATE
- Construction Year to: 11.2019
- Fitting Position: Rear Axle Right
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Overall Length [mm]: 66
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: BOS
- Number of connectors: 3
- Weight [kg]: 0.041
- for OE number: 06J 906 051 F
-
Name: Andur,
ktuserohk - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 11.2019
- Fitting Position: Rear Axle Left
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Overall Length [mm]: 66
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
- Manufacturer: BOSCH
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 2
- Tightening Torque [Nm]: 20
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Plug Type: Blade Terminal
- Connector Shape: oval
- Quantity: 1
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PG009108561
- Manufacturer: HELLA
SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year to: 09.2020
- Manufacturer: VALEO
- Oxygen Sensor: Finger probe
- Fitting Position: Front
- General Information: lambda probe; front
- Manufacturer: VIKA
- General Information: pressure sensor
- Manufacturer: BORSEHUNG
- General Information: pressure sensor
- Manufacturer: BORSEHUNG
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Quantity: 1
-
Cable Length [mm]: 1,
060 -
Name: SONDA LAMBDA A3,
Q2, Q3 11- - Manufacturer: DLP
- Manufacturer Restriction: VAG
- Plug Type ID: Code A
- Cable Length [mm]: 175
- Number of pins: 3
- Cable Cross Section [mm²]: 0.75
-
Contact surface: Silver-
plated - Cable insulation material: Silicone
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
heitgaasi rohuandur - Manufacturer: HBE
- Production date from: 29.11.2021
- Fitting Position: Front Axle Right
- paired article number: 09001550
- Fitting Depth [mm]: 21.1
- Manufacturer: METZGER
- Production date from: 29.11.2021
- Fitting Position: Front Axle Left
- paired article number: 09001551
- Fitting Depth [mm]: 21.1
- Manufacturer: METZGER
- General Information: pressure sensor
- Manufacturer: BORSEHUNG
- for combined PR number: 8N4+9AK
- Housing Type: Synthetic Material Housing
- Number of pins: 3
- Diameter [mm]: 34
- Length [mm]: 69
- Width [mm]: 46
- Height [mm]: 13
- Connector Shape: angular
- Glass: with humidity sensor
- Supplementary Article/Info 2: with adhesive film
- Manufacturer Restriction: VALEO
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front,
Rear - Sensor Type: Ultrasonic Sensor
- Surface: primed
- Number of pins: 3
- Manufacturer: AIC
Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: CZEA
- Fitting Position: after catalytic converter
- Required quantity: 1
- Cable Length [mm]: 800
- Conductor Number: 4
- Available as universal article as well, see article no.: 10.7007
- Number of circuits: 4
- Manufacturer: FACET
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
- Engine Code: CZEA
- Fitting Position: after catalytic converter
- Required quantity: 1
- Cable Length [mm]: 800
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: LAMBDA ANDUR
- Manufacturer: EPS
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
- Oxygen Sensor: Finger probe
- Fitting Position: Front
- General Information: lambda probe; front
- Manufacturer: VIKA
-
for combined PR number: 8N6+9AC,
8N6+KH6 - Housing Type: Synthetic Material Housing
- Number of pins: 3
- Diameter [mm]: 34
- Length [mm]: 70
- Width [mm]: 48
- Height [mm]: 16
- Connector Shape: angular
- Glass: with rain sensor
- Supplementary Article/Info 2: with adhesive film
- Manufacturer Restriction: TRW
- Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Fitting Position: before catalytic converter
- Quantity: 1
- Cable Length [mm]: 570
-
Name: DE ES21089-
12B1 - Manufacturer: DELPHI
- Voltage [V]: 12
- Vehicle Equipment: for vehicles with air conditioning
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Guarantee: 3 years guarantee
- Weight [kg]: 0.12
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV928
- Manufacturer: ESEN SKV
- Engine Code: CZEA
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 650
- Conductor Number: 4
- Available as universal article as well, see article no.: 10.7007
- Number of circuits: 4
- Manufacturer: FACET
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased
-
Oxygen Sensor: Diagnostic Probe,
Broadband oxygen sensor, Heated - Fitting Position: after catalytic converter
- Quantity: 1
- Cable Length [mm]: 540
-
Name: DE ES21056-
12B1 - Manufacturer: DELPHI
- Engine Code: CZEA
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 650
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: LAMBDA ANDUR
- Manufacturer: EPS
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased
- General Information: rain and humidity sensor
- Manufacturer: BORSEHUNG
- Required quantity: 1
- Measuring Range from [kPa]: 20
- Measuring Range to [kPa]: 115
- Measuring Range from [V]: 0.4
- Measuring Range to [V]: 4.65
- Number of connectors: 4
- Manufacturer: VERNET
- Engine Code: CZEA
- Sensor Length [mm]: 87.4
- Manufacturer: FACET
- Engine Code: CZEA
- Sensor Length [mm]: 87.4
- Name: EP 1.800.227
- Manufacturer: EPS
- Model Year to: 2017
- for combined PR number: 7L6+8N6+9AK
- Housing Type: Synthetic Material Housing
- Number of pins: 3
- Diameter [mm]: 36
- Length [mm]: 69
- Width [mm]: 44
- Height [mm]: 16
- Connector Shape: angular
-
Glass: with rain sensor,
with humidity sensor - Supplementary Article/Info 2: with adhesive film
- Manufacturer Restriction: TRW
- Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Required quantity: 4,
6 -
Fitting Position: inner,
both sides, Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 32
- Width [mm]: 23
- Height [mm]: 35.9
- Number of pins: 3
- Diameter [mm]: 15.5
-
Name: SENSOR,
PARKIMISABI - Manufacturer: VAL
- Supplementary Article/Supplementary Info: with holder
- Glass: with rain sensor
- Shape: round
- Manufacturer Restriction: TRW
- Number of pins: 3
- Supplementary Article/Info 2: with adhesive film
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 2
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 23
- Height [mm]: 28.7
- Number of pins: 3
- Diameter [mm]: 15.5
- Manufacturer: VALEO
Fitting Position: outer, both sides, Front, Rear, lateral installation
- Oxygen Sensor: Oxygen Sensor
- Fitting Position: Front
- General Information: lambda probe; front
- Manufacturer: VIKA
- Oxygen Sensor: Diagnostic Probe
- Number of pins: 4
- Cable Length [mm]: 970
- Quality: OE EQUIVALENT
- for OE number: 04E906262BA
- Manufacturer: MEAT&DORIA
- Number of pins: 3
- Connector Shape: D Shape
- Number of mounting bores: 3
- for OE number: 04E907660C
-
Name: Andur,
Mootoriolitase - Manufacturer: MD
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 3
- Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
MOOTORIOLITASE - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- General Information: air mass meter
- Manufacturer: VIKA
- General Information: air mass meter
- Manufacturer: BORSEHUNG
- Vehicle Equipment: for vehicles with automatic climate control
- Mounting Type: Bayonet
- Number of pins: 3
-
Corresponds to the original part in colour: black/
grey - Assy./disassy. by qualified personnel required!:
-
Name: Andur,
ohukvaliteet - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Glass: with rain/
light sensor, without a moisture sensor - Manufacturer Restriction: TRW
-
Article number of recommended accessories: 8U0 907 671 Klammer,
7N0 955 609 Gel - Number of pins: 3
- Installation Information: Must be coded after installation if necessary.
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for combined PR number: 9AK+7L6+8N6
- Supplementary Article/Supplementary Info: with holder
-
Glass: with humidity sensor,
with rain sensor - Manufacturer Restriction: TRW
- Shape: round
- Number of pins: 3
- Supplementary Article/Info 2: with adhesive film
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Production date from: 29.11.2021
- Number of pins: 7
- for OE number: 2Q0907561J
- Always compare old and new part (in particular OE No.):
-
Supplementary Article/Info 2: Control Unit/
Software must be trained/ updated - Observe the vehicle manufacturer specifications:
- Assy./disassy. by qualified personnel required!:
- Manufacturer: METZGER
- Required quantity: 1
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks