• Fitting Position: Front Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A3 SPORTBACK (8PA),
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A3 SPORTBACK (8PA),
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• General Information: spring support; down
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• General Information: Spring support; front spring disc
• Manufacturer: BORSEHUNG

• for PR number: 0BD, 0BE, 0N4, 1X1
• Weight [kg]: 0.127
• Packaging length [cm]: 10.1
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.6
• Manufacturer: FEBEST

• for PR number: 0N4, 1X1
• Weight [kg]: 0.23
• Packaging length [cm]: 12.8
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST
• Lisainfo: 2398-007-KIT FEBEST
• Additional information: 2398-007-KIT FEBEST

• Weight [kg]: 0.107
• Packaging length [cm]: 9.2
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Lower, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Bolt Head-/Nut Design: Male Hex
• Strength class: 10.9
• Surface: Zink flake coated
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Strength class: 10.9
• Axle: Independent wheel suspension
• Supplementary Article/Info 2: with nut, with protect screen
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Bolt Head-/Nut Design: Male Hex
• Surface: Zink flake coated
• Strength class: 10.9
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.24
• Name: Montaa§ikomplekt, roolissteem
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-033
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-034
• Manufacturer: NTY

• Fitting Position: Front Axle
• Lisainfo: Top Strut Mounting
• Additional information: Top Strut Mounting

• for PR number: 0N4, 1X1
• Weight [kg]: 0.141
• Packaging length [cm]: 10.7
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Width [mm]: 127
• Thickness [mm]: 40
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.31
• Manufacturer: FEB
• Lisainfo: 44799 FEBI
• Additional information: 44799 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• for OE number: 5Q0511357Q
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [g]: 227
• Component Number: 2
• Name: IM 50341
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 5Q0511357F
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [g]: 229
• Component Number: 2
• Name: IM 51039
• Manufacturer: ORIGINAL IMPERIUM

• Construction Year to: 06.2022
• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!BEZ O½YSKA!!!

• Fitting Position: Front Axle
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Height [mm]: 40
• Bearing Type: Rolling Bearing
• Name: Laager - K„„ndmik VW P. AUDI, SKODA
• Manufacturer: MEY
• Lisainfo: 1006410020
• Additional information: 1006410020

• Fitting Position: Rear Axle
• Material: Aluminium
• Mounting Type: Rubber-Metal Mount
• Thickness [mm]: 60
• Weight [kg]: 0.34
• Required quantity: 2
• Inner Diameter [mm]: 10
• General Information: shock absorber bearing; upper
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Name: Vedruamordi tugilaager
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Alternative Repair Kit: 118 038
• Quantity per axle: 2
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.392
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 06.2022
• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 94 0171

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.2022
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 37574 01
• Manufacturer: LMI

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- BEZ O½YSKA

• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 127
• Inner Diameter [mm]: 78
• Name: Laager,amorditugilaager
• Manufacturer: MAX

• Construction Year to: 12.2017
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Name: COC 49495777
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 06.2022
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 803 024
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Weight [kg]: 0.33
• Packaging length [cm]: 12.7
• Packaging width [cm]: 12.7
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Name: Laager,amorditugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Axle: Multi-link Axle
• for PR number: UC7
• Length [mm]: 133
• Material: PU (Polyurethane), Thermoplast
• Fitting Position: Rear Axle
• Weight [kg]: 0.392
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB
• Additional information: FE175365
• Lisainfo: FE175365

Suspension: for vehicles with lifted suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [g]: 812
• Supplementary Article/Info 2: without bearing
• Component Number: 2
• Name: IM 37649
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Left, Front Axle Right
• for PR number: G01, G02
• for OE number: 1K0 412 303 M, 6N0 413 175 A, 6Q0 412 301
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA
• Lisainfo: 900 104
• Additional information: 900 104

SVHC: No information available, please contact the manufacturer!

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 60
• for OE number: 5Q0513353G
• Manufacturer: SASIC

• Fitting Position: Right, Left, Rear Axle, Front Axle
• Manufacturer: SNR
• Name: SN KB954.08

• Axle Version: 4-link rear axle
• for PR number: UC7
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 814018310
• Manufacturer: FAG

• Inner Diameter [mm]: 14
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: suspension strut storage; front
• Manufacturer: BORSEHUNG

• Axle Version: 4-link rear axle
• for PR number: UC7
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Manufacturer: LMI

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW T. LEON/GOLF VII/SPORTSVAN/OCTAVIA 12- LE/PR

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1K0 412 303 B, 5Q0 413 175 C
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

for PR number: G01, G02, G03, L01, L02, L03, L04, L05, L06, L07, L08, L09, L10 SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with electronic suspension control
• for PR number: G03
• Fitting Position: Front Axle
• Weight [kg]: 0.376
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• for PR number: UC7
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Inner Diameter [mm]: 78
• Thickness [mm]: 40
• Outer Diameter [mm]: 127
• Width [mm]: 127
• Weight [kg]: 0.31
• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: deep groove ball thrust bearing; front
• Manufacturer: BORSEHUNG

• Supplementary Article/Info 2: without ball bearing
• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Required quantity: 2
• Inner Diameter [mm]: 14
• General Information: suspension strut storage; front
• Manufacturer: VIKA

• for OE number: 5Q0412249C
• Fitting Position: Front Axle
• Weight [g]: 1,120
• Supplementary Article/Info 2: with ball bearing
• Component Number: 2
• Bearing manufacturer: IMPERGOM
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: IMP

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Quantity: 2
• Quantity Unit: Kit
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Left, Front Axle Right
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB657.27

• Suspension: for vehicles with electronic suspension control
• Fitting Position: Rear Axle
• Name: Vedruamordi tugilaager
• Manufacturer: BIL

• Fitting Position: Front Axle both sides
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Replace in pairs only:
• for components see parts list:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: MEY

Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• General Information: repair kit for suspension strut storage; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Supplementary Article/Info 2: with rolling bearing
• Number of Parts [parts]: 2
• Manufacturer: METZGER