• Vehicle Identification Number (VIN) to: 1M-1-035 000
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 14
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

Lisainfo: "Tootja: TEKNOROT
VW GOLF4/OCTAVIA/ A3
(kvaliteediklass: PJ)"

• Diameter 4 [mm]: 23
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 23
• Length from [mm]: 26
• Name: Stabilizer mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) to: 1M-4-136 650
• for PR number: 0AQ
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 19

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 21
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Required quantity: 2
• Diameter [mm]: 21
• Lisainfo: AUDI A3
• Additional information: AUDI A3

• Production date from: 04/99
• Fitting Position: Front Axle
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 29
• Length 1 [mm]: 22.5
• Length 2 [mm]: 18
• for OE number: 1J0411327
• Manufacturer: SASIC

• Production date from: 04/99
• Quantity per packing unit: 2
• Fitting Position: Front Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Diameter [mm]: 21
• Inner Diameter [mm]: 19.5
• Length [mm]: 25
• Width [mm]: 37
• Height [mm]: 40
• for OE number: 1J0411314R
• Manufacturer: SASIC

• Fitting Position: Front Axle, inner
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 21
• Stabiliser Diameter [mm]: 23
• SVHC: No SVHC present!
• Name: Kinnitus,stabilisaator
• Manufacturer: FAG

• Stabiliser Diameter [mm]: 20.7, 21
• Vehicle Identification Number (VIN) to: 1M-1-035000
• Block Separation:
• Quantity per packing unit: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 21
• Replace in pairs only:
• new version:
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Stabiliser Diameter [mm]: 23
• Quantity per packing unit: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber Mount
• Replace in pairs only:
• Quantity per axle: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Diameter [mm]: 23
• Manufacturer: OYODO

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 25
• Width [mm]: 37
• Height [mm]: 36
• Inner Diameter [mm]: 21
• Manufacturer: 3RG

• Stabiliser Diameter [mm]: 21
• for PR number: 0AL
• Fitting Position: Front Axle
• Inner Diameter [mm]: 18
• Manufacturer: OYODO

• Production date from: 04/99
• Quantity per packing unit: 2
• Fitting Position: Front Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Diameter [mm]: 23
• Inner Diameter [mm]: 21.5
• Length [mm]: 25
• Width [mm]: 37
• Height [mm]: 40
• for OE number: 1J0411314T
• Manufacturer: SASIC

• Fitting Position: Front Axle, Left, Right
• Diameter [mm]: 21
• Required quantity: 2
• Manufacturer: OYODO

• Stabiliser Diameter [mm]: 20.7, 21
• Vehicle Identification Number (VIN) to: 1M-1-035000
• Block Separation:
• Quantity per packing unit: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 21
• Replace in pairs only:
• Shape: slotted
• old version:
• for OE number: 1J0 411 314C
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Weight [kg]: 0.02
• Inner Diameter [mm]: 21
• Mounting Type: Rubber Mount
• Weight [g]: 20
• Manufacturer: METALCAUCHO

• Quantity per packing unit: 4
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 22
• Weight [kg]: 0.085
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Construction Year from: 10.2000
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 37
• Length [mm]: 19
• paired article number: 270726
• Weight [kg]: 0.02
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Stabiliser Diameter [mm]: 23
• Vehicle Identification Number (VIN) from: 1M-X-010001
• Vehicle Identification Number (VIN) to: 1M-1-035000
• Material: Rubber/Metal
• Inner Diameter [mm]: 10
• Mounting Type: Rubber Mount
• Required quantity: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.047
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Weight [kg]: 0.022
• Inner Diameter [mm]: 20, 21
• Mounting Type: Rubber Mount
• Weight [g]: 22
• Manufacturer: METALCAUCHO

• Stabiliser Diameter [mm]: 21
• for PR number: 0AL
• Inner Diameter [mm]: 19
• Observe service information:
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: MAX

• Mounting Type: Rubber Mount
• Fitting Position: Front Axle, inner
• Weight [kg]: 0.02
• Inner Diameter [mm]: 20
• Required quantity: 2
• Length [mm]: 25
• Name: Kinnitus,stabilisaator
• Manufacturer: TED

• Fitting Position: Front Axle, Front Axle both sides
• Quantity: 2
• Vehicle Identification Number (VIN) to: 1M-4-136 650
• Weight [kg]: 0.06
• Material: Rubber with fabric lining, Rubber
• Required quantity: 2
• Inner Diameter [mm]: 19
• General Information: rubber bush; 19MM
• Manufacturer: VIKA

• Stabiliser Diameter [mm]: 21
• for PR number: 0AL
• new version:
• Inner Diameter [mm]: 18
• Fitting Position: Front Axle
• Weight [kg]: 0.026
• Observe service information:
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 2
• Fitting Position: Front Axle both sides
• Material: Sheet Steel
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Front
• Quantity: 2
• Weight [kg]: 0.05
• Required quantity: 2
• General Information: clamp
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 1M-X-010 001
• Inner Diameter [mm]: 10
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

Fitting Position: Front Axle both sides, Front Axle Left, Front Axle Right

• Construction Year to: 07.2004
• Fitting Position: both sides, Front
• Quality: OE Performance
• Material: Rubber
• Colour: black
• Weight [g]: 24
• Inner Diameter [mm]: 21
• Manufacturer: GATES

• Vehicle Identification Number (VIN) to: 1M-1-035 000
• Fitting Position: Right, Left, Front Axle
• Diameter [mm]: 19
• Weight [kg]: 0.02
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right, Front Axle Left
• Material: Metal
• Manufacturer: 3RG

• Fitting Position: Front Axle, Front Axle both sides
• Quantity: 2
• Weight [kg]: 0.06
• Material: Rubber
• Required quantity: 2
• Inner Diameter [mm]: 21
• General Information: rubber bush; 21MM
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Inner Diameter [mm]: 21
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1J0 411 314 S
• Manufacturer: GSP

• Length [mm]: 48
• Width [mm]: 30
• Thickness [mm]: 40
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 48
• Material: Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.034
• Name: Kinnitus,stabilisaator
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 5
• Fitting Position: Front Axle, Centre
• Weight [kg]: 0.075
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 21
• Required quantity: 2
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW 21MM LE/PR
• Manufacturer: MEY

• for PR number: 0AE
• Fitting Position: Front Axle both sides
• Name: KINNITUS,STABILISAATORIPAIGUTUS
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: 1M-4-136 650
• for PR number: 0AQ
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 19
• Quantity Unit: Piece
• Required quantity: 2
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW 19MM
• Manufacturer: MEY

• Production date from: 01/02
• Production date to: 09/04
• Fitting Position: Rear Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Diameter [mm]: 21.7
• Inner Diameter [mm]: 20.2
• Length [mm]: 30
• Width [mm]: 48
• Height [mm]: 41
• for OE number: 1J0511423
• Manufacturer: SASIC

• Fitting Position: Front, Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 21
• Mounting Type: Rubber Mount
• Name: Stabilizer mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"

• Fitting Position: Axle beam
• General Information: Rubber bush
• Manufacturer: BORSEHUNG

• Stabiliser Diameter [mm]: 21.7
• Quantity per packing unit: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber Mount
• Replace in pairs only:
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Inner Diameter [mm]: 21
• Net weight [kg]: 0.05
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: NK

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Stabilizer mount left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"

• Fitting Position: Front
• Manufacturer: KAMOKA

• Fitting Position: Front Axle both sides, Lower
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 21
• Length [mm]: 24.6
• Weight [kg]: 0.024
• Manufacturer: RTS

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 39
• Length [mm]: 37
• Name: ALT 83245PAAL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 39
• Length [mm]: 37
• Name: ALT 83244PAAL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle both sides
• Mounting Type: Rubber Mount
• Weight [kg]: 0.024
• Inner Diameter [mm]: 19
• Length [mm]: 24.8
• Manufacturer: RTS

• Fitting Position: inner, Rear Axle
• Stabiliser Diameter [mm]: 21.7
• Required quantity: 2
• Weight [kg]: 0.04
• Manufacturer: TEDGUM_TD

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 11
• Length [mm]: 30
• Required quantity: 2
• Mounting Type: Rubber Mount
• Name: ALT 93444AL
• Manufacturer: ALTE AUTOMOTIVE

• Vehicle Identification Number (VIN) to: 1M-4-136 650
• Fitting Position: Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 351004
• Height [mm]: 37
• Inner Diameter [mm]: 19
• Manufacturer: SKF
• Name: SK VKDS351004

• Fitting Position: Front Axle
• Manufacturer: GSP

• Fitting Position: Front, Left, Right
• Diameter [mm]: 23
• Quantity per packing unit: 2
• Inner Diameter 1 [mm]: 21
• Thickness 1 [mm]: 25
• Manufacturer: DELPHI
• Name: DE TD561W

• Stabiliser Diameter [mm]: 18
• Length [mm]: 48
• Width [mm]: 30
• Thickness [mm]: 30
• Inner Diameter [mm]: 16.2
• Material: Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.037
• Name: Kinnitus,stabilisaator
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front
• Quantity: 2
• Vehicle Identification Number (VIN) to: 1M-4-136 650
• Weight [kg]: 0.05
• Required quantity: 2
• General Information: rubber bush with clamp
• Manufacturer: VIKA

• for PR number: 0AE
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.05
• Observe service information:
• Name: KINNITUS,STABILISAATORIPAIGUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Diameter [mm]: 21
• Weight [kg]: 0.1
• Required quantity: 2
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Rear Axle Left, Rear Axle Right, inner
• Vehicle Identification Number (VIN) to: 1mYR031000
• Construction Year to: 11.1999
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 32
• Length [mm]: 30
• paired article number: 270862
• Weight [kg]: 0.03
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Stabiliser Diameter [mm]: 21
• for PR number: 0AL
• Inner Diameter [mm]: 19
• Observe service information:
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW 19MM Z OBEJM¤
• Manufacturer: MAX

• Inner Diameter [mm]: 21
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with holder
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW 21MM Z OBEJM¤
• Manufacturer: MAX

• Fitting Position: Front, Left, Right
• Diameter [mm]: 21
• Quantity per packing unit: 2
• Inner Diameter 1 [mm]: 19
• Thickness 1 [mm]: 25
• Manufacturer: DELPHI

• Fitting Position: Front Axle both sides
• Required quantity: 2
• Inner Diameter [mm]: 21
• paired article number: VKDS 351005
• Manufacturer: SKF
• Name: SK VKDS351005

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Construction Year to: 09.2000
• Inner Diameter [mm]: 20
• Outer Diameter [mm]: 36
• Length [mm]: 26
• Stabiliser Diameter [mm]: 21
• paired article number: 270725
• Weight [kg]: 0.03
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front
• Mounting Type: Rubber Mount
• Weight [g]: 87
• Name: IM 35684
• Manufacturer: ORIGINAL IMPERIUM

• Construction Year from: 10.2000
• Fitting Position: Left, Right, inner, outer
• Diameter [mm]: 23
• Weight [kg]: 0.1
• Required quantity: 2
• Mounting Type: Rubber Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Stabiliser Diameter [mm]: 21
• for PR number: 0AL
• Inner Diameter [mm]: 18
• Fitting Position: Front Axle
• Weight [kg]: 0.076
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with holder
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - K„„ndmik. VW P. GOLF4/A3 18MM KPL. ZE —RUB¤ NA JEDN¤ STRON¨

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Kinnitus,stabilisaatoripaigutus
• Manufacturer: FAG

• Vehicle Identification Number (VIN) to: 1M-1-035 000, 1M-1-136 650
• Stabiliser Diameter [mm]: 21, 18
• Block Separation:
• Fitting Position: Front Axle Left, Front Axle Right
• Diameter [mm]: 18
• Required quantity: 2
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 21
• Stabiliser Diameter [mm]: 23
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Stabiliser Diameter [mm]: 23
• for PR number: 0AE
• Inner Diameter [mm]: 21
• Fitting Position: Front Axle
• Weight [kg]: 0.11
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with holder
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 21
• Quantity Unit: Set
• Required quantity: 1
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: MEY

• Fitting Position: inner, Front Axle
• Material: PU (Polyurethane)
• Colour: red
• Supplementary Article/Info 2: with grease cap
• Inner Diameter [mm]: 20
• Required quantity: 2
• Weight [kg]: 0.02
• Length [mm]: 25
• Shore-A hardness value, base body: 80
• Manufacturer: TEDGUM
• Name: TG TED23094