Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Inner Diameter [mm]: 32
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: JP GROUP
- Lisainfo: EGR Valve
- Additional information: EGR Valve
- Quantity per packing unit: 10
-
Shape: round,
O- Ring - Inner Diameter [mm]: 55
-
Material: MVQ
(silicone rubber) - Thickness [mm]: 3
- Outer Diameter [mm]: 61
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 1
- Width [mm]: 46
- Length [mm]: 76
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: AJU
- Fitting Position: Pipe at manifold
- Material: Stainless Steel
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
-
Shape: O-
Ring - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Lower
- Gasket Design: Fibre Composite
- Chemical Properties: Asbestos Free
- Mounting Type: Flange mounting
- Number of flange connections: 2
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Inner Diameter [mm]: 32
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Quantity per packing unit: 10
- Gasket Design: Steel
- Mounting Type: Flange mounting
- Flange Hole Diameter [mm]: 25
- Number of flange connections: 2
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Shape: round
- Material: Rubber
-
Name: Tihend,
EGR- klapp - Manufacturer: MAX
-
Lisainfo: 70-
0130 -
Additional information: 70-
0130
- Quantity per packing unit: 5
- Inner Diameter [mm]: 32
- Manufacturer: ELRING
- Lisainfo: 729.970 ELR
- Additional information: 729.970 ELR
- Fitting Position: Pipe at manifold
- Material: Stainless Steel
- Manufacturer: DRIVE
-
Engine Code: AGR,
ALH - Fitting Position: Pipe at manifold
- Block Separation:
- Required quantity: 3
- Inner Diameter [mm]: 22
- Manufacturer: ELRING
- Weight [kg]: 0.007
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ALH
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Manufacturer: KAMOKA
- Additional information: F19024
- Lisainfo: F19024
- Plug Type: Blade Terminal Sleeve
- Plug housing design: Plug sleeve housing
- Number of pins: 2
-
Manufacturer Restriction: Mercedes-
Benz, VAG, Scania - Socket Width [mm]: 2.8
- Cable Cross Section [mm²]: 0.75
- Protection Type (IP Code): IP X7
- Cable Length [mm]: 500
-
for article number: 82710249,
82710380, 82710396 -
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals, with hose - Supplementary Article/Info 2: with pipe
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
keskne elektrissteem - Manufacturer: HBE
- Lisainfo: 50390266
- Additional information: 50390266
- Voltage [V]: 12
- Number of pins: 2
- Operating Mode: Electric
- Valve type: Solenoid Valve
-
for OE number: 1J0906283B,
1J0906283C, 1K0906283A, 1K0906283 - Weight [kg]: 1.1
- Packaging length [cm]: 21
- Packaging width [cm]: 21
- Packaging height [cm]: 17
- Manufacturer: AKSDASIS
-
Vehicle Identification Number (VIN) to: 1M-
X- 999 999 - Manufacturer Restriction: VAG
- Number of pins: 2
- Cable Length [mm]: 500
- Cable Cross Section [mm²]: 1
-
Contact surface: Tin-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
EGR- klapp - Manufacturer: HBE
-
Supplementary Article/Supplementary Info: without EGR cooler,
with gaskets/ seals - Operating Mode: pneumatic
-
Fabrication Number: EGR-
AU- 003 - Manufacturer: NTY
-
Name: NTY EGR-
AU- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Name: EGR-
klapp - Manufacturer: MAG
- Lisainfo: EV080C
- Additional information: EV080C
- Operating Mode: pneumatic
- Manufacturer: ASHIKA
- Engine Code: AGR
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: without EGR cooler,
with gaskets/ seals - Manufacturer: DENCKERMANN FILTRY
- Operating Mode: pneumatic
- Manufacturer: JAPKO
-
Engine Code: ALH,
AGR - Block Separation:
- Valve type: Diaphragm Valve
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Name: EGR-
KLAPP - Manufacturer: MAX
- Operating Mode: pneumatic
- Manufacturer: JPN
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Packaging length [cm]: 13
- Packaging width [cm]: 10
- Packaging height [cm]: 10
- Weight [kg]: 0.32
-
for OE number: 38131501,
038131501AG, 038131501BB, 038131501C - Valve type: Diaphragm Valve
- Manufacturer: AKSDASIS
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: without gasket/
seal - for OE number: 045131501L
-
Name: EGR-
klapp - Manufacturer: MD
- Engine Code: ALH
- Cooling Type: Air cooled
- Operating Mode: pneumatic
- for OE number: 045131501L
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: NRF
Manufacturer: MAGNETI MARELLI
-
Vehicle Identification Number (VIN) from: 1M-
X- 000 001 -
Vehicle Identification Number (VIN) to: 1M-
X- 025 000 - Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: DRM 211109
- Manufacturer: DR.MOTOR AUTOMOTIVE
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Quality: OE EQUIVALENT
- for OE number: 571822112046
-
Name: EGR-
klapp - Manufacturer: MD
- Engine Code: ALH
- Quality class: PJ
- Name: Exhaust gas recirculation valve
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Packaging length [cm]: 19
- Packaging width [cm]: 19
- Packaging height [cm]: 18
-
for OE number: 038131501E,
045131501C, 045131501L - Valve type: Diaphragm Valve
- Weight [kg]: 0.74
- Manufacturer: AKSDASIS
- Operating Mode: pneumatic
- Regulator: with vacuum governor
- New Part:
- Used part return not required:
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of Gaskets/Seals/Seal Rings: 3
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Manufacturer: WAHLER-
TERMOSTATY
- Engine Code: ALH
- Material: Aluminium
- Operating Mode: pneumatic
-
Name: EGR-
klapp - Manufacturer: NIS
-
Lisainfo: SEAT AROSA
(6H) (97- ) 1.4 TDi -
Additional information: SEAT AROSA
(6H) (97- ) 1.4 TDi
Supplementary Article/Info 2: without sensor, with vacuum bypass, without cable, without electronics Technical Information: FIRST FIT - Includes gaskets and O-rings when needed
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Manufacturer: BORGWARNER
(WAHLER)
- Operating Mode: pneumatic
-
Name: EGR-
KLAPP - Manufacturer: JPA
-
Name: EGR-
KLAPP - Manufacturer: MAG
- Construction Year from: 04.1999
- Construction Year to: 09.2002
- Engine Code: AGR
- Operating Mode: pneumatic
- Supplementary Article/Info 2: with EGR valve
-
Supplementary Article/Supplementary Info: without EGR cooler,
with gaskets/ seals - Emission Standard: Euro 1
- Manufacturer: VALEO
- Weight [kg]: 0.58
- for OE number: 045 131 501 L
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Guarantee: 5 years guarantee
- Name: HU 138475
-
Manufacturer: HUECO /
HITACHI
- New Part:
- Engine Code: ALH
- Housing Type: Aluminium Housing
- Operating Mode: pneumatic
- Cooling Type: Air cooled
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Name: EGR-
KLAPP - Manufacturer: TRI
-
Engine Code: AGR,
ALH - Block Separation:
- Valve type: Diaphragm Valve
- Operating Mode: pneumatic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: PIERBURG
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Operating Mode: Vacuum-
controlled - Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6NU010171311
- Quantity per packing unit: 5
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
- Alternatively:
- Quantity per packing unit: 100
- Inner Diameter [mm]: 54.5
- Thickness [mm]: 3
-
Material: FPM
(fluoride rubber)
- Quantity per packing unit: 5
- Inner Diameter [mm]: 54.5
- Thickness [mm]: 3
-
Material: FPM
(fluoride rubber) - Alternatively:
- Quantity per packing unit: 100
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks