• Engine Code: ALH
• Vehicle Identification Number (VIN) from: 1M-Y-026001
• Inner Diameter [mm]: 43.95
• Lisainfo: Seal, turbo air hose
• Additional information: Seal, turbo air hose

• Fitting Position: Lower
• Weight [kg]: 0.1
• Weight [g]: 100
• Inner Diameter 1 [mm]: 60
• Manufacturer: METALCAUCHO

• Transmission Type: Manual Transmission
• Model Year from: 2002
• for combined PR number: G0C+M0G, G0C+MD1, G0C+MF4, G0C+MN0
• Weight [kg]: 0.003
• Packaging length [cm]: 5.3
• Packaging width [cm]: 5.3
• Packaging height [cm]: 0.5
• Inner Diameter [mm]: 44
• Outer Diameter [mm]: 53
• Manufacturer: FEBEST

• Length [mm]: 70
• for OE number: 1J0145834A
• Manufacturer: NRF

• Production date from: 01/99
• Production date to: 12/04
• Fitting Position: Charge Air Cooler
• for OE number: 1J0145834A
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• for OE number: 3C0145117J
• Weight [g]: 11
• Name: IM 20280
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: behind exhaust turbocharger
• Length [mm]: 58
• Outer Diameter [mm]: 44
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Engine Code: AGR
• Vehicle Identification Number (VIN) from: 1M-Y-026001
• Quantity per packing unit: 10
• Diameter [mm]: 44
• Weight [kg]: 0.025
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1J0 145 828 B
• Fitting Position: Charge Air Cooler, Lower
• Length [mm]: 310
• Outer Diameter [mm]: 45
• Name: Ohutoru,ohufilter
• Manufacturer: MAX

• for OE number: 1J0 145 838 B
• Connection Diameter (pressure side) [mm]: 56
• Connection Diameter (suction side) [mm]: 56
• Fabrication Number: GPP-VW-035
• Manufacturer: NTY

• Material: Rubber with fabric lining
• Supplementary Article/Info 2: without clamps
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 1J0 145 838 B
• Manufacturer: KAMOKA

• Engine Code: ALH
• Vehicle Identification Number (VIN) to: 1-Y-026 000
• Weight [kg]: 0.253
• Weight [g]: 253
• Manufacturer: METALCAUCHO
• Lisainfo: MC09069 METALCAUCHO
• Additional information: MC09069 METALCAUCHO

• for OE number: 6K0 145832 E
• Fitting Position: Charge Air Cooler, Throttle Housing
• Length [mm]: 341
• Outer Diameter 1 [mm]: 56
• Outer Diameter 2 [mm]: 59
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• for OE number: 6K0 145838 B
• Length [mm]: 190
• Outer Diameter [mm]: 55
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Weight [kg]: 0.284
• Weight [g]: 284
• Manufacturer: METALCAUCHO

• for OE number: 1J0 145 828 H
• Fitting Position: Charge Air Cooler, Lower
• Length [mm]: 271
• Outer Diameter [mm]: 44
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 1J0145828H
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Length [mm]: 271
• for OE number: 1J0 145 828 H
• Fitting Position: Charge Air Cooler, Lower
• Outer Diameter [mm]: 44
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Turbocharger Line: Cold Side, Piping to engine block
• Hose Length [mm]: 255
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 47
• Manufacturer: DENCKERMANN FILTRY

• Colour: black
• Material: AEM (Ethylene Acrylate Rubber)
• Inner Diameter 1 [mm]: 34
• Inner Diameter 2 [mm]: 33
• Guarantee: 3 years guarantee
• Weight [kg]: 0.19
• Hose Length [mm]: 245
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV732
• Manufacturer: ESEN SKV

• for OE number: 1J0145828B
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Production date from: 01/99
• Production date to: 12/01
• Fitting Position: Outlet
• for OE number: 1J0145828B
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Fitting Position: engine sided, Lower
• Connection Diameter (pressure side) [mm]: 42
• Connection Diameter (suction side) [mm]: 43
• Manufacturer: YSPARTS

• Fitting Position: Right Rear
• Cooling Hose: Cold Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV086
• Manufacturer: ESEN SKV

• Engine Code: ALH
• Manufacturer: JP GROUP A/S
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Length [mm]: 310
• for OE number: 1J0 145 828 B
• Fitting Position: Charge Air Cooler, Lower
• Outer Diameter [mm]: 45
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Production date from: 01/99
• Production date to: 12/01
• Fitting Position: Outlet
• for OE number: 1J0145828H
• Manufacturer: SASIC

• Fitting Position: Left Front
• Cooling Hose: Turbocharger to piping, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.26
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV040
• Manufacturer: ESEN SKV

• for OE number: 1J0145828H
• Weight [g]: 222
• Length [mm]: 248
• Inner Diameter 1 [mm]: 34
• Inner Diameter 2 [mm]: 33
• Name: IM 221906
• Manufacturer: ORIGINAL IMPERIUM

• General Information: Turbo charger air pipe
• Manufacturer: VIKA

• Construction Year to: 07.2004
• Engine Code: ALH
• Vehicle Identification Number (VIN) to: 1M-Y-026 000
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 245
• Inner Diameter 1 [mm]: 34
• Inner Diameter 2 [mm]: 33
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Fabrication Number: GPP-VW-134
• Material: Rubber with fabric lining
• Manufacturer: NTY

• for OE number: 1J0 145 838 B
• Fitting Position: Charge Air Cooler, Upper
• Length [mm]: 296
• Outer Diameter [mm]: 56
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 44
• Connection Diameter (suction side) [mm]: 55
• Fabrication Number: GPP-VW-048
• Manufacturer: NTY

• Length [mm]: 296
• for OE number: 1J0 145 838 B
• Fitting Position: Charge Air Cooler, Upper
• Outer Diameter [mm]: 56
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Fitting Position: Upper, engine sided
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Right Rear
• Cooling Hose: Piping to engine block, Cold Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV008

• Construction Year to: 07.2004
• Turbocharger Line: Cold Side, Piping to engine block
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 255
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 47
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Production date from: 01/99
• Production date to: 12/04
• for OE number: 1J0145838B
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Construction Year to: 07.2004
• Engine Code: AGR
• Vehicle Identification Number (VIN) to: 1M-Y-026 000
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 290
• Inner Diameter 1 [mm]: 34
• Inner Diameter 2 [mm]: 34
• Observe broschure:
• Manufacturer: GATES

• Engine Code: ALH
• Vehicle Identification Number (VIN) to: 1M-Y-026 000
• Fitting Position: Left, Lower, Front
• Colour: black
• Material: AEM (Ethylene Acrylate Rubber)
• Inner Diameter 1 [mm]: 34
• Inner Diameter 2 [mm]: 33
• Manufacturer: BORG & BECK

• General Information: pressure hose
• Manufacturer: VIKA

• Quantity: 1
• Material: Rubber with fabric lining
• Fitting Position: engine sided, Upper
• General Information: pressure hose
• Manufacturer: VIKA

• Fitting Position: Right
• Material: PE (Polyethylene)
• Turbocharger Line: Cold Side
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MEY

• Quantity per packing unit: 5
• Inner Diameter [mm]: 43.95
• Quantity: 5
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: DRM

• Inner Diameter [mm]: 47
• Outer Diameter [mm]: 56
• Turbocharger Line: Charge air cooler to intake manifold
• Material: ACM (Polyacrylate)
• Fitting Position: Charge Air Cooler, Upper
• Weight [kg]: 0.25
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Centre
• Cooling Hose: Cold Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.36
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• for OE number: 1J0145838B
• Weight [g]: 280
• Length [mm]: 226
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 47
• Name: IM 221907
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Exhaust Turbocharger, Outlet
• Manufacturer: NRF

• Fabrication Number: GPP-VW-034
• Cooling Hose: Cold Side
• Manufacturer: NTY

• Engine Code: ALH
• Vehicle Identification Number (VIN) from: 1M-Y-026001
• Fitting Position: Lower
• Manufacturer: JP GROUP
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Fabrication Number: GPP-VW-112
• Manufacturer: NTY

• Engine Code: ALH
• Turbocharger Line: Hot Side, Turbocharger to piping
• Vehicle Identification Number (VIN) from: 1M-Y-026 001
• Hose Length [mm]: 260
• Inner Diameter 1 [mm]: 38
• Inner Diameter 2 [mm]: 35
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 1J0145828T
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Material: Rubber with fabric lining
• Supplementary Article/Info 2: without clamp
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Identification Number (VIN) from: 1M-Y-026001
• Fitting Position: Lower, engine sided
• Supplementary Article/Supplementary Info: with gasket/seal, with quick coupling
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Model Year from: 2000
• for OE number: 1J0 145828 AA
• Fitting Position: Charge Air Cooler, Lower
• Length [mm]: 310
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 41
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Engine Code: ALH
• Vehicle Identification Number (VIN) from: 1M-Y-026 001
• Fitting Position: Charge Air Cooler, Lower
• Material: AEM (Ethylene Acrylate Rubber)
• Name: Laadimisohu voolik
• Manufacturer: MEY

• Fitting Position: Outlet
• for OE number: 1J0145828T
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Vehicle Identification Number (VIN) from: 1M-Y-026001
• Fitting Position: Right Front
• Cooling Hose: Turbocharger to piping, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.28
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV007

• Production date from: 01/99
• Production date to: 12/01
• Fitting Position: Outlet
• for OE number: 1J0145828AA
• Manufacturer: SASIC

• Material: Rubber with fabric lining
• Fitting Position: Charge Air Cooler, Upper
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Quantity: 1
• Material: Rubber with fabric lining
• Fitting Position: engine sided, Lower
• General Information: pressure hose
• Manufacturer: VIKA

• Construction Year to: 07.2004
• Engine Code: ALH
• Vehicle Identification Number (VIN) from: 1M-Y-026 001
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 260
• Inner Diameter 1 [mm]: 38
• Inner Diameter 2 [mm]: 34.5
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Engine Code: AGR, ALH
• Fitting Position: Left Front
• Length [mm]: 360
• Colour: black
• Material: AEM (Ethylene Acrylate Rubber)
• Cooling Hose: Turbocharger to piping, Hot Side
• Inner Diameter 1 [mm]: 30
• Inner Diameter 2 [mm]: 34
• Guarantee: 3 years guarantee
• Weight [kg]: 0.24
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV924
• Manufacturer: ESEN SKV

• Engine Code: ALH
• Vehicle Identification Number (VIN) from: 1-Y-026 001
• Weight [kg]: 0.45
• Weight [g]: 0.093, 450
• Manufacturer: METALCAUCHO

• Construction Year to: 07.2004
• Engine Code: AGR
• Vehicle Identification Number (VIN) from: 1M-Y-026 001
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 360
• Inner Diameter 1 [mm]: 30
• Inner Diameter 2 [mm]: 34
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Length [mm]: 310
• for OE number: 1J0 145828 AA
• Fitting Position: Charge Air Cooler, Lower
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 41
• Model Year from: 2000
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Engine Code: AGR
• Connector type: OE PUSH CONNECTOR
• Colour: black
• Material: AEM (Ethylene Acrylate Rubber)
• Inner Diameter 1 [mm]: 30
• Inner Diameter 2 [mm]: 34
• Manufacturer: BORG & BECK

• Engine Code: ALH
• Fitting Position: Left, Lower, Front
• Connector type: OE PUSH CONNECTOR
• Colour: black
• Material: AEM (Ethylene Acrylate Rubber)
• Inner Diameter 1 [mm]: 38
• Inner Diameter 2 [mm]: 35
• Manufacturer: BORG & BECK

• Engine Code: ALH
• Vehicle Identification Number (VIN) from: 1M-Y-026 001
• Turbocharger Line: Hot Side, Turbocharger to piping
• Compression ring material: Stainless Steel
• for OE number: 1J0 145 828 T
• Material: Rubber with fabric lining
• Weight [kg]: 0.272
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1J0145838AG, 1J0145838R, 1J0145838Q
• Fitting Position: Charge Air Cooler, Upper
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• Fitting Position: Right Rear
• Cooling Hose: Piping to engine block, Cold Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.46
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV043