Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
Lisainfo: "Tootja: TEKNOROT
VW GOLF4/OCTAVIA/ A3
(kvaliteediklass: PJ)"
- Diameter 4 [mm]: 23
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23
- Length from [mm]: 26
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
-
Vehicle Identification Number (VIN) to: 1M-
1- 035 000 -
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 14
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Vehicle Identification Number (VIN) to: 1M-
4- 136 650 - for PR number: 0AQ
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 19
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 21
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Required quantity: 2
- Diameter [mm]: 21
- Lisainfo: AUDI A3
- Additional information: AUDI A3
- Fitting Position: Front
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Production date from: 04/
99 - Fitting Position: Front Axle
- Inner Diameter [mm]: 14.5
- Outer Diameter [mm]: 29
- Length 1 [mm]: 22.5
- Length 2 [mm]: 18
- for OE number: 1J0411327
- Manufacturer: SASIC
-
Production date from: 04/
99 - Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 21
- Inner Diameter [mm]: 19.5
- Length [mm]: 25
- Width [mm]: 37
- Height [mm]: 40
- for OE number: 1J0411314R
- Manufacturer: SASIC
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Stabiliser Diameter [mm]: 23
- SVHC: No SVHC present!
-
Name: Kinnitus,
stabilisaator - Manufacturer: FAG
-
Stabiliser Diameter [mm]: 20.7,
21 -
Vehicle Identification Number (VIN) to: 1M-
1- 035000 - Block Separation:
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Replace in pairs only:
- new version:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Stabiliser Diameter [mm]: 23
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 25
- Width [mm]: 37
- Height [mm]: 36
- Inner Diameter [mm]: 21
- Manufacturer: 3RG
- Fitting Position: Front Axle
- Diameter [mm]: 23
- Manufacturer: OYODO
-
Production date from: 04/
99 - Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 23
- Inner Diameter [mm]: 21.5
- Length [mm]: 25
- Width [mm]: 37
- Height [mm]: 40
- for OE number: 1J0411314T
- Manufacturer: SASIC
- Stabiliser Diameter [mm]: 21
- for PR number: 0AL
- Fitting Position: Front Axle
- Inner Diameter [mm]: 18
- Manufacturer: OYODO
-
Fitting Position: Front Axle,
Left, Right - Diameter [mm]: 21
- Required quantity: 2
- Manufacturer: OYODO
-
Stabiliser Diameter [mm]: 20.7,
21 -
Vehicle Identification Number (VIN) to: 1M-
1- 035000 - Block Separation:
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Replace in pairs only:
- Shape: slotted
- old version:
- for OE number: 1J0 411 314C
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 4
- Fitting Position: Front Axle
- Weight [kg]: 0.02
- Inner Diameter [mm]: 21
- Mounting Type: Rubber Mount
- Weight [g]: 20
- Manufacturer: METALCAUCHO
- Stabiliser Diameter [mm]: 23
-
Vehicle Identification Number (VIN) from: 1M-
X- 010001 -
Vehicle Identification Number (VIN) to: 1M-
1- 035000 -
Material: Rubber/
Metal - Inner Diameter [mm]: 10
- Mounting Type: Rubber Mount
- Required quantity: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.047
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 4
- Mounting Type: Rubber Mount
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 22
- Weight [kg]: 0.085
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 4
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.037
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.022
-
Inner Diameter [mm]: 20,
21 - Mounting Type: Rubber Mount
- Weight [g]: 22
- Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 21
- Outer Diameter [mm]: 37
- Length [mm]: 19
- paired article number: 270726
- Weight [kg]: 0.02
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Stabiliser Diameter [mm]: 21
- for PR number: 0AL
- Inner Diameter [mm]: 19
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: MAX
-
Fitting Position: Front Axle,
Front Axle both sides - Quantity: 2
-
Vehicle Identification Number (VIN) to: 1M-
1- 035 000, 1M- 4- 136 650 - Weight [kg]: 0.06
-
Material: Rubber with fabric lining,
Rubber - Required quantity: 2
- Inner Diameter [mm]: 19
- General Information: rubber bush; 19MM
- Manufacturer: VIKA
- Stabiliser Diameter [mm]: 21
- for PR number: 0AL
- new version:
- Inner Diameter [mm]: 18
- Fitting Position: Front Axle
- Weight [kg]: 0.026
- Observe service information:
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
- Fitting Position: Front Axle both sides
- Material: Sheet Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.02
-
Fitting Position: inner,
Front Axle - Mounting Type: Rubber Mount
- Required quantity: 2
- Inner Diameter [mm]: 20
- Length [mm]: 25
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle,
Front - Quantity: 2
-
Vehicle Identification Number (VIN) from: 1M-
1- 035 001 -
Vehicle Identification Number (VIN) to: 1M-
1- 035 000 - Weight [kg]: 0.05
- Required quantity: 2
- General Information: clamp
- Manufacturer: VIKA
-
Fitting Position: Right,
Left, Front Axle - Diameter [mm]: 19
- Weight [kg]: 0.02
- Manufacturer: CORTECO
- Construction Year to: 11.2003
-
Fitting Position: both sides,
Front - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 24
- Inner Diameter [mm]: 21
- Manufacturer: GATES
-
Fitting Position: Front Axle Right,
Front Axle Left - Material: Metal
- Manufacturer: 3RG
-
Vehicle Identification Number (VIN) from: 1M-
X- 010 001 - Inner Diameter [mm]: 10
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
Fitting Position: Front Axle both sides, Front Axle Left, Front Axle Right
-
Fitting Position: Front Axle,
Front Axle both sides - Quantity: 2
-
Vehicle Identification Number (VIN) from: 1M-
1- 035 001 -
Vehicle Identification Number (VIN) to: 1M-
1- 035 000 - Weight [kg]: 0.06
- Material: Rubber
- Required quantity: 2
- Inner Diameter [mm]: 21
- General Information: rubber bush; 21MM
- Manufacturer: VIKA
- Stabiliser Diameter [mm]: 21
- for PR number: 0AL
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 18
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front Axle
- Inner Diameter [mm]: 21
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Length [mm]: 48
- Width [mm]: 30
- Thickness [mm]: 40
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 48
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.034
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 5
-
Fitting Position: Front Axle,
Centre - Weight [kg]: 0.075
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 1J0 411 314 S
- Manufacturer: GSP
- for PR number: 0AE
- Fitting Position: Front Axle both sides
-
Name: KINNITUS,
STABILISAATORIPAIGUTUS - Manufacturer: MAX
-
Fitting Position: Front,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 21
- Mounting Type: Rubber Mount
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
-
Production date from: 01/
02 -
Production date to: 09/
04 -
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 21.7
- Inner Diameter [mm]: 20.2
- Length [mm]: 30
- Width [mm]: 48
- Height [mm]: 41
- for OE number: 1J0511423
- Manufacturer: SASIC
- Fitting Position: Axle beam
- General Information: Rubber bush
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Inner Diameter [mm]: 21
- Net weight [kg]: 0.05
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: NK
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
- Stabiliser Diameter [mm]: 21.7
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Stabiliser Diameter [mm]: 21
-
Guarantee: 3 years guarantee or up to 75,
000km - Alternative Repair Kit: 52056548
- Manufacturer: METZGER
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 21
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW 21MM LE/ PR - Manufacturer: MEY
- Fitting Position: Rear Axle Left
- Material: Rubber
- Weight [g]: 36
- Inner Diameter [mm]: 11
- Fitting Position: Front
- Manufacturer: KAMOKA
-
Vehicle Identification Number (VIN) to: 1M-
4- 136 650 - for PR number: 0AQ
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 19
- Quantity Unit: Piece
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW 19MM - Manufacturer: MEY
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 39
- Length [mm]: 37
- Name: ALT 83245PAAL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 19
- Outer Diameter [mm]: 39
- Length [mm]: 37
- Name: ALT 83244PAAL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle both sides,
Lower - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Length [mm]: 24.6
- Weight [kg]: 0.024
- Manufacturer: RTS
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 11
- Length [mm]: 30
- Required quantity: 2
- Mounting Type: Rubber Mount
- Name: ALT 93444AL
- Manufacturer: ALTE AUTOMOTIVE
-
Vehicle Identification Number (VIN) to: 1M-
4- 136 650 - Fitting Position: Front Axle both sides
- Required quantity: 2
- paired article number: VKDS 351004
- Height [mm]: 37
- Inner Diameter [mm]: 19
- Manufacturer: SKF
- Name: SK VKDS351004
- Required quantity: 2
- Stabiliser Diameter [mm]: 21.7
-
Fitting Position: inner,
Rear Axle - Weight [kg]: 0.04
- Manufacturer: TEDGUM_TD
- Fitting Position: Front Axle
- Manufacturer: GSP
- Weight [g]: 107
- Name: IM 37254
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Front,
Left, Right - Diameter [mm]: 23
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 21
- Thickness 1 [mm]: 25
- Manufacturer: DELPHI
- Name: DE TD561W
- for PR number: 0AE
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.05
- Observe service information:
-
Name: KINNITUS,
STABILISAATORIPAIGUTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Diameter [mm]: 21
- Weight [kg]: 0.1
- Required quantity: 2
- Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
- Stabiliser Diameter [mm]: 21
- for PR number: 0AL
- Inner Diameter [mm]: 19
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW 19MM Z OBEJM¤ - Manufacturer: MAX
- Inner Diameter [mm]: 21
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: with holder
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW 21MM Z OBEJM¤ - Manufacturer: MAX
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 21
- paired article number: VKDS 351005
- Manufacturer: SKF
- Name: SK VKDS351005
-
Fitting Position: Front,
Left, Right - Diameter [mm]: 21
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 19
- Thickness 1 [mm]: 25
- Manufacturer: DELPHI
- Name: DE TD560W
- Stabiliser Diameter [mm]: 18
- Length [mm]: 48
- Width [mm]: 30
- Thickness [mm]: 30
- Inner Diameter [mm]: 16.2
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.037
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Mounting Type: Rubber Mount
- Weight [g]: 85
- Name: IM 35684
- Manufacturer: ORIGINAL IMPERIUM
- Stabiliser Diameter [mm]: 21
- for PR number: 0AL
- Inner Diameter [mm]: 18
- Fitting Position: Front Axle
- Weight [kg]: 0.076
- Supplementary Article/Supplementary Info: with holder
- Supplementary Article/Info 2: with screw
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - Kndmik. VW P. GOLF4/A3 18MM KPL. ZE RUB¤ NA JEDN¤ STRON¨
- Fitting Position: Front Axle
- SVHC: No SVHC present!
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: FAG
-
Fitting Position: Left,
Right, inner, outer - Diameter [mm]: 23
- Weight [kg]: 0.1
- Required quantity: 2
- Mounting Type: Rubber Mount
- Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
-
Vehicle Identification Number (VIN) to: 1M-
1- 035 000, 1M- 1- 136 650 -
Stabiliser Diameter [mm]: 21,
18 - Block Separation:
-
Fitting Position: Front Axle Left,
Front Axle Right - Diameter [mm]: 18
- Required quantity: 2
-
Guarantee: 3 years guarantee or up to 75,
000km - Manufacturer: METZGER
- Stabiliser Diameter [mm]: 23
- for PR number: 0AE
- Inner Diameter [mm]: 21
- Fitting Position: Front Axle
- Weight [kg]: 0.11
- Supplementary Article/Supplementary Info: with holder
- Supplementary Article/Info 2: with screw
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Info 2: with grease cap
- Length [mm]: 25
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.022
- Inner Diameter [mm]: 21
- Colour: red
-
Material: PU
(Polyurethane) - Shore-A hardness value, base body: 80
- Required quantity: 2
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
-
Fitting Position: inner,
Front Axle - Length [mm]: 25
-
Material: PU
(Polyurethane) - Inner Diameter [mm]: 20
- Supplementary Article/Info 2: with grease cap
- Shore-A hardness value, base body: 80
- Required quantity: 2
- Weight [kg]: 0.02
- Colour: red
- Manufacturer: TEDGUM_TD
- Supplementary Article/Info 2: with grease cap
- Length [mm]: 25
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.023
- Inner Diameter [mm]: 19
- Colour: red
-
Material: PU
(Polyurethane) - Shore-A hardness value, base body: 80
- Required quantity: 2
- Manufacturer: TEDGUM_TD
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 21
- Quantity Unit: Set
- Required quantity: 1
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: MEY
- Fitting Position: Front Axle Right
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle Left
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 19
- Quantity Unit: Set
- Required quantity: 1
- Manufacturer: MEY
Name: Paigutus - Kndmik VW P. GOLF 4 WEW 19MM KPL. NA DWIE STRONY Z OBEJMAMI
- Length [mm]: 25
- Supplementary Article/Info 2: with grease cap
- Shore-A hardness value, base body: 80
- Inner Diameter [mm]: 17
-
Fitting Position: inner,
Front Axle -
Material: PU
(Polyurethane) - Colour: red
- Weight [kg]: 0.05
- Required quantity: 2
- Manufacturer: TEDGUM
- Vehicle Identification Number (VIN) from: ******1M*1*035001
- Stabiliser Diameter [mm]: 23
- for PR number: 0AE
- Inner Diameter [mm]: 21
- Material: Plastic
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.704
- Supplementary Article/Info 2: with coupling rod
- Observe service information:
-
Name: Remondikomplekt,
stabilisaatori otsavarras - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Diameter [mm]: 21
- for PR number: 0AL
- Inner Diameter [mm]: 18
- Fitting Position: Front Axle
- Weight [kg]: 0.88
- Supplementary Article/Info 2: with coupling rod
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks