• Fitting Position: outer, Rear Axle, Lower
• Vehicle configuration line / variant: AT WHEEL CARRIER
• Axle: Multi-link Axle
• for PR number: 0N4
• Article number of recommended accessories: 8500 298001
• Control/Trailing Arm Type: Control Arm
• Width [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Mounting Type: Rubber-Metal Mount
• Lisainfo: AUDI, SEAT, SKODA, VW
• Additional information: AUDI, SEAT, SKODA, VW

Technical Information: "See accessories list for bolt kit, bolts are not included"

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Front, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12
• Width [mm]: 31
• for OE number: 1K0 407 182
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ZTP-VW-001A
• Manufacturer: NTY

Fitting Position: Front Axle, inner, in front of axle, Left, Right, Lower

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1K0 505 553
• Manufacturer: GSP
• Lisainfo: 512247 GSP
• Additional information: 512247 GSP

• Fitting Position: Lower, Lower Front Axle
• for OE number: 1K0 407 182
• Manufacturer: GSP

• Fitting Position: Front Axle, Front
• Total Length [mm]: 54
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 12
• Manufacturer: CORTECO

• Fitting Position: Rear Axle, Centre
• for OE number: 1K0 505 541 B
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 242
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 54
• Name: IM 1620
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Width [mm]: 40
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Manufacturer: FAST

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 53
• Manufacturer: DELPHI
• Name: DE TD521W

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 54
• Name: ALT 81191AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle
• Axle alignment required after fitting:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 5Q0407182A
• Manufacturer: SASIC
• Additional information: 9001759
• Lisainfo: 9001759

• Fitting Position: Rear Axle, outer, Lower
• Axle: Multi-link Axle
• for PR number: 0N4
• Inner Diameter 1 [mm]: 49
• Outer Diameter 1 [mm]: 12
• Thickness 1 [mm]: 38
• Manufacturer: DELPHI
• Name: DE TD1058W

• Fitting Position: Rear Axle, Lower, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 50
• Name: ALT 94739AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.183
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF5/JETT3/
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right, Centre
• Material: Rubber/Metal
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Manufacturer: MERTZ

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.187
• Observe service information:
• Name: SW 30 92 4390
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 5Q0407182A
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: DA DSS1079
• Manufacturer: DAYCO

• Axle: Multi-link Axle
• for PR number: 0N4
• Height 1 [mm]: 50
• Height 2 [mm]: 28
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Manufacturer: KAVO

Fitting Position: Rear Axle, outer, Steering Knuckle, wheel suspension, Lower

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Rear
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: for trailing arm
• Quantity per axle: 2
• Article number of recommended accessories: 38906 01, 43359 01, 44089 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.18
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year from: 2020
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.205
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Packaging length [cm]: 5.4
• Packaging width [cm]: 4.8
• Packaging height [cm]: 4.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• for OE number: 5Q0407183K
• Manufacturer: SASIC

• Fitting Position: Rear Axle, Upper, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 45
• Name: ALT 88666AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, Front
• Axle: Multi-link Axle
• for PR number: 0N4
• Height 1 [mm]: 63.8
• Height 2 [mm]: 44.5
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.3
• Manufacturer: KAVO

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• for OE number: 5Q0505541A
• Manufacturer: SASIC

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Height [mm]: 64
• Name: ALT 91581AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik VW P. GOLF7/A3 12-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Base body material: Steel
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 13
• Width [mm]: 50
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Lower, Front Axle Right
• for OE number: 5Q0 407 183 G
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front
• General Information: wishbone arm; front
• Manufacturer: VIKA

• Fitting Position: Rear Axle, Upper, both sides, outer
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Article number of recommended accessories: 38910 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Weight [kg]: 0.074
• Fitting Position: Rear Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 38.1
• Length [mm]: 45
• Manufacturer: RTS

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Upper, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Length [mm]: 45
• Manufacturer: RTS

• Fitting Position: Rear Axle, Upper, both sides, inner
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Article number of recommended accessories: 38910 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, outer, Lower
• Axle: Multi-link Axle
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 37.4
• Width 1 [mm]: 50
• Width 2 [mm]: 28
• SVHC: No SVHC present!
• Manufacturer: FAG

• Name: Puks
• Manufacturer: LMI

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Front, outer SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Model Year from: 2020
• Fitting Position: Lower Front Axle, behind the axle
• Weight [kg]: 0.301
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

for combined PR number: 1LD+2H0+0AD, 1LD+2H0+0AE, 1LD+2H0+0AF, 1LD+2H5+0AD, 1LD+2H5+0AE, 1LD+2H5+0AF, 1LD+2I0+0AD, 1LD+2I0+0AE, 1LD+2I0+0AF, 1LE+2H0+0AD, 1LE+2H0+0AE, 1LE+2H0+0AF, 1LE+2H5+0AD, 1LE+2H5+0AE, 1LE+2H5+0AF, 1LE+2I0+0AD, 1LE+2I0+0AE, 1LE+2I0+0AF, 1ZE+2H0+0AD, 1ZE+2H0+0AE, 1ZE+2H0+0AF, 1ZE+2H5+0AD, 1ZE+2H5+0AE, 1ZE+2H5+0AF, 1ZE+2I0+0AD, 1ZE+2I0+0AE, 1ZE+2I0+0AF, 1ZK+2H0+0AD, 1ZK+2H0+0AE, 1ZK+2H0+0AF, 1ZK+2H5+0AD, 1ZK+2H5+0AE, 1ZK+2H5+0AF, 1ZK+2I0+0AD, 1ZK+2I0+0AE, 1ZK+2I0+0AF

• Fitting Position: Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 13.2
• Outer Diameter [mm]: 65.3
• Width 1 [mm]: 28
• Width 2 [mm]: 50
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Rear Axle, Lower, Front
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.2
• Width 1 [mm]: 45
• Width 2 [mm]: 64
• SVHC: No SVHC present!
• Manufacturer: FAG

Name: TULEJA WAH. VW T. A3 (8V1, 8VK) —REDNICA 12,3X60,2 SZEROKOS 45/64

• Fitting Position: Front Axle, inner, Front, Lower
• Height 1 [mm]: 54
• Height 2 [mm]: 33
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Manufacturer: KAVO

• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with fastening material
• Name: SW 33 10 2842
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 37
• Length [mm]: 50
• Manufacturer: RTS

• Weight [kg]: 0.342
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Weight [kg]: 0.18
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Diameter 1 [mm]: 12.1
• Diameter 2 [mm]: 60.3
• Length [mm]: 63.8
• Manufacturer: RTS

• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with fastening material
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.087
• Manufacturer: RTS

• Model Year from: 2020
• Fitting Position: Rear, Lower Front Axle
• Weight [kg]: 0.22
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 4.9
• Manufacturer: FEBEST

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Material: Rubber/Metal
• Fitting Position: Front, Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.346
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Height [mm]: 50
• Name: ALT 88894AL
• Manufacturer: ALTE AUTOMOTIVE

• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.8
• Length [mm]: 50
• paired article number: 271402
• Weight [kg]: 0.34
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: Rear Axle, both sides, Rear
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Weight [kg]: 0.26
• Fitting Position: Front Axle both sides, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.7
• Length [mm]: 50
• Manufacturer: RTS

• Fitting Position: Rear Axle, in front of axle
• Axle: Multi-link Axle
• for PR number: 0N4
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 64
• Inner Diameter 2 [mm]: 12
• Outer Diameter 2 [mm]: 60
• Thickness 2 [mm]: 45
• Name: DE TD1785W
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Front Axle Right, Rear
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, both sides, Rear
• Control/Trailing Arm Type: Control Arm
• Required quantity: 2
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.36
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Weight [kg]: 0.408
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 72
• Length [mm]: 94.2
• Manufacturer: RTS