Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of circuits: 4
- Length [mm]: 526
- Oxygen Sensor: Diagnostic Probe
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Manufacturer: KAMOKA
- Oxygen Sensor: Diagnostic Probe
-
Fabrication Number: ESL-
SK- 004 - Cable Length [mm]: 545
- Manufacturer: NTY
-
Engine Code: AUB,
BBZ -
Oxygen Sensor: Diagnostic Probe,
Heated - Number of circuits: 4
- Length [mm]: 526
- Name: Lambda andur
- Manufacturer: MAX
- Oxygen Sensor: Diagnostic Probe
- Cable Length [mm]: 650
- Guarantee: 3 years guarantee
- Weight [kg]: 0.14
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN
Fitting Position: after catalytic converter, before catalytic converter
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.14
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV904
- Manufacturer: ESEN SKV
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Cable Length [mm]: 650
- Guarantee: 3 years guarantee
- Weight [kg]: 0.13
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN
-
Oxygen Sensor: Diagnostic Probe,
Finger probe - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0119 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"
- Number of circuits: 4
- Conductor Number: 4
- Length [mm]: 575
- Resistor [Ohm]: 2.1
- Cable Length [mm]: 575
- Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
-
Oxygen Sensor: Diagnostic Probe,
Oxygen Sensor -
Engine Code: AUB,
BBZ - Voltage [V]: 12
- Length [mm]: 620
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.11
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV029
- Length [mm]: 550
- Number of circuits: 4
- Resistor [Ohm]: 4.5
- Conductor Number: 4
- Cable Length [mm]: 550
- Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
-
Oxygen Sensor: Regulating Probe,
Diagnostic Probe - Overall Length [mm]: 700
- Number of circuits: 4
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Name: HU 135330
- Manufacturer: HITACHI
- Fitting Position: after catalytic converter
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 520
- Weight [kg]: 0.1
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AUB
- Fitting Position: after catalytic converter
- Length [mm]: 526
- Cable Length [mm]: 570
- Conductor Number: 4
- Supplementary Article/Info 2: with fastening material
- Available as universal article as well, see article no.: 10.7007
- Number of circuits: 4
- Manufacturer: FACET
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
- Engine Code: AUB
- Fitting Position: after catalytic converter
- Length [mm]: 526
- Cable Length [mm]: 570
- Conductor Number: 4
- Supplementary Article/Info 2: with fastening material
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: EP 1.997.600
- Manufacturer: EPS
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
- Oxygen Sensor: Diagnostic Probe
- Length [mm]: 650
- Number of pins: 4
- Technical Information Number: Universal 77004
- Socket colour: black
- Manufacturer: FAE
-
Oxygen Sensor: Diagnostic Probe,
Heated - Number of pins: 4
- Cable Length [mm]: 500
- Quality: OE EQUIVALENT
- for OE number: 466016355034
- Manufacturer: MEAT & DORIA
- Fitting Position: after catalytic converter
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 520
- Weight [kg]: 0.1
- Name: SW 30 93 6892
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 290
- Alternatively:
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Manufacturer: ERA
- Oxygen Sensor: Heated
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Number of pins: 4
- General Information: lambda probe; 4 wire
- Manufacturer: VIKA
- Construction Year to: 05.2002
- Engine Code: AUB
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Oxygen Sensor: Planar probe,
Heated, Thread pre- greased - Supplementary Article/Info 2: without plug
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Length [mm]: 535
- Number of circuits: 5
-
Oxygen Sensor: Thread pre-
greased -
Fabrication Number: ESL-
SK- 003 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 650
- Name: LAMBDA ANDUR
- Manufacturer: DLP
-
Lisainfo: ES20270-
12B1 -
Additional information: ES20270-
12B1
-
Line insulation design: with silicone-
coated woven- fibre insulation - Socket colour: brown
- for OE number: 036 906 262 F
- Length [mm]: 580
- Weight [kg]: 0.148
-
Thread Size: M18 x 1,
5 - Connector Shape: D Shape
- Cable Length [mm]: 570
- Number of pins: 4
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Fitting Position: after catalytic converter
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Line insulation design: with silicone-
coated woven- fibre insulation - Socket colour: black
- Number of circuits: 4
- Cable Length [mm]: 540
- Connector Shape: D Shape
- Weight [kg]: 0.166
- for OE number: 06A 906 265 AP
-
Thread Size: M18 x 1,
5 - Length [mm]: 680
- Number of pins: 4
- Fitting Position: before catalytic converter
- Manufacturer: VEMO GERMANY
Oxygen Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Connector Shape: D Shape
- for OE number: 03D 906 265 B
- Weight [kg]: 0.15
-
Thread Size: M18 x 1,
5 - Socket colour: black
- Number of circuits: 4
- Length [mm]: 650
- Number of pins: 4
- Number of connectors: 4
- Fitting Position: before catalytic converter
- Manufacturer: VEMO GERMANY
Oxygen Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 036906262D
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 530
- Number of pins: 4
- Weight [g]: 108
- Gross Weight [g]: 139
- Manufacturer: DENSO
- Quality class: Q
- Name: Lambda sensor
Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor
- Oxygen Sensor: Heated
- Manufacturer: MAGNETI MARELLI
-
Vehicle Identification Number (VIN) from: 6L-
2- 000 001 -
Engine Code: AUB,
BBZ - Fitting Position: after catalytic converter
- Block Separation:
- Oxygen Sensor: Heated
- Voltage [V]: 12
- Conductor Number: 4
- Cable Length [mm]: 700
- Name: LAMBDA ANDUR
- Manufacturer: PIE
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Thread Size: M18 x 1,
5 - Length [mm]: 530
- Connector Shape: D Shape
- Conductor Number: 4
- Cable Length [mm]: 530
- Number of pins: 4
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Fitting Position: after catalytic converter
- Weight [kg]: 0.146
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AUB,
BBZ -
Oxygen Sensor: Regulating Probe,
Broadband oxygen sensor - Number of circuits: 5
- Length [mm]: 535
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor -
Engine Code: AUB,
BBZ - Voltage [V]: 12
- Colour: blue
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.11
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV906
- Manufacturer: ESEN SKV
- Oxygen Sensor: Heated
- General Information: lambda probe; 5 wire
- Manufacturer: VIKA
- Oxygen Sensor: Heated
- General Information: lambda probe; 5 wire
- Manufacturer: VIKA
-
Oxygen Sensor: Regulating Probe,
Broadband oxygen sensor - Fitting Position: Exhaust Manifold
- Number of pins: 5
- Connector Shape: D Shape
- Cable Length [mm]: 680
- for article number: 81095E
- Quality: OE EQUIVALENT
- for OE number: 036906262E
- Manufacturer: MEAT&DORIA
- Oxygen Sensor: Heated
- Number of pins: 4
- Cable Length [mm]: 580
- for article number: 81707
- for OE number: 466016355265
- Manufacturer: MEAT&DORIA
-
Oxygen Sensor: Regulating Probe,
Broadband oxygen sensor - Fitting Position: before catalytic converter
- Cable Length [mm]: 600
- Number of pins: 6
- Socket colour: black
- Manufacturer: FAE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks