Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
-
Shape: O-
Ring, round - Inner Diameter [mm]: 55
- Outer Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: MVQ
(silicone rubber) -
Name: TIHEND,
EGR- KLAPP - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: BMS
- Material: Stainless Steel
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Engine Code: BNV
- Material: Stainless Steel
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Fitting Position: Lower
- Gasket Design: Fibre Composite
- Chemical Properties: Asbestos Free
- Mounting Type: Flange mounting
- Number of flange connections: 2
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Shape: round
- Material: Rubber
-
Name: Tihend,
EGR- klapp - Manufacturer: MAX
-
Lisainfo: 70-
0130 -
Additional information: 70-
0130
- Engine Code: BNV
- Inner Diameter [mm]: 32
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Engine Code: BMS
- Manufacturer: ELRING
-
Kaal (kg): 0,
01 - Garantii: 3 aastat garantii
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Gasket Design: Steel
- Mounting Type: Flange mounting
- Flange Hole Diameter [mm]: 25
- Number of flange connections: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 5
- Inner Diameter [mm]: 32
- Manufacturer: ELRING
- Lisainfo: 729.970 ELR
- Additional information: 729.970 ELR
-
Engine Code: BNV,
BMS - Thickness [mm]: 0.4
- Inner Diameter [mm]: 46
- Outer Diameter [mm]: 76
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: AJU
- Additional information: AJU01112700
- Lisainfo: AJU01112700
- Engine Code: BNV
- Inner Diameter [mm]: 32
- Engine Code: BMS
- Fitting Position: Intake Manifold
- Quantity per packing unit: 50
- Inner Diameter [mm]: 60
- Outer Diameter [mm]: 66
- Thickness [mm]: 3
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring - Manufacturer: ELRING
- Weight [kg]: 0.007
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BNV
- Inner Diameter [mm]: 22
- Manufacturer: ELRING
- Engine Code: BMS
- Quantity per packing unit: 5
- Fitting Position: Throttle Housing
- Inner Diameter [mm]: 55
- Outer Diameter [mm]: 59
- Thickness [mm]: 4.6
-
Material: FPM
(fluoride rubber) - Shape: A Shape
- Colour: red
- Manufacturer: ELRING
for OE number: 03G 128 063 G, 03G 128 063 M, 03G 128 063 Q, 03L 128 063 AC, 03L 128 063 E, 03L 128 063 G, 03L 128 063 J, 03L 128 063 L, 03L 128 063 M, 03L 128 063 Q, 03L 128 063 R, A2C59512935, A2C59514304
- Engine Code: BMS
- Quantity per packing unit: 5
- Fitting Position: EGR valve at manifold
- Inner Diameter [mm]: 44
- Thickness [mm]: 2.6
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring - Alternatively:
- Weight [kg]: 0.004
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BNV
-
Supplementary Article/Supplementary Info: without gasket/
seal - Operating Mode: Pneumatic
- Manufacturer: KAMOKA
- Additional information: F19024
- Lisainfo: F19024
- Engine Code: BNV
- Quantity per packing unit: 5
- Fitting Position: Pipe at manifold
- Manufacturer: WAHLER
- Engine Code: BNV
- Operating Mode: Pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Lisainfo: EGR Valve
- Additional information: EGR Valve
- Rakendustüüp: pneumaatiline
-
Seerianumber: EGR-
SK- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Rakendustüüp: pneumaatiline
- Piirangutega toode/piirangu info: koos tihenditega
- Mudeliaasta alates: 1998
- Mudeliaasta kuni: 2010
- Uus osa:
- Vana detaili tagastus mittevajalik:
-
Manufacturer: ABAKUS DEPO/
LORO -
Additional information: 121-
01- 030 ABAK -
Lisainfo: 121-
01- 030 ABAK
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Name: EGR-
klapp - Manufacturer: MAG
- Rakendustüüp: pneumaatiline
- Manufacturer: ASHIKA
- Rakendustüüp: pneumaatiline
- Manufacturer: JAPKO
- Manufacturer: MAGNETI MARELLI
- Name: MM EV082
- Rakendustüüp: pneumaatiline
- Manufacturer: JAPKO
- Engine Code: BNV
- Rakendustüüp: pneumaatiline
- Piirangutega toode/piirangu info: koos tihendiga
- Quality class: PJ
- Name: Exhaust gas recirculation valve
- Rakendustüüp: pneumaatiline
- Manufacturer: DENCKERMANN FILTRY
- Engine Code: BNV
- Rakendustüüp: pneumaatiline
- Piirangutega toode/piirangu info: koos tihendiga
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Engine Code: BNV
- Valve type: Diaphragm Valve
- Operating Mode: Pneumatic
- Supplementary Article/Supplementary Info: with seal
-
Name: EGR-
klapp - Manufacturer: MAX
- Engine Code: BNV
- Supplementary Article/Supplementary Info: without EGR cooler
-
Name: EGR-
klapp - Manufacturer: NIS
Technical Information: FIRST FIT - Includes gaskets and O-rings when needed
- Engine Code: BNV
- Operating Mode: Pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: WAHLER
- Engine Code: BMS
-
Name: Toruhendus,
EGR- klapp - Manufacturer: DRM
- Operating Mode: Pneumatic
- Supplementary Article/Supplementary Info: with seal
- Packaging length [cm]: 13
- Packaging width [cm]: 10
- Packaging height [cm]: 10
- Weight [kg]: 0.402
-
for OE number: 045131501F,
045131501K - Valve type: Diaphragm Valve
- Manufacturer: AKSDASIS
-
Name: EGR-
klapp - Manufacturer: MAG
- Engine Code: BNV
- Quality class: PJ
- Name: Exhaust gas recirculation valve
- Operating Mode: Pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Packaging length [cm]: 19
- Packaging width [cm]: 19
- Packaging height [cm]: 18
-
for OE number: 038131501E,
045131501C, 045131501L - Valve type: Diaphragm Valve
- Weight [kg]: 0.74
- Manufacturer: AKSDASIS
- Engine Code: BNV
- Operating Mode: Pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Manufacturer: BORGWARNER
(WAHLER)
- Engine Code: BNV
- Operating Mode: Pneumatic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Quality: OE EQUIVALENT
-
Name: EGR-
klapp - Manufacturer: MD
- for OE number: 038 131 501 E
- Manufacturer: TRUCKTEC AUTOMOTIVE
- Engine Code: BMS
- Supplementary Article/Supplementary Info: without EGR cooler
-
Name: ZAWàR EGR VW 1,
4TDI/ 1, 9TDI/ 2, 0TDI - Manufacturer: NIS
Technical Information: FIRST FIT - Includes gaskets and O-rings when needed
- Operating Mode: Pneumatic
-
Name: EGR-
KLAPP - Manufacturer: JPA
- Engine Code: BNV
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Name: EGR-
klapp - Manufacturer: NRF
-
Piirangutega toode/piirangu info: ilma EGR-
jahutita, koos tihenditega - Rakendustüüp: elektriline
- Pistikkontaktide arv: 5
-
Seerianumber: EGR-
AU- 007 - Manufacturer: NTY
-
Name: NTY EGR-
AU- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: BMS
- Quantity per packing unit: 100
- Fitting Position: EGR valve at manifold
- Inner Diameter [mm]: 44
- Thickness [mm]: 2.6
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring
- Engine Code: BMS
- Operating Mode: Electric
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: JP GROUP
- Lisainfo: EGR Valve
- Additional information: EGR Valve
- Engine Code: BMS
- Valve type: Control Valve
- Operating Mode: Electric
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: with seal
-
Name: EGR-
klapp - Manufacturer: MAX
- Engine Code: BNV
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Operating Mode: Pneumatic
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Engine Code: BMS
- Operating Mode: Electric
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of connectors: 5
- Net weight [kg]: 0.7
-
Name: EGR-
KLAPP - Manufacturer: ELS
Price of the deposit will be added in the sum of 32.19€
- Rakendustüüp: elektriline
- Manufacturer: ASHIKA
- Engine Code: BMS
- Voltage [V]: 12
- Connector Shape: oval
- Number of pins: 5
- Operating Mode: Electric
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Name: EGR-
klapp - Manufacturer: NRF
- Rakendustüüp: elektriline
- Manufacturer: JAPKO
- Engine Code: BMS
- Rakendustüüp: elektriline
- Piirangutega toode/piirangu info: koos tihendiga
- Quality class: PJ
- Name: Exhaust gas recirculation valve
- Engine Code: BMS
- Rakendustüüp: elektriline
- Piirangutega toode/piirangu info: koos tihendiga
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 211121
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Engine Code: BMS
- Supplementary Article/Supplementary Info: with seal
- Operating Mode: Electric
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Pinge [V]: 12
- Rakendustüüp: elektriline
- Pistikkontaktide arv: 5
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
-
Kaal (kg): 0,
9 - Garantii: 3 aastat garantii
- Manufacturer: SKV GERMANY
- Name: CE 14SKV170
- Operating Mode: Electric
- Number of pins: 5
- Connector Shape: oval
- Observe the vehicle manufacturer specifications:
- New Part:
- Used part return not required:
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: BMS
- Manufacturer: DELPHI
-
Name: DE EG10427-
12B1
- Operating Mode: Electric
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Voltage [V]: 12
- Number of pins: 5
- Weight [kg]: 0.96
- Packaging length [cm]: 20
- Packaging width [cm]: 18
- Packaging height [cm]: 13
-
for OE number: 03G131502,
03G131501N, 03G131502B - Manufacturer: AKSDASIS
- Engine Code: BMS
- Number of connectors: 5
- Operating Mode: Electric
- Weight [kg]: 0.66
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BMS
- Valve type: Control Valve
- Operating Mode: Electric
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: with seal
-
Name: EGR-
KLAPP - Manufacturer: PIE
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
-
Kaal (kg): 2,
14 - Garantii: 3 aastat garantii
- Manufacturer: SKV GERMANY
- Name: CE 14SKV223
- Engine Code: BNV
- Valve type: Diaphragm Valve
- Operating Mode: Pneumatic
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: PIERBURG
- Pinge [V]: 12
- Rakendustüüp: elektriline
- valikuliselt:
- Piirangutega toode/piirangu info: koos tihenditega
- Ühenduste arv: 5
-
Kaal (kg): 0,
74 - alternatiivne remondikomplekt: 555192
- Tihendite arv: 1
- Manufacturer: ERA
- Engine Code: BMS
- Number of connectors: 5
- Operating Mode: Electric
- Weight [kg]: 0.66
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BMS
- Piirangutega toode/piirangu info: koos tihendiga
- Rakendustüüp: elektriline
- Manufacturer: METZGER
- Quantity per packing unit: 100
- Inner Diameter [mm]: 54.5
- Thickness [mm]: 3
-
Material: FPM
(fluoride rubber)
- Quantity per packing unit: 5
- Inner Diameter [mm]: 54.5
- Thickness [mm]: 3
-
Material: FPM
(fluoride rubber) - Alternatively:
-
Engine Code: BMS,
BNV - Quantity per packing unit: 100
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
-
Engine Code: BMS,
BNV - Quantity per packing unit: 5
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
- Alternatively: