• Construction Year from: 06.2008
• Fitting Position: Front Axle
• Sensor Type: Lever Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Manufacturer: JP GROUP
• Lisainfo: Sensor, Xenon light (headlight range adjustment)
• Additional information: Sensor, Xenon light (headlight range adjustment)

• Fitting Position: both sides
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Fabrication Number: ECX-PL-003
• Manufacturer: NTY
• Name: NTY ECX-PL-003

• Fitting Position: both sides
• Operating Mode: Electric
• Number of pins: 3
• Material: Polyamid 6
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles without headlight levelling (automatic) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Operating Mode: Electric
• Fitting Position: Left Front, Right Front
• Manufacturer Restriction: VALEO
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Number of connectors: 3
• Always compare old and new part (in particular OE No.):
• Name: CE 96SKV949
• Manufacturer: ESEN SKV

• Operating Mode: Electric
• Fitting Position: Right Front, Left Front
• Number of pins: 3
• Manufacturer Restriction: VALEO
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles without xenon light
• Operating Mode: Electric
• Version: V-System
• Manufacturer: TYC

• Name: Headlamp adjustment motor
• Quality class: PJ

Lisainfo: "Tootja: TYC
VECTRA C, 06-08
(kvaliteediklass: PJ)"

• Number of pins: 4
• Manufacturer: KAMOKA

Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Number of pins: 4
• for OE number: 1T0907503B
• Manufacturer: KAMOKA

• Number of pins: 4
• Supplementary Article/Supplementary Info: without holder
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Fitting Position: Front Axle
• Production date to: 26.05.2008
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder
• Housing material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: without coupling rod
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with headlight levelling
• Fabrication Number: ECX-VW-001
• Manufacturer: NTY
• Name: NTY ECX-VW-001

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Number of pins: 4
• Manufacturer: KAMOKA

• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV372
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Required quantity: 1
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with coupling rod, with holding frame
• Fabrication Number: ECX-VW-008
• Manufacturer: NTY
• Name: NTY ECX-VW-008

• Number of pins: 4
• Fabrication Number: ECX-VW-009
• Manufacturer: NTY
• Name: NTY ECX-VW-009

• Supplementary Article/Supplementary Info: with holder
• Fitting Position: Rear Axle
• Number of pins: 4
• Vehicle Equipment: for vehicles with headlight levelling
• Fabrication Number: ECX-VW-001A
• Manufacturer: NTY
• Name: NTY ECX-VW-001A

• Construction Year from: 06.2008
• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Fitting Position: Front Axle
• Fabrication Number: ECX-AU-020
• Manufacturer: NTY
• Name: NTY ECX-AU-020

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Fitting Position: Front Axle, Rear Axle, Front Axle Left
• Production date to: 26.05.2008
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Fitting Position: Front Axle
• Production date to: 26.05.2008
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder
• Housing material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: without coupling rod
• Manufacturer: ENERGY

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Number of pins: 4
• Supplementary Article/Supplementary Info: with holder
• Vehicle Equipment: for vehicles with headlight levelling
• Fabrication Number: ECX-VW-007
• Manufacturer: NTY
• Name: NTY ECX-VW-007

• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Gold-plated
• Socket Width [mm]: 1.6
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Vehicle Equipment: for vehicles without xenon light
• Number of connectors: 3
• Material: Plastic
• Operating Mode: Electric
• Weight [kg]: 0.05
• Name: SEADEELEMENT,TULEDE KORGUSE REGUL.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.29
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV438
• Manufacturer: ESEN SKV

• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV371
• Manufacturer: ESEN SKV

• Production date to: 26.05.2008
• Fitting Position: Front Axle
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV465

Supplementary Article/Info 2: with coupling rod, with holder, alternator regulator

• Number of pins: 4
• for OE number: 1K0941273L
• Vehicle Equipment: for vehicles with Xenon light
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV368

• Fitting Position: Front
• General Information: level sensor with poles; front
• Manufacturer: VIKA

• Number of pins: 4
• Vehicle Equipment: for vehicles with Xenon light
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Production date from: 27.05.2008
• Vehicle Identification Number (VIN) to: 5P-A-045000
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle, only fitted on one side
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Housing material: Plastic, GRP (Glass fibre Reinforced Plastic)
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Production date to: 26.05.2008
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6.6
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

• Number of pins: 4
• for OE number: 1K0 941 273 L
• Vehicle Equipment: for vehicles with Xenon light
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Drive Type: Front-Wheel Drive
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Production date from: 27.05.2008
• for PR number: 8Q3, 8Q6
• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Connector Shape: D Shape
• Manufacturer: ENERGY

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Drive Type: Front-Wheel Drive
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

• Production date to: 26.05.2008
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6.6
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 05.2008
• Fitting Position: Front Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV369
• Manufacturer: ESEN SKV

• Number of pins: 4
• for OE number: 1K0941274C
• Vehicle Equipment: for vehicles with Xenon light
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front
• General Information: level sensor with poles; front
• Manufacturer: VIKA

• Fitting Position: Rear
• General Information: level sensor with poles; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left
• Sensor Type: Lever Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear
• General Information: level sensor with poles; rear
• Manufacturer: VIKA

• Fitting Position: Front
• General Information: level sensor with poles; front
• Manufacturer: VIKA

• Fitting Position: Left Rear
• Number of connectors: 4
• Manufacturer: ERA

• Fitting Position: Front Axle, Rear Axle
• Production date to: 26.05.2008
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Supplementary Info: without rod assembly
• Supplementary Article/Info 2: without holding frame
• Connector Shape: D Shape
• Number of pins: 4
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) to: 5P-8-110 000
• Fitting Position: Front Axle
• Sensor Type: Lever Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Production date from: 27.05.2008
• for PR number: 8Q3, 8Q6
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with rod assembly
• Supplementary Article/Info 2: with holding frame
• Sensor Type: Lever Sensor
• Required quantity: 1
• Manufacturer: METZGER

• Fitting Position: Front
• Number of connectors: 6
• Manufacturer: ERA

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Supplementary Info: with rod assembly
• Supplementary Article/Info 2: with holding frame
• Sensor Type: Lever Sensor
• Required quantity: 1
• Manufacturer: METZGER

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Production date to: 26.05.2008
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with rod assembly
• Supplementary Article/Info 2: with holding frame
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Connector Shape: D Shape
• Manufacturer: VEMO

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.