Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: BMN
- Thickness [mm]: 4
- Inner Diameter [mm]: 32
- Colour: black
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.001
-
Name: RONGASTIHEND,
JAHUTUSVEDELIKU TORUSTIK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 25
- Thickness [mm]: 3.65
- Weight [kg]: 0.001
- Inner Diameter [mm]: 19.6
- Manufacturer: METALCAUCHO
- Engine Code: BMN
- Inner Diameter [mm]: 32
- Thickness [mm]: 4
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: METZGER
- Quantity per packing unit: 25
- Inner Diameter [mm]: 20.5
- Outer Diameter [mm]: 26.5
- Thickness [mm]: 5.5
- Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
-
Fabrication Number: CTM-
VW- 068 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Cooling Hose: from distributor to auxiliary water pump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
General Information: o-
ring - Manufacturer: BORSEHUNG
- Thickness [mm]: 5
- Width [mm]: 20.5
- Length [mm]: 26.5
-
Name: Rongastihend,
jahutusvedeliku torustik - Manufacturer: AJU
- for OE number: 1K0121157BM
- Weight [g]: 79
- Length [mm]: 201
- Name: Jahutusvoolik
- Manufacturer: IMP
- Engine Code: BMN
- Number of connectors: 3
- Material: Plastic
- for OE number: 1K0121087B
- Manufacturer: METZGER
- Material: Rubber
- General Information: coolant pipe; rubber
- Manufacturer: VIKA
-
Fabrication Number: CPP-
VW- 016 - Cooling Hose: from water pipe to oil cooler
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: BMN
- Forward- /Backflow: for foreflow
- Number of inlets/outlets: 2
- Cooling Hose: from EGR cooler to heat exchanger
- Manufacturer: METZGER
-
Fabrication Number: CPP-
VW- 029 - Manufacturer: NTY
-
Name: NTY CPP-
VW- 029
- Material: Iron
- Name: Jahutusvedeliku torustik
- Manufacturer: MAX
- for OE number: 1K0 121 156 DN
- Manufacturer: KAMOKA
- Fitting Position: Upper
- Transmission Type: Manual Transmission
- Engine Code: BMN
- Vehicle Equipment: for vehicles with underrun protection
- Colour: black
- Hose Length [mm]: 455
- Inner Diameter 1 [mm]: 30.5
- Inner Diameter 2 [mm]: 30.5
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
-
Fabrication Number: CTM-
VW- 126 - Transmission Type: Automatic Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Material: Iron
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- Engine Code: BMN
- Guarantee: 3 years guarantee
- Weight [kg]: 0.2
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 54SKV807
- Fitting Position: Lower
- Engine Code: BMN
- Vehicle Equipment: for vehicles without underrun protection
- Cooling Hose: from connecting pipe to engine cooler
- Colour: black
- Hose Length [mm]: 850
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 30
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- Transmission Type: Manual Transmission
-
for PR number: 1SA,
1SL -
Fitting Position: Lower Right,
Radiator - Observe system fill quantity:
- Hose Type: Moulded Hose
- Supplementary Article/Info 2: with protection hose
- Manufacturer: TOPRAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber with fabric lining General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Production date from: 03/
06 -
Production date to: 05/
09 - Cooling Hose: from expansion tank to engine cooler
- for OE number: 1K0122109CC
- Name: JAHUTUSVOOLIK
- Manufacturer: SAS
- Material: Plastic
- General Information: coolant pipe; plastic
- Manufacturer: VIKA
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- Weight [kg]: 0.48
- Fitting Position: Front Axle
- Material: Metal
- Manufacturer: 3RG
- Fitting Position: Front Axle
- Guarantee: 3 years guarantee
- Weight [kg]: 0.4
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 43SKV795
-
Production date from: 01/
07 -
Production date to: 12/
10 - Cooling Hose: from connecting pipe to engine cooler
- Fitting Position: Lower Left
- for OE number: 1K0121156DN
- Manufacturer: SASIC
- Fitting Position: Lower
- Transmission Type: Manual Transmission
- Engine Code: BMN
- Vehicle Equipment: for vehicles with underrun protection
- Colour: black
- Hose Length [mm]: 800
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 31
- Observe broschure:
-
Manufacturer: GATES-
PRZEWODY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Upper
- Weight [kg]: 0.45
- Weight [g]: 450
- Manufacturer: METALCAUCHO
- Production date from: 03.08.2009
- Cooling Hose: from coolant regulator housing to heat exchanger
- Number of inlets/outlets: 3
- Colour: black
-
Material: GRP
(Glass fibre Reinforced Plastic), PA 66 GF 30 -
Supplementary Article/Supplementary Info: with holder,
with gasket/ seal - Consult accessories list for recommended additional repairs:
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Lower
- Cooling Hose: from connecting pipe to engine cooler
- Manufacturer: METALCAUCHO
- Guarantee: 3 years guarantee
- Weight [kg]: 0.47
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Fitting Position: Upper
- Engine Code: BMN
- Vehicle Equipment: for vehicles without underrun protection
- Cooling Hose: from connecting pipe to engine cooler
- Colour: black
- Hose Length [mm]: 534
- Inner Diameter 1 [mm]: 41
- Inner Diameter 2 [mm]: 30
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material: Iron
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- for OE number: 03G121065AA
- Weight [g]: 470
- Name: IM 230197
- Manufacturer: ORIGINAL IMPERIUM
- Construction Year to: 08.2009
- Fitting Position: Upper
- Engine Code: CEGA
- Cooling Hose: from radiator to water pipe
- Colour: black
- Hose Length [mm]: 630
- Inner Diameter 1 [mm]: 30.5
- Inner Diameter 2 [mm]: 30.5
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Forward- /Backflow: Return Line
- Number of inlets/outlets: 4
- Surface: Painted
- Colour: black
- Material: Steel Pipe
-
Supplementary Article/Supplementary Info: with holder,
with gasket/ seal - Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- General Information: coolant pipe; plastic
- Manufacturer: VIKA
- Weight [kg]: 0.551
- Weight [g]: 551
- Manufacturer: METALCAUCHO
- for OE number: 1K0121156AF
- Fitting Position: Upper Left
- Material: Rubber
- Supplementary Article/Supplementary Info: with pipe socket
- Weight [g]: 410
- Length [mm]: 439
- Inner Diameter 1 [mm]: 41
- Inner Diameter 2 [mm]: 30
- Name: IM 220785
- Manufacturer: ORIGINAL IMPERIUM
- Engine Code: BMN
- Transmission Type: Manual Transmission
-
for PR number: 1SA,
1SL - Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower Right
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Engine Code: CEGA
- Production date to: 03.08.2009
- Cooling Hose: Piping to radiator
- Fitting Position: Upper Left
- Manufacturer: METZGER
- Production date to: 03.08.2009
- Cooling Hose: from heat exchanger to engine
- Number of inlets/outlets: 4
- Colour: black
-
Material: GRP
(Glass fibre Reinforced Plastic), PA 66 GF 30 -
Supplementary Article/Supplementary Info: with holder,
with gasket/ seal - Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- General Information: coolant pipe; plastic
- Manufacturer: VIKA
- Engine Code: CEGA
- Cooling Hose: from heat exchanger to auxiliary water pump
- Material: Metal
- Manufacturer: METZGER
- Construction Year from: 08.2009
- Fitting Position: Upper
- Engine Code: CEGA
- Cooling Hose: from radiator to water pipe
- Colour: black
- Hose Length [mm]: 610
- Inner Diameter 1 [mm]: 30
- Inner Diameter 2 [mm]: 31
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Engine Code: CFJA
- Cooling Hose: from engine to thermostat
- Material: Plastic
- Colour: black
- Pipe length [mm]: 550
- Inner Diameter 1 [mm]: 19
- Inner Diameter 2 [mm]: 16
- Observe broschure:
- Name: Jahutusvedeliku torustik
- Manufacturer: GAT
- Fitting Position: Lower
- Engine Code: CFJA
- Colour: black
- Hose Length [mm]: 768
- Inner Diameter 1 [mm]: 32.5
- Inner Diameter 2 [mm]: 30
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Construction Year to: 08.2009
- Engine Code: CEGA
- Cooling Hose: Expansion Tank to Engine
- Material: Plastic
- Colour: black
- Pipe length [mm]: 620
- Inner Diameter 1 [mm]: 20
- Inner Diameter 2 [mm]: 16
- Observe broschure:
- Manufacturer: GATES
- Construction Year from: 08.2009
- Engine Code: CEGA
- Cooling Hose: Engine to Valve
- Material: Plastic
- Colour: black
- Pipe length [mm]: 530
- Inner Diameter 1 [mm]: 17
- Inner Diameter 2 [mm]: 17
- Observe broschure:
- Manufacturer: GATES
- Engine Code: BMN
- Fitting Position: Water Pump
- Material: Metal
- Manufacturer: METZGER
- Engine Code: CEGA
- Production date from: 03.08.2009
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: METZGER
Cooling Hose: from distributor to engine cooler, from distributor to water pipe Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Vehicle Equipment: for vehicles without drive train protection
- Engine Code: BMN
- Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower Right
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Upper
- Transmission Type: Manual Transmission
- Engine Code: CFJA
- Colour: black
- Hose Length [mm]: 401
- Inner Diameter 1 [mm]: 34
- Inner Diameter 2 [mm]: 31
- Inner Diameter 3 [mm]: 14.5
- Inner Diameter 4 [mm]: 14.5
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Construction Year from: 08.2009
- Fitting Position: Lower
- Engine Code: CEGA
- Colour: black
- Hose Length [mm]: 880
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 31
- Inner Diameter 3 [mm]: 19
- Observe broschure:
-
Manufacturer: GATES-
PRZEWODY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Construction Year to: 08.2009
- Fitting Position: Lower
- Engine Code: CEGA
- Colour: black
- Hose Length [mm]: 710
- Inner Diameter 1 [mm]: 35
- Inner Diameter 2 [mm]: 33
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Upper
- Transmission Type: Automatic Transmission
- Engine Code: CFJA
- Colour: black
- Hose Length [mm]: 490
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 32
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks