Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
-
Manufacturer: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Material: Plastic
- Number of inlets/outlets: 3
- Shape: Y Shape
- Manufacturer: JP GROUP
- Quantity per packing unit: 100
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Plastic
- for OE number: 032121142
- Manufacturer: DELLO AUTOMEGA
- Quantity: 1
- Weight [kg]: 0.015
- Material: Plastic
- Required quantity: 1
- General Information: retaining spring
- Manufacturer: VIKA
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 32
- Thickness [mm]: 1.98
- Material: Steel
- Weight [kg]: 0.001
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Shape: T Shape
(T Piece) - Number of inlets/outlets: 3
- Angle [°]: 90
-
Material: GRP
(Glass fibre Reinforced Plastic) -
for pipe diameter [mm]: 32,
20 - for OE number: N 906 929 01
- Consult accessories list for recommended additional repairs:
-
Name: HENDUS-
/ JAGAJALLI, TORUSTIKUD - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for manufacturer number: 7920011
- Manufacturer: KAMOKA
- for manufacturer number: 7920045
- Manufacturer: KAMOKA
- General Information: distributor
- Manufacturer: VIKA
-
Material: GRP
(Glass fibre Reinforced Plastic) - for OE number: N 906 929 01
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- General Information: pipe union
- Manufacturer: VIKA
- General Information: pipe union
- Manufacturer: VIKA
- Weight [kg]: 0.051
- Required quantity: 1
- General Information: pipe union
- Manufacturer: VIKA
-
Shape: T Shape
(T Piece) - Number of inlets/outlets: 3
- Angle [°]: 90
-
Material: GRP
(Glass fibre Reinforced Plastic) - for pipe diameter [mm]: 20
- for OE number: N 907 606 01
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of inlets/outlets: 4
-
Material: GRP
(Glass fibre Reinforced Plastic) -
for pipe diameter [mm]: 10,
12, 20 - for OE number: 1K0 121 087P
- Consult accessories list for recommended additional repairs:
- Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Manufacturer: JP GROUP
- for manufacturer number: 7920123
- Manufacturer: KAMOKA
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Material: GRP
(Glass fibre Reinforced Plastic) - for OE number: 3B0 122 291B
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- for manufacturer number: 7920031
- Manufacturer: KAMOKA
- Housing material: Plastic
- Colour: black
- for OE number: 03C121118E
- Manufacturer: DELLO AUTOMEGA
-
Material: GRP
(Glass fibre Reinforced Plastic) - for OE number: 1K0 121 087B
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
- for OE number: 3B0 122 291B
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of inlets/outlets: 3
- Manufacturer: JP GROUP
- Lisainfo: Coolant Flange
- Additional information: Coolant Flange
- General Information: pipe union
- Manufacturer: VIKA
- Shape: Y Shape
- Number of inlets/outlets: 3
- Angle [°]: 45
-
Material: GRP
(Glass fibre Reinforced Plastic) - Length [mm]: 94
- for pipe diameter [mm]: 22
- for OE number: 5Q0 121 087L
- Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 1K0122291C
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 31
- Supplementary Article/Info 2: without thermostat
- Name: IM 90571
- Manufacturer: ORIGINAL IMPERIUM
- for manufacturer number: 7920112
- Manufacturer: KAMOKA
- Housing material: Plastic
- for OE number: 1K0122291BE
- Manufacturer: DELLO AUTOMEGA
- Construction Year from: 05.2013
- for OE number: 1K0 122 291 C
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
-
Fabrication Number: CTM-
VW- 074 - Manufacturer: NTY
- Housing material: Plastic
- Colour: black
- for OE number: 1K0122291R
- Manufacturer: DELLO AUTOMEGA
- for manufacturer number: 7920124
- Manufacturer: KAMOKA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
- for OE number: 1K0 122 291R
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: KRàCIEC UKADU CHODZENIA VAG
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Radiator
- Lisainfo: Coolant Flange
- Additional information: Coolant Flange
- General Information: pipe union
- Manufacturer: VIKA
- for OE number: 1J0 122 291
- Fitting Position: Radiator
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 32
- Diameter 3 [mm]: 20
- for OE number: N90692901
- Manufacturer: MEAT & DORIA
- Length [mm]: 59.2
- Weight [kg]: 0.025
- Inner Diameter [mm]: 29
- Manufacturer: METALCAUCHO
- Weight [g]: 26
- Material: Plastic
- for OE number: 3B0122291B
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 8.3
- Manufacturer: MOTORAD
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with fastening clamp
- General Information: pipe union
- Manufacturer: VIKA
-
Fitting Position: Radiator,
Upper - for OE number: 1J0121619
- Manufacturer: NRF
- Weight [kg]: 0.031
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Outer Diameter 1 [mm]: 8
- Inner Diameter 1 [mm]: 4
- Manufacturer: METALCAUCHO
- for manufacturer number: 7920155
- Manufacturer: KAMOKA
- for manufacturer number: 7920140
- Manufacturer: KAMOKA
- Shape: Y Shape
- Number of inlets/outlets: 3
- Angle [°]: 50
-
Material: GRP
(Glass fibre Reinforced Plastic) - Length [mm]: 60
- for pipe diameter [mm]: 8
- for OE number: 1K0 121 087B
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- General Information: pipe union
- Manufacturer: VIKA
- Diameter 1 [mm]: 20
- Diameter 2 [mm]: 36
- for OE number: 3B0122291B
- Manufacturer: MEAT & DORIA
- for OE number: 3B0122291B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 29
- Supplementary Article/Info 2: without thermostat
- Name: IM 90582
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Radiator,
Lower -
Manufacturer: JP GROUP A/
S - Lisainfo: Coolant Flange
- Additional information: Coolant Flange
- for OE number: 1K0122291R
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 37
- Supplementary Article/Info 2: without thermostat
- Name: IM 90584
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 1K0122291C
- Manufacturer: NRF
- General Information: pipe union
- Manufacturer: VIKA
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with sensor,
with fastening clamp - General Information: pipe union
- Manufacturer: VIKA
- Engine Code: CAXC
- Diameter 1 [mm]: 35
- Diameter 2 [mm]: 7
- Diameter 3 [mm]: 20
- for OE number: 1K0122291R
- Manufacturer: MEAT & DORIA
- General Information: pipe union
- Manufacturer: VIKA
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Fitting Position: Radiator,
Upper -
Material: GRP
(Glass fibre Reinforced Plastic) - for OE number: 1K0 122 291BE
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- for OE number: 1K0122291BE
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 55
- Supplementary Article/Info 2: without thermostat
- Name: IM 90614
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Radiator,
Upper - Supplementary Article/Info 2: with clip
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 1K0 122 291BE
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Consult accessories list for recommended additional repairs:
- Hose Diameter [mm]: 35
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.05
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 1K0122291AD
- Fitting Position: Lower
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 74
-
Supplementary Article/Info 2: without sensor,
without thermostat - Name: IM 90686
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Upper
- Weight [kg]: 0.051
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 05.2013
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Outer Diameter 1 [mm]: 8
- Inner Diameter 1 [mm]: 4
- Weight [kg]: 0.031
- for OE number: 1K0 122 291 C
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CAXC
- Name: EP 1.660.022
- Manufacturer: EPS
- Engine Code: CAXC
- Manufacturer: FACET
- Length [mm]: 59.2
- Inner Diameter [mm]: 29
- Weight [kg]: 0.025
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 3B0 122 291 B
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Radiator,
Lower - Supplementary Article/Info 2: with sensor
- Manufacturer: DELLO AUTOMEGA
- Length [mm]: 59.2
- Inner Diameter [mm]: 29
- Weight [kg]: 0.025
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 3B0 122 291 B
- Name: SW 30 10 3334
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 3B0 122 291 B
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Thermostat
-
Supplementary Article/Supplementary Info: without gasket/
seal - for OE number: 03C121118D
- Manufacturer: METZGER
-
Fitting Position: Radiator,
Lower -
Supplementary Article/Info 2: with sensor,
with clip - Alternative Repair Kit: 112 399
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Heating/Cooling: with thermal switch connector
- for OE number: 1K0 122 291AD
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 1K0122291BE
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks