• Fitting Position: Front Axle, inner, Lower, Front
• Hulgaühik: Tükk
• Laagritüüp: Kummi-metalllaager
• Netokaal [kg]: 0,13

• Installatsiooni pool: esisild alla, taga
• Lisainfo: Rubber mount for wishbone, front, rear
• Additional information: Rubber mount for wishbone, front, rear

• Quantity per packing unit: 100
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Siseläbimõõt [mm]: 16
• Välisläbimõõt [mm]: 17
• Installatsiooni pool: paremal, Esisild, vasakul
• Pikkus (mm): 50
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG

• Fitting Position: Front Axle, Front
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Lower, Lower Front Axle
• OE-numbri jaoks: 191 407 182
• Manufacturer: GSP

• Length [mm]: 54
• Fitting Position: Lower Front Axle, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle, Lower, Front
• Siseläbimõõt 1 [mm]: 12
• Välisläbimõõt 1 [mm]: 33
• Jämedus/Tugevus 1 (mm): 54
• Manufacturer: DELPHI

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Steel, Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36, 33
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Installatsiooni pool: esisild alla, ees
• Lisainfo: Rubber mount for wishbone, front, front
• Additional information: Rubber mount for wishbone, front, front

• OE-numbri jaoks: 191407182
• Installatsiooni pool: all, ees, Esisild
• vajaminev tükihulk: 2
• Materjal: Metall
• Kaal (g): 114
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33
• Pikkus (mm): 54
• Name: IM 32200
• Manufacturer: ORIGINAL IMPERIUM

• Jämedus/Tugevus (mm): 54
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33, 36
• Materjal: Kumm/metall, Metall
• Installatsiooni pool: esisild vasakul, ees, esisild paremal
• Kaal (kg): 0,11
• Name: SW 30 69 0002
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Jämedus/Tugevus (mm): 54
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33, 36
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, ees, esisild paremal
• Kaal (kg): 0,1
• Manufacturer: FEBI BILSTEIN

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Quantity per packing unit: 10
• Sillamõõtmine pärast paigaldust vajalik:
• Installatsiooni pool: kahepoolne, ees, esisild alla
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• Kaal (kg): 0,121
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Height [mm]: 54
• Name: ALT 80941AL
• Manufacturer: ALTE AUTOMOTIVE

• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Installatsiooni pool: esisild vasakul, esisild paremal, all, ees, sees
• Pikkus (mm): 54
• Siseläbimõõt [mm]: 12
• Hulk telje kohta: 2
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Fitting Position: Front Axle both sides, Front
• Required quantity: 2
• paaris tootenumbrid: VKDS 331002
• Name: SK VKDS331002
• Manufacturer: SKF

• Fitting Position: Lower Front Axle, Rear
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• SVHC: SVHS aineid ei esine
• Name: LU 829008910
• Manufacturer: FAG

• Fitting Position: Front
• General Information: bonded rubber bush; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle, Front
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 32,5
• Laius (mm): 55
• SVHC: SVHS aineid ei esine
• Name: LU 829009210
• Manufacturer: FAG

• Siseläbimõõt [mm]: 12,1
• Välisläbimõõt [mm]: 32,4
• Pikkus (mm): 54
• paaris tootenumbrid: 270315
• Kaal (kg): 0,09
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, inner, Lower

• Fitting Position: Lower Front Axle, Rear
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle, Front
• Installatsiooni pool: kahepoolne, sees, ees, Esisild
• Kaal (kg): 0,1
• vajaminev tükihulk: 2
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• pakendi pikkus [cm]: 11
• pakendi laius [cm]: 6
• pakendi kõrgus [cm]: 6
• Manufacturer: MONROE

• Installatsiooni pool: esisild alla, taga
• Siseläbimõõt [mm]: 12
• Lisainfo: Rubber mount for wishbone, ®12 mm inner tube
• Additional information: Rubber mount for wishbone, ®12 mm inner tube

• uus mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 27
• Materjal: Kumm/metall, Alumiinium
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Kaal (kg): 0,6
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Name: SW 30 75 0002
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 4
• Roolimisliik: õõtshoova jaoks
• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: kahepoolne, taga, esisild alla
• Sillamõõtmine pärast paigaldust vajalik:
• paaris tootenumbrid: V10-1382
• Kaal (kg): 0,171
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild alla, taga
• Siseläbimõõt [mm]: 17
• Lisainfo: Rubber mount for wishbone, front ®17 mm inner tube
• Additional information: Rubber mount for wishbone, front ®17 mm inner tube

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle both sides, Lower, Front
• Inner Diameter [mm]: 12.2
• Length [mm]: 54
• Weight [kg]: 0.11
• Manufacturer: RTS

• vajaminev tükihulk: 2
• Kaal (kg): 0,217
• Installatsiooni pool: taga, esisild alla, kahepoolne
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60
• Name: TG 00721010
• Manufacturer: TEDGUM

• uus mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 27
• Materjal: Kumm/metall, Alumiinium
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Kaal (kg): 0,142
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Manufacturer: FEBI BILSTEIN

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• uus mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 27
• Materjal: Alumiinium, Kumm/metall
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Kaal (kg): 0,203
• Name: SW 30 69 0001
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vana mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Välisläbimõõt 1 [mm]: 60
• Välisläbimõõt 2 [mm]: 69
• Kaal (kg): 0,203
• Name: SW 30 69 0003
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vana mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 69, 60
• Materjal: Kumm/metall
• Installatsiooni pool: all, esisild vasakul, taga, esisild paremal
• Kaal (kg): 0,6
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Name: SW 30 75 0001
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.13
• Name: DY 37-06015-6
• Manufacturer: DYS

• vana mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Välisläbimõõt 1 [mm]: 60
• Välisläbimõõt 2 [mm]: 69
• Kaal (kg): 0,202
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear, Lower
• Siseläbimõõt 1 [mm]: 17
• Välisläbimõõt 1 [mm]: 61
• Jämedus/Tugevus 1 (mm): 41
• Manufacturer: DELPHI
• Name: DE TD243W

• uus mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 27
• Materjal: Alumiinium, Kumm/metall
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Kaal (kg): 0,141
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Aluminium
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild, kahepoolne, ees
• Roolimisliik: õõtshoova jaoks
• Laagritüüp: Kummi-metalllaager
• Hulk telje kohta: 2
• soovitava lisavarustuse artiklinumber: 44090 01, 44091 01
• Hooldusinfot jälgida:
• Manufacturer: LEMFÖRDER

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)"

• vana mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 69, 60
• Materjal: Kumm/metall
• Installatsiooni pool: all, esisild vasakul, taga, esisild paremal
• Kaal (kg): 0,198
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Manufacturer: FEBI BILSTEIN

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal, all
• Name: DA DSS1333
• Manufacturer: DAYCO

• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60,1
• Pikkus (mm): 41
• paaris tootenumbrid: 270314
• Kaal (kg): 0,14
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, inner, Lower

• Siseläbimõõt [mm]: 16
• Välisläbimõõt [mm]: 60,2
• tugevdatud variant:
• Kaal (kg): 0,25
• vajaminev tükihulk: 2
• Installatsiooni pool: taga, esisild alla
• Manufacturer: TEDGUM_TD

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Height [mm]: 41
• Name: ALT 80968AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle both sides, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Length [mm]: 41
• Weight [kg]: 0.15
• Manufacturer: RTS

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush - kit left=right

• Installatsiooni pool: Esisild, kahepoolne, taga
• Roolimisliik: õõtshoova jaoks
• Hulk telje kohta: 2
• Name: LMI 1020502
• Manufacturer: LEMFÖRDER

• Quantity per packing unit: 10
• Roolimisliik: õõtshoova jaoks
• Installatsiooni pool: taga, Esisild
• Sillamõõtmine pärast paigaldust vajalik:
• Laagritüüp: Kummi-metalllaager
• Kaal (kg): 0,265
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: all, Esisild, kahepoolne, taga
• Välisläbimõõt [mm]: 60
• Kõrgus 1 (mm): 25
• Kõrgus 2 (mm): 41
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Rear
• Installatsiooni pool: kahepoolne, taga, sees, Esisild
• Läbimõõt [mm]: 17
• Laius (mm): 60
• Kõrgus (mm): 41
• Kaal (kg): 0,2
• vajaminev tükihulk: 2
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• pakendi pikkus [cm]: 11
• pakendi laius [cm]: 6
• pakendi kõrgus [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Lower Front Axle, Rear, both sides
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: Õõtshoob
• Pikkus (mm): 41
• Välisläbimõõt [mm]: 60
• Siseläbimõõt [mm]: 17
• Hulk telje kohta: 2
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Fitting Position: Rear, Front Axle both sides, Lower
• Required quantity: 2
• paaris tootenumbrid: VKDS 331011
• Name: SK VKDS331011
• Manufacturer: SKF

• Fitting Position: Lower Front Axle, Rear, both sides
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Hulk telje kohta: 2
• Manufacturer: TRW

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.09
• Name: DY 37-22817
• Manufacturer: DYS

• Installatsiooni pool: Tagasild
• Kaal (g): 375
• Name: IM 1738
• Manufacturer: ORIGINAL IMPERIUM

• Siseläbimõõt [mm]: 12
• Installatsiooni pool: kahepoolne, ees, esisild alla
• vajaminev tükihulk: 2
• Kaal (kg): 0,082
• Shore-A tugevuskarakteristik, lähteühend: 80
• Värv: punane
• Materjal: PU (Polyurethan)
• Piirangutega toode/piirangu info 2: koos rasvakattega
• Välisläbimõõt [mm]: 32
• Name: TG TED94751
• Manufacturer: TEDGUM