• Fitting Position: Front Axle, inner, Lower, Front
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.13
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: NK

• Fitting Position: Lower Front Axle, Rear
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, rear
• Additional information: Rubber mount for wishbone, front, rear

• Quantity per packing unit: 100
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 17
• Fitting Position: Right, Front Axle, Left
• Length [mm]: 50
• SVHC: No SVHC present!
• Manufacturer: FAG

• Required quantity: 1
• Manufacturer Restriction: pro Querlenker
• Height [mm]: 50
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 17
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle Right, Front Axle Left
• Length [mm]: 50
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 17
• Material: Steel
• Required quantity: 2
• Name: Puks - K„„ndmik VW P. USTALAJ¤CA
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right, Front, Lower
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33, 36
• Manufacturer: MERTZ

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Lower, Lower Front Axle
• for OE number: 191 407 182
• Manufacturer: GSP

• Length [mm]: 54
• Fitting Position: Lower Front Axle, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: MAX

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 33
• Thickness 1 [mm]: 54
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Front Axle Right, Front, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 32
• Inner Diameter [mm]: 12
• Width [mm]: 28
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Steel, Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36, 33
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• for OE number: 357407182
• Manufacturer: SASIC

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33, 36
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front, Front Axle Right
• Weight [kg]: 0.1
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, Front
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, front
• Additional information: Rubber mount for wishbone, front, front

• Quantity: 2
• Fitting Position: Front
• General Information: bonded rubber bush; front; small
• Manufacturer: VIKA

• Quantity per packing unit: 4
• Fitting Position: Lower Front Axle
• Length [mm]: 54
• Weight [kg]: 0.105
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 105
• Manufacturer: METALCAUCHO

• for OE number: 191407182
• Fitting Position: Lower, Front, Front Axle
• Required quantity: 2
• Material: Metal
• Weight [g]: 113
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Length [mm]: 54
• Name: IM 32200
• Manufacturer: ORIGINAL IMPERIUM

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33, 36
• Material: Rubber/Metal, Metal
• Fitting Position: Front Axle Left, Front, Front Axle Right
• Weight [kg]: 0.11
• Name: SW 30 69 0002
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Length [mm]: 54
• Inner Diameter [mm]: 12
• Quantity per axle: 2
• Manufacturer: TRW

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower, Front Axle, both sides, Front
• Outer Diameter 1 [mm]: 33
• Outer Diameter 2 [mm]: 36
• Height [mm]: 54
• Manufacturer: KAMOKA

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Quantity per packing unit: 10
• Axle alignment required after fitting:
• Fitting Position: both sides, Front, Lower Front Axle
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.121
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Height [mm]: 54
• Name: ALT 80941AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32.5
• Width [mm]: 55
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Front Axle both sides, Front
• Required quantity: 2
• paired article number: VKDS 331002
• Manufacturer: SKF
• Name: SK VKDS331002

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF 84-/PASSAT 88-97
• Manufacturer: MEY

• Fitting Position: Front
• General Information: bonded rubber bush; front
• Manufacturer: BORSEHUNG

• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 32.4
• Length [mm]: 54
• paired article number: 270315
• Weight [kg]: 0.09
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Right, Front Axle Left, inner, Lower

• Fitting Position: Lower Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: DELLO AUTOMEGA

• new version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Material: Rubber/Metal, Aluminium
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.142
• Supplementary Article/Info 2: with mounting sleeve
• Name: Puks - K„„ndmik VW P. GOLF 2
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: both sides, Rear, Lower Front Axle
• Inner Diameter [mm]: 17
• Weight [kg]: 0.217
• Outer Diameter [mm]: 60
• Required quantity: 2
• Name: Puks - K„„ndmik VW P. GOLF/POLO/PA
• Manufacturer: TED

• Fitting Position: Front Axle, Front
• Weight [kg]: 0.1
• Required quantity: 2
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Front Axle Left, Front Axle Right, Rear, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Version: B
• Quantity per axle: 2
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 17
• Width [mm]: 24
• for OE number: 191 407 181E
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear, Right, Left, Front Axle
• Control/Trailing Arm Type: for control arm
• Total Length [mm]: 41
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 17
• Weight [kg]: 0.16
• Manufacturer: CORTECO

• Fitting Position: Lower Front Axle, Rear
• Inner Diameter [mm]: 12
• Lisainfo: Rubber mount for wishbone, ®12 mm inner tube
• Additional information: Rubber mount for wishbone, ®12 mm inner tube

• new version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Material: Rubber/Metal, Aluminium
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.6
• Supplementary Article/Info 2: with mounting sleeve
• Name: SW 30 75 0002
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 4
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Fitting Position: both sides, Rear, Lower Front Axle
• Axle alignment required after fitting:
• paired article number: V10-1382
• Weight [kg]: 0.171
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• old version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 69
• Weight [kg]: 0.202
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF 2 TY (Z KONIERZEM)
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, Rear
• Inner Diameter [mm]: 17
• Lisainfo: Rubber mount for wishbone, front ®17 mm inner tube
• Additional information: Rubber mount for wishbone, front ®17 mm inner tube

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle both sides, Lower, Front
• Inner Diameter [mm]: 12.2
• Length [mm]: 54
• Weight [kg]: 0.11
• Manufacturer: RTS

• new version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Material: Aluminium, Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.141
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• old version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 69, 60
• Material: Rubber/Metal
• Fitting Position: Lower, Front Axle Left, Rear, Front Axle Right
• Weight [kg]: 0.198
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - K„„ndmik VW P. GOLF 2 Z KONIERZEM KPL Z TULEJK¤ USTALAJ¤C¤

• old version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 69
• Weight [kg]: 0.203
• Name: SW 30 69 0003
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• new version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Material: Aluminium, Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.203
• Name: SW 30 69 0001
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Aluminium, Rubber/Metal
• Fitting Position: Front Axle, Lower, Rear
• Observe service information:
• Outer Diameter [mm]: 60, 27
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: MAX

• Material: Rubber/Metal
• Fitting Position: Front Axle, Lower, Rear
• Observe service information:
• Outer Diameter [mm]: 69, 60
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Name: Puks - K„„ndmik VW P. GOLF 2
• Manufacturer: MAX

• old version:
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 69, 60
• Material: Rubber/Metal
• Fitting Position: Lower, Front Axle Left, Rear, Front Axle Right
• Weight [kg]: 0.6
• Supplementary Article/Info 2: with mounting sleeve
• Name: SW 30 75 0001
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.13
• Name: DY 37-06015-6
• Manufacturer: DYS

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Article number of recommended accessories: 44090 01, 44091 01
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF/PASSAT
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter 1 [mm]: 17
• Outer Diameter 1 [mm]: 61
• Thickness 1 [mm]: 41
• Manufacturer: DELPHI
• Name: DE TD243W

• Fitting Position: Front Axle, inner, Lower, behind the axle
• Quantity Unit: Piece
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.17
• Manufacturer: NK

Name: Puks - K„„ndmik VW P. GOLF/PAS !!!Z TULEJ¤ USTALAJ¤C¤!!!

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Aluminium
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Quantity per packing unit: 4
• Fitting Position: Lower Front Axle
• Thickness [mm]: 41
• Observe service information:
• Weight [kg]: 0.155
• Required quantity: 2
• Material: Aluminium, Rubber/Metal
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 27, 60
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 155
• Manufacturer: METALCAUCHO

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)"

• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Material: Aluminium
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: DA DSS1333
• Manufacturer: DAYCO

• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60.1
• Length [mm]: 41
• paired article number: 270314
• Weight [kg]: 0.14
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, inner, Lower

• Fitting Position: Front, Lower Front Axle
• Weight [kg]: 0.189
• Packaging length [cm]: 5.5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• for OE number: 357 407 181
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Lower Front Axle, Rear
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 60.2
• reinforced version:
• Weight [kg]: 0.25
• Required quantity: 2
• Manufacturer: TEDGUM_TD

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Height [mm]: 41
• Name: ALT 80968AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower Front Axle, Rear, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 41
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 17
• Quantity per axle: 2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, both sides, Rear
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Name: Puks - K„„ndmik VW P. GOLF/PASSAT
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle both sides, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Length [mm]: 41
• Weight [kg]: 0.15
• Manufacturer: RTS

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush - kit left=right

• Fitting Position: Front Axle Right, Front Axle Left, Lower, Rear
• Height [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Material: Aluminium
• Supplementary Article/Supplementary Info: without holder
• Quantity Unit: Set
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF 2
• Manufacturer: MEY

• Fitting Position: Lower, Front Axle, both sides, Rear
• Outer Diameter [mm]: 60
• Height 1 [mm]: 25
• Height 2 [mm]: 41
• Manufacturer: KAMOKA

• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Supplementary Article/Supplementary Info: without holder
• Quantity Unit: Set
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Puks - K„„ndmik VW P. GOLF 2 KPL Z TULEJK¤ USTALAJ¤C¤