• Quantity per packing unit: 10
• Inner Diameter [mm]: 28.5
• Sealing Ring Diameter [mm]: 28.5
• Thickness [mm]: 3.8
• Shape: O-Ring
• Name: RONGASTIHEND
• Manufacturer: HAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Name: Radiator
• Quality class: ZJ

Lisainfo: OCTAVIA 04- (kvaliteediklass ZJ)

• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 415
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Name: Radiaator,mootorijahutus
• Manufacturer: NIS
• Lisainfo: AUDI A 3 / S 3 (8P) (03-) 1.6 FSI
• Additional information: AUDI A 3 / S 3 (8P) (03-) 1.6 FSI

Installation Information: MultiFit - Nissens has combined multiple product designs into one part

• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 26
• Core Length [mm]: 648
• Core Width [mm]: 399
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Brazed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Name: NI 65277A
• Manufacturer: NISSENS
• Lisainfo: AUDI A 3 / S 3 (8P) (03-) 1.6 FSI
• Additional information: AUDI A 3 / S 3 (8P) (03-) 1.6 FSI

Installation Information: MultiFit - Nissens has combined multiple product designs into one part

• Quantity per packing unit: 10
• Thickness [mm]: 3.8
• Outer Diameter [mm]: 28.5
• Material: Rubber
• Weight [kg]: 0.006
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: blue
• Pressure [bar]: 1.4
• Material: Plastic
• Weight [kg]: 0.112
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Supplementary Article/Info 2: with seal ring
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 647*398*16
• Additional information: 647*398*16

• Core Length [mm]: 647
• Core Width [mm]: 406
• Core Depth [mm]: 26
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 85.6
• Packaging width [cm]: 50.8
• Packaging height [cm]: 11
• Weight [kg]: 2.402
• Manufacturer: AKSDASIS

• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 415
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Material: Aluminium
• Core Length [mm]: 415
• Core Width [mm]: 650
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: MAX

• Vehicle Equipment: for vehicles with/without air conditioning
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 415
• Core Width [mm]: 650
• Core Depth [mm]: 23
• Manufacturer: JPN

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 415
• Manufacturer: KAMOKA

• Core Length [mm]: 650
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 647*398*16
• Additional information: 647*398*16

• Name: Radiator
• Quality class: ZJ

Lisainfo: A3 03- (kvaliteediklass ZJ)

• Radiator type: Mechanically jointed cooling fins
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 415
• Inlet Ø [mm]: 33
• Outlet Ø [mm]: 33
• Manufacturer: TYC

• Core Width [mm]: 415
• Core Length [mm]: 650
• Core Depth [mm]: 23
• Material: Aluminium
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: without coolant regulator
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 4.06
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: VAL

• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 414
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 415
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Quantity: 1
• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• General Information: radiator; pipe enlarging
• Manufacturer: VIKA

• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 406
• Core Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Radiator type: Brazed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 650*396*24
• Additional information: 650*396*24

• Transmission Type: Manual Transmission, Automatic Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Core Length [mm]: 647
• Core Width [mm]: 398
• Core Depth [mm]: 16
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 83.5
• Packaging width [cm]: 53.5
• Packaging height [cm]: 11
• Weight [kg]: 2.5
• Manufacturer: AKSDASIS

• Name: Radiator
• Quality class: PJ

Lisainfo: "Tootja: KOYO
OCTAVIA 04-
(kvaliteediklass: PJ)"

• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 650
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Manufacturer: JPN

• Engine Code: BSE, BGU, BSF, CCSA
• Core Depth [mm]: 23
• Core Width [mm]: 414
• Core Length [mm]: 650
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Manufacturer: MAGNETI MARELLI
• Name: MM BM853

• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 406
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Manufacturer: NRF

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Core Depth [mm]: 22
• Core Length [mm]: 650
• Core Width [mm]: 410
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: OCTAVIA 04- (kvaliteediklass P) Additional information: OCTAVIA 04- (kvaliteediklass P)

• Name: Radiator
• Quality class: PJ

Lisainfo: "Tootja: KOYO
A3 03-
(kvaliteediklass: PJ)"

• New Part:
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 650
• Core Width [mm]: 416
• Core Depth [mm]: 23
• Water Tank Material (radiator): Plastic
• Vehicle Equipment: for vehicles with/without air conditioning
• Transmission Type: Automatic Transmission, Manual Transmission
• Packaging height [cm]: 11
• Net Weight [g]: 3,500
• Packaging width [cm]: 50.8
• Packaging length [cm]: 85.6
• Name: MH CR30001S
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 448
• Core Width [mm]: 648
• Core Depth [mm]: 32
• Manufacturer: JPN

• Engine Code: BGU
• Transmission Type: 5-Speed Manual Transmission
• Climate Zones: for hot climate zones
• Core Width [mm]: 414
• Core Length [mm]: 650
• Core Depth [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Name: MM BM1669
• Manufacturer: MAGNETI MARELLI

• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles with air conditioning
• Core Depth [mm]: 26
• Core Length [mm]: 650
• Core Width [mm]: 406
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: A3 03- (kvaliteediklass P) Additional information: A3 03- (kvaliteediklass P)

• Transmission Type: Manual-/optional automatic transmission
• for OE number: 1K0 121 251 P
• Vehicle Equipment: for vehicles with/without air conditioning
• Core Length [mm]: 650
• Core Width [mm]: 418
• Core Depth [mm]: 26
• Manufacturer: TRUCKTEC

• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 406
• Core Depth [mm]: 33
• Supplementary Article/Info 2: with seal ring
• Radiator type: Brazed cooling fins
• Manufacturer: NRF
• Lisainfo: 650*406*33
• Additional information: 650*406*33

• Engine Code: BSE, BSF
• Construction Year to: 03.2009
• Transmission Type: Manual Transmission
• for OE number: 1K0121251BR
• Weight [g]: 972
• Core Length [mm]: 650
• Core Width [mm]: 385
• Core Depth [mm]: 16
• Gross Weight [g]: 2,652
• alternative item: -
• Manufacturer: DENSO

• Vehicle Equipment: for vehicles with/without air conditioning
• Construction Year from: 10.2006
• Core Depth [mm]: 33
• Core Length [mm]: 650
• Core Width [mm]: 400
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: JETTA (kvaliteediklass P) Additional information: JETTA (kvaliteediklass P)

• Construction Year from: 11.2009
• Engine Code: BSF
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Core Width [mm]: 435
• Core Length [mm]: 653
• Core Depth [mm]: 33
• Material: Aluminium
• Heating/Cooling: for vehicles without oil cooler
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 4.83
• Name: VA 701664
• Manufacturer: VALEO

• Construction Year from: 11.2009
• Engine Code: BSE, BGU, BSF, CCSA
• Core Length [mm]: 648
• Core Depth [mm]: 32
• Core Width [mm]: 408
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Name: MM BM1573
• Manufacturer: MAGNETI MARELLI

• New Part:
• Radiator type: Brazed cooling fins
• Core Length [mm]: 648
• Core Width [mm]: 408
• Core Depth [mm]: 26
• Water Tank Material (radiator): Plastic
• Vehicle Equipment: for vehicles with/without air conditioning
• Transmission Type: Automatic Transmission, Manual Transmission
• Packaging height [cm]: 12.5
• Net Weight [g]: 2,889
• Packaging width [cm]: 49
• Packaging length [cm]: 83.5
• Name: MH CR30000S
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Core Length [mm]: 650
• Core Width [mm]: 415
• Core Depth [mm]: 30
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Radiator type: Brazed cooling fins
• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• General Information: radiator; lead welding
• Manufacturer: VIKA

• for OE number: 1K0121251AC
• Material: Aluminium
• Weight [g]: 4,120
• Frame Material: Plastic
• Core Length [mm]: 650
• Core Width [mm]: 385
• Core Depth [mm]: 25
• Gross Weight [g]: 5,800
• alternative item: -
• Manufacturer: DENSO

• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 626
• Core Width [mm]: 408
• Core Depth [mm]: 16
• Water Tank Material (radiator): Plastic
• Packaging width [cm]: 17
• Net Weight [g]: 2,300
• Packaging height [cm]: 57
• Packaging length [cm]: 84
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Transmission Type: Manual Transmission
• for OE number: 1K0121251DP
• Material: Aluminium
• Weight [g]: 3,620
• Frame Material: Plastic
• Core Length [mm]: 650
• Core Width [mm]: 430
• Core Depth [mm]: 28
• Gross Weight [g]: 5,300
• alternative item: -
• Manufacturer: DENSO

• New Part:
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 640
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Water Tank Material (radiator): Plastic
• Diameter 1 [mm]: 33
• Diameter 2 [mm]: 33
• Packaging width [cm]: 16.5
• Net Weight [g]: 2,027
• Packaging height [cm]: 61.5
• Packaging length [cm]: 89.5
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.