• Fitting Position: Front Axle, Left
• Manufacturer: GSP

• Fitting Position: Rear, Upper
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Construction Year from: 11.2009
• Engine Code: BSF
• Fitting Position: Upper
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Automatic Transmission
• Model Year from: 2007
• for combined PR number: T53+G1C
• Fitting Position: Rear
• Weight [kg]: 0.145
• Supplementary Article/Supplementary Info: without holder
• Packaging length [cm]: 13.2
• Packaging width [cm]: 5.2
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Left
• Manufacturer: GSP

• Fitting Position: Front Axle, Left
• Manufacturer: GSP

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper
• Outer Diameter [mm]: 91
• Manufacturer: MERTZ

• Fitting Position: Upper
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 91
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Lower
• for OE number: 1K0 199 867
• Manufacturer: KAMOKA

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear, Upper
• for OE number: 1K0 199 868 P
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Left
• for OE number: 1K0199868P
• Manufacturer: GSP

• Fitting Position: Upper, Lower
• Mounting Type: Rubber-Metal Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Inner Diameter [mm]: 15.5
• Required quantity: 1
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.232
• Fitting Position: Lower
• Outer Diameter [mm]: 91.8
• Manufacturer: TEDGUM
• Name: TG 00728427

• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 91.9
• Weight [kg]: 0.25
• Required quantity: 1
• Fitting Position: Upper
• Manufacturer: TEDGUM

• Fitting Position: Lower
• Mounting Type: Rubber-Metal Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Fitting Position: Upper
• Outer Diameter [mm]: 91
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: ZTP-VW-001E
• Manufacturer: NTY

• Fitting Position: Front Axle, Upper
• Width [mm]: 92
• Height [mm]: 36
• Manufacturer: FAST

• Fitting Position: Rear
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 92
• Manufacturer: 3RG

• Fitting Position: Rear, Upper
• Manufacturer: CORTECO
• Name: COC 80001310

• Fitting Position: Upper
• Required quantity: 1
• Weight [g]: 270
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 91
• Length [mm]: 36
• Manufacturer: IMP

Name: PODUSZKA SIL. AUDI A3, A4, Q3, TT, SEAT LEON, TOLEDO, SKODA OCTAVIA, SUPERB, YETI, VW CADDY, EOS, FOX, GOLF, PASSAT, SCIROCCO 08.97-12.22

• Fitting Position: Rear, Body side, Upper
• Manufacturer: DELPHI
• Name: DE TEM124

• Fitting Position: Rear, Lower
• Mounting Type: Rubber-Metal Mount
• Manufacturer: BGA

• Fitting Position: Lower
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.252
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Right
• for OE number: 1K0 199 855 AD
• Manufacturer: GSP

• Fitting Position: Right Front
• Weight [g]: 215
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 92
• Length [mm]: 34
• Name: IM 37379
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, Lower
• Width [mm]: 91
• Height [mm]: 36
• Inner Diameter [mm]: 15
• Manufacturer: FAST

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Net weight [kg]: 0.21
• Name: Paigutus,Mootor
• Manufacturer: NK

• Fitting Position: Lower, Body side, Rear
• Manufacturer: DELPHI
• Name: DE TEM122

• Fitting Position: Front Axle, Left
• for OE number: 1K0 199 855 AE
• Manufacturer: GSP

• Fitting Position: Rear, Upper
• for OE number: 1K0 199 868 A, 1K0 199 868 Q
• Name: PAIGUTUS,MOOTOR
• Manufacturer: LMI

• Fitting Position: Rear, Lower
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: Torque Support
• Required quantity: 1
• Quantity Unit: Piece
• paired article number: 100 199 0162
• Name: PAIGUTUS,ABIRAAM/AGREGAADITALA
• Manufacturer: MEY
• Lisainfo: 1001990161
• Additional information: 1001990161

• Fitting Position: Upper, Rear
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: Torque Support
• Required quantity: 1
• Quantity Unit: Piece
• paired article number: 100 199 0161
• Name: PAIGUTUS,ABIRAAM/AGREGAADITALA
• Manufacturer: MEY
• Lisainfo: 1001990162
• Additional information: 1001990162

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear
• Material: Rubber/Metal
• Manufacturer: MERTZ

• Fitting Position: Rear Axle
• General Information: bonded rubber bush; rear
• Manufacturer: BORSEHUNG

• Fitting Position: Rear, Lower
• Engine Code: BSF
• Manufacturer: CORTECO
• Name: COC 80001306

• Fitting Position: Left Rear, Upper, Right Rear, Lower
• Mounting Type: soft version
• Weight [g]: 234
• Shore-A hardness value, base body: 47
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 91
• Length [mm]: 36
• Name: IM 32421
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: CCSA, BSE, BSF
• Vehicle Identification Number (VIN) to: 5P-A-014155
• Block Separation:
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Length [mm]: 312
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

Transmission Type: 6-Speed Automatic Transmission, Automatic Transmission

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear
• Manufacturer: KAMOKA
• Additional information: 890246 NISS
• Lisainfo: 890246 NISS

• Fitting Position: Rear, Lower
• Transmission Type: Automatic Transmission
• Fabrication Number: ZPS-VW-020
• Manufacturer: NTY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear
• for OE number: 1K0 199 855 BA
• Manufacturer: KAMOKA

• Engine Code: CCSA, BSE, BSF
• Vehicle Identification Number (VIN) to: ******5P*A*014155
• Block Separation:
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.632
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

Transmission Type: 6-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BSE, BSF
• Transmission Type: Manual Transmission
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Rubber mount, engine support, rear
• Additional information: Rubber mount, engine support, rear

• Fitting Position: Left Front
• Supplementary Article/Info 2: with rubber mount
• Lisainfo: Rubber mount, engine support, left
• Additional information: Rubber mount, engine support, left

• Fitting Position: Right Front
• Supplementary Article/Info 2: with rubber mount
• Lisainfo: Rubber mount, engine support, right
• Additional information: Rubber mount, engine support, right

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Net weight [kg]: 0.55
• Name: Paigutus,Mootor
• Manufacturer: NK

• Fitting Position: Rear, Lower
• Transmission Type: Manual Transmission, 6-Speed Manual Transmission
• Fabrication Number: ZPS-VW-016
• Manufacturer: NTY

• Transmission Type: Manual Transmission
• Fitting Position: Lower, Rear
• Manufacturer: CORTECO
• Name: COC 80004247

• Fitting Position: Rear
• Weight [kg]: 0.576
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 576
• Manufacturer: METALCAUCHO

• Transmission Type: 6-Speed Automatic Transmission
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount, engine support, rear
• Additional information: Rubber mount, engine support, rear

• Engine Code: BSE, BSF, CCSA
• Vehicle Identification Number (VIN) to: 5P-A-014 155
• Block Separation:
• Fitting Position: Rear
• Weight [kg]: 0.59
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 590
• Manufacturer: METALCAUCHO

Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission

• Fitting Position: Lower
• for OE number: 1K0 199 867 A, 1K0 199 867 Q
• Name: PAIGUTUS,MOOTOR
• Manufacturer: LMI

• Transmission Type: 5-Speed Manual Transmission
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.676
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• General Information: pendulum support
• Manufacturer: BORSEHUNG

• for OE number: 1K0199855L
• Fitting Position: Rear
• Required quantity: 1
• Weight [g]: 606
• Name: IM 37274
• Manufacturer: ORIGINAL IMPERIUM
• Additional information: F37274
• Lisainfo: F37274

• Engine Code: BSF, BSE
• Transmission Type: Manual Transmission
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.581
• for OE number: 1K0 199 855 BA
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear
• Material: Rubber/Metal
• Manufacturer: FAST

• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.56
• Name: DY 71-22654
• Manufacturer: DYS

• for OE number: 1K0199855BA, 1K0199855K
• Fitting Position: Rear
• Material: Rubber/Metal
• Weight [g]: 579
• Inner Diameter [mm]: 10
• Manufacturer: IMP

Name: PODUSZKA SIL. AUDI A3, SEAT ALTEA, LEON, TOLEDO, SKODA OCTAVIA, SUPERB, YETI, VW CADDY, EOS, FOX, GOLF, JETTA, POLO 09.00-09.20 TY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear
• Weight [kg]: 0.739
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Construction Year from: 09.2009, 11.2009
• Construction Year to: 09.2009
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.581
• Fitting Position: Rear
• Material: Rubber/Metal
• Required quantity: 1
• General Information: support for front axle beam; MT
• Manufacturer: VIKA

• Quantity: 1
• Construction Year from: 11.2009
• Construction Year to: 11.2009
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.632
• Fitting Position: Rear
• Material: Rubber/Metal
• Required quantity: 1
• General Information: support for front axle beam
• Manufacturer: VIKA

• Transmission Type: 6-Speed Automatic Transmission
• Fitting Position: Rear
• Manufacturer: CORTECO
• Name: COC 80001307

• Fitting Position: Rear
• Manufacturer: CORTECO
• Name: COC 80001888

• Fitting Position: Front
• General Information: pendulum support
• Manufacturer: BORSEHUNG

• Transmission Type: 5-Speed Manual Transmission
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: Torque Support
• Name: PAIGUTUS,KŽIGUKAST
• Manufacturer: MEY

• Engine Code: BSF, BSE
• Transmission Type: Manual Transmission
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.581
• Name: SW 30 93 1959
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear
• for OE number: 1K0 199 855 AD, 1K0 199 855 BA, 1K0 199 855 K
• Name: PAIGUTUS,MOOTOR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: 6-Speed Automatic Transmission
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: Torque Support
• Length [mm]: 314.1
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Engine Code: BSF
• Fitting Position: Upper, Lower
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.5
• for OE number: 1K0 199 867 Q S1
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BSF
• Fitting Position: Upper, Lower
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.5
• for OE number: 1K0 199 867 Q S1
• Name: SW 30 94 5308
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Left Front
• for OE number: 1K0 199 555 M
• Manufacturer: MERTZ

• Fitting Position: Left Front
• Manufacturer: MERTZ

• Fitting Position: Front Axle, Left
• Manufacturer: GSP