• Switch pressure from [bar]: 0.55
• Switch pressure to [bar]: 0.85
• Colour Coding: brown
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Engine Code: CEGA
• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• Colour Coding: black
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Quantity per packing unit: 5
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Name: Rongastihend,mootorioli tasemeandur
• Manufacturer: ELR

• Pressure [bar]: 2.5
• General Information: oil pressure switch；2.5Bar
• Manufacturer: VIKA

• Engine Code: CEGA
• Colour: black
• Number of pins: 1
• Thread Size: M10x1
• Pressure from [bar]: 1.2
• Pressure to [bar]: 1.6
• Name: OLISURVELšLITUS
• Manufacturer: MAX
• Lisainfo: 21-0107
• Additional information: 21-0107

• Engine Code: BMN
• Pressure [bar]: 1
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Quantity: 1
• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• Weight [kg]: 0.031
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Number of connectors: 1
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour Coding: brown
• General Information: oil pressure switch
• Manufacturer: VIKA

• Quantity: 1
• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• Weight [kg]: 0.031
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Number of connectors: 1
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour Coding: brown
• General Information: oil pressure switch
• Manufacturer: VIKA

• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Colour Coding: brown
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,55 - 0,85
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Always compare old and new part (in particular OE No.):
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: DRM

Brief Information: Always compare old and new part (in particular OE No.)

• Name: Rongastihend,mootorioli tasemeandur
• Manufacturer: MAX

• Engine Code: BMN
• Colour: brown
• Thread Size: M10x1
• Spanner Size: 24
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Fabrication Number: ECC-AU-005
• Thread Size: M10x1,0
• Supplementary Article/Info 2: with seal ring
• Number of pins: 1
• Socket colour: black
• Manufacturer: NTY
• Name: NTY ECC-AU-005

• Fabrication Number: ECC-AU-004
• Socket colour: brown
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NTY
• Name: NTY ECC-AU-004

• Engine Code: CEGA
• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• External Thread Size: M10 x 1
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB
• Additional information: F18904
• Lisainfo: F18904

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CEGA
• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• External Thread Size: M10 x 1
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 91 8904
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 1
• Number of circuits: 1
• Plug Type: Female
• Cable insulation material: Silicone
• Material: CuSn (copper-tin)
• Cable Length [mm]: 300
• Cable cross-section from [mm²]: 0.75
• Cable cross-section to [mm²]: 0.75
• Manufacturer: 3RG

• Pressure from [bar]: 1.2
• Pressure to [bar]: 1.6
• Combi Switch Function: Normally Open Contact
• Colour: black
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Engine Code: CEGA
• Thread Size: M10x1,0
• Control Range [bar]: 1,2 - 1,6
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CEGA
• Pressure [bar]: 6
• Housing Colour: green
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Lisainfo: SW90024
• Additional information: SW90024

• Thread Size: M10x1
• Spanner Size: 22
• Colour Coding: brown
• Number of pins: 1
• Pressure from [bar]: 0.55
• Pressure to [bar]: 0.85
• Name: OLISURVELšLITUS
• Manufacturer: MAX
• Lisainfo: 21-0359
• Additional information: 21-0359

• Pressure [bar]: 8.5
• Housing Colour: dark-brown
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Engine Code: BMN
• Colour: brown
• Pressure to [bar]: 0.85
• Pressure from [bar]: 0.55
• Pressure [bar]: 0.7
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: BMN
• Colour: brown
• Pressure to [bar]: 0.85
• Pressure from [bar]: 0.55
• Pressure [bar]: 0.7
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET

• Switch Pressure [bar]: 0.7
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: brown
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: oil pressure switch
• Manufacturer: BORSEHUNG

• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: brown
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 91 9018
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 10x1
• Housing Colour: green
• Pressure [bar]: 0.5
• Manufacturer: FAE

• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.6
• Combi Switch Function: Normally Open Contact
• Colour: green
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY
• Lisainfo: 1148200001
• Additional information: 1148200001

• Thread Size: M 10x1
• Housing Colour: brown
• Pressure [bar]: 0.7
• Manufacturer: FAE

• Quantity: 1
• Control Range [bar]: 0.55/0.85BAR
• Colour: brown
• General Information: oil pressure switch
• Manufacturer: BORSEHUNG

• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Tightening torque from [Nm]: 20
• Voltage [V]: 12
• Combi Switch Function: Normally Open Contact
• Current Strength [A]: 0.15
• Tolerance [%]: 15
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.555
• Pressure to [bar]: 0.85
• Number of pins: 1
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

• Switch pressure from [bar]: 0.55
• Switch pressure to [bar]: 0.85
• Thread Size: M10x1
• Corresponds to the original part in colour: brown, black
• Manufacturer: METZGER

• Pressure from [bar]: 0.55
• Pressure to [bar]: 0.85
• Combi Switch Function: Normally Open Contact
• Colour: brown
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Thickness [mm]: 3.7
• for OE number: 12617604790
• Inner Diameter [mm]: 39.5
• Outer Diameter [mm]: 47.5
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: AJU

• Control Range [bar]: 2.15/2.95BAR
• Colour: blue
• General Information: oil pressure switch
• Manufacturer: BORSEHUNG

• Housing Colour: black
• Observe technical data:
• Manufacturer Restriction: VAG
• Socket Width [mm]: 1.5
• Number of pins: 1
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.5
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabliparanduskomplekt, olisurvelliti
• Manufacturer: HBE

• Number of pins: 1
• Plug Type: Female
• Number of circuits: 1
• Material: CuSn (copper-tin)
• Cable Length [mm]: 250
• Cable cross-section from [mm²]: 0.75
• Cable cross-section to [mm²]: 0.75
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with shrink squeeze connector
• for OE number: 1J0973081, 1J0973701
• Manufacturer: METZGER

• Number of pins: 1
• for OE number: 1J0973081
• Manufacturer: MEAT & DORIA

• Fitting Depth [mm]: 52
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Fabrication Number: EPO-AU-001
• Manufacturer: NTY
• Name: NTY EPO-AU-001

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Housing Type: Aluminium Housing
• Connector Shape: D Shape
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: MAX

• for manufacturer number: 1040011
• Manufacturer: KAMOKA

• Number of connectors: 3
• Manufacturer: JPN

• Vehicle Identification Number (VIN) from: 5P-7-000001
• Fitting Position: Oil Sump
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Number of mounting bores: 3
• Housing Type: Aluminium Housing
• Housing material: Plastic, Polyamid 6.6
• Housing Colour: black
• for OE number: 1J0 907 660F
• Observe system fill quantity:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Height [mm]: 83
• Fitting Depth [mm]: 52
• for OE number: 94860614000
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• Quantity: 1
• Number of connectors: 3
• Plug Type: Blade Terminal
• Connector Shape: oval
• General Information: oil level sensor
• Manufacturer: VIKA

• Construction Year to: 05.2010
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV235

• Voltage [V]: 12
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV388
• Manufacturer: ESEN SKV

Manufacturer: 3RG

• General Information: oil level sensor
• Manufacturer: VIKA

• Production date to: 30.04.2010
• Block Separation:
• Production date from: 01.05.2010
• for PR number: T9G, TM0
• Number of pins: 3
• Connector Shape: D Shape
• Voltage [V]: 12
• Manufacturer: METZGER

• Number of connectors: 3
• Plug Type: Blade Terminal
• Connector Shape: oval
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Production date from: 01.05.2010
• for PR number: TP4
• Version: IAM
• Manufacturer: METZGER

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Quality: OE EQUIVALENT
• for OE number: 03C907660G
• Manufacturer: MEAT & DORIA