• Material: Plastic
• Manufacturer: JP GROUP A/S
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Engine Code: BMN
• Material: Plastic
• Number of inlets/outlets: 3
• Shape: Y Shape
• Manufacturer: JP GROUP

• Engine Code: BMN
• Quantity per packing unit: 100
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Material: Plastic
• for OE number: 032121142
• Manufacturer: DELLO AUTOMEGA

• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.003
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Weight [kg]: 0.015
• Material: Plastic
• Required quantity: 1
• General Information: retaining spring
• Manufacturer: VIKA

• Material: Plastic
• Name: STOPPER
• Manufacturer: MAX

• Material: Plastic
• Weight [kg]: 0.015
• Name: KINNITUSVEDRU, JAHUTUSVEDELIKUFLANTS-SULGURKORK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 32
• Thickness [mm]: 1.98
• Material: Steel
• Weight [kg]: 0.001
• Name: KINNITUSVEDRU, JAHUTUSVEDELIKUFLANTS-SULGURKORK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BMN
• Fitting Position: Cylinder Head
• Quantity per packing unit: 25
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 56.3
• Thickness [mm]: 3.15
• Shape: O-Ring
• Manufacturer: ELRING

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Shape: T Shape (T Piece)
• Number of inlets/outlets: 3
• Angle [°]: 90
• Material: GRP (Glass fibre Reinforced Plastic)
• for pipe diameter [mm]: 32, 20
• for OE number: N 906 929 01
• Consult accessories list for recommended additional repairs:
• Name: šHENDUS-/JAGAJALšLI, TORUSTIKUD
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for manufacturer number: 7920011
• Manufacturer: KAMOKA

• for manufacturer number: 7920045
• Manufacturer: KAMOKA

• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: N 906 929 01
• Name: Jahutusvedeliku flants
• Manufacturer: MAX

• Fitting Position: Radiator, Upper
• Supplementary Article/Info 2: with clip
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 6Q0 122 291E
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 3
• Material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cooling Hose: from connecting pipe to engine cooler
• Fitting Position: Radiator, Upper
• Lisainfo: Quick coupling piece
• Additional information: Quick coupling piece

• Engine Code: BMN
• Fitting Position: Radiator
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with gasket/seal
• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 3B0 122 291B
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 1K0 121 087B
• Name: Jahutusvedeliku flants
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• for OE number: 3B0 122 291B
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 2
• Material: GRP (Glass fibre Reinforced Plastic)
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: pipe union
• Manufacturer: VIKA

• Engine Code: BMN
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: CTM-VW-087
• Manufacturer: NTY

• for manufacturer number: 7920073
• Manufacturer: KAMOKA

• for manufacturer number: 7920110
• Manufacturer: KAMOKA

• General Information: pipe union
• Manufacturer: VIKA

• Fitting Position: Upper Right, Radiator
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• for OE number: 1K0 122 291BM
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 2
• Material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. Name: KRàCIEC UKADU CHODZENIA VW GOLF 07-16 1,6/2,0 TDI

• General Information: pipe union
• Manufacturer: VIKA

• Engine Code: BMN
• Weight [kg]: 0.055
• Supplementary Article/Supplementary Info: with quick coupling
• for OE number: 6Q0 122 291 E
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BMN, CEGA
• Transmission Type: Manual Transmission
• Block Separation:
• Housing material: Plastic
• Colour: black
• for OE number: 3C0122291D
• Manufacturer: DELLO AUTOMEGA

• Fabrication Number: CTM-VW-080
• Manufacturer: NTY

• Fabrication Number: CTM-VW-083
• Manufacturer: NTY

• Transmission Type: Manual Transmission
• Fitting Position: Upper, Radiator
• Supplementary Article/Supplementary Info: with gasket/seal
• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 3C0 122 291
• Name: Jahutusvedeliku flants
• Manufacturer: MAX

• Engine Code: BMN
• Weight [kg]: 0.055
• Supplementary Article/Supplementary Info: with quick coupling
• for OE number: 6Q0 122 291 E
• Name: SW 30 94 5984
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for manufacturer number: 7920111
• Manufacturer: KAMOKA

• for OE number: 6Q0122291E
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [g]: 55
• Supplementary Article/Info 2: without thermostat
• Name: IM 90570
• Manufacturer: ORIGINAL IMPERIUM

• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with quick coupling
• for OE number: 1K0 122 291 J
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1K0122291H
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 31
• Supplementary Article/Info 2: without thermostat
• Name: KRàCIEC UKADU CHODZENIA VW
• Manufacturer: IMP

• Length [mm]: 59.2
• Weight [kg]: 0.025
• Inner Diameter [mm]: 29
• Manufacturer: METALCAUCHO

• Engine Code: BMN, CEGA
• Transmission Type: Manual Transmission
• Block Separation:
• Fitting Position: Radiator, Upper
• Lisainfo: Coolant Flange
• Additional information: Coolant Flange

• Material: Plastic
• Fabrication Number: CTM-VW-043
• Manufacturer: NTY

• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• for OE number: 1K0 122 291J
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 2
• Material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Shape: Y Shape
• Number of inlets/outlets: 3
• Angle [°]: 50
• Material: GRP (Glass fibre Reinforced Plastic)
• Length [mm]: 60
• for pipe diameter [mm]: 8
• for OE number: 1K0 121 087B
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: pipe union
• Manufacturer: VIKA

• Diameter 1 [mm]: 20
• Diameter 2 [mm]: 36
• for OE number: 3B0122291B
• Manufacturer: MEAT & DORIA

• for OE number: 3B0122291B
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [g]: 29
• Supplementary Article/Info 2: without thermostat
• Name: IM 90582
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: BMN
• Construction Year to: 10.2010
• Name: EP 1.660.020
• Manufacturer: EPS

• Engine Code: BMN
• Construction Year to: 10.2010
• Manufacturer: FACET

• Construction Year to: 10.2010
• Weight [g]: 29
• Material: Plastic
• for OE number: 1K0122291H
• Packaging length [cm]: 7.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 8.3
• Manufacturer: MOTORAD

• Engine Code: BMN
• Fitting Position: Cylinder Head, Left
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Cylinder Head
• Thickness [mm]: 5
• Width [mm]: 56
• Length [mm]: 56
• Name: Tihend,jahutusvededelikuflants
• Manufacturer: AJU

• for manufacturer number: 7920100
• Manufacturer: KAMOKA

• for PR number: 1SA
• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 1K0 122 291L
• Name: Jahutusvedeliku flants
• Manufacturer: MAX

• Weight [kg]: 0.03
• for OE number: 1K0 122 291 H
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• for OE number: 1K0 122 291H
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 2
• Material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Fitting Position: Radiator, Upper
• Supplementary Article/Info 2: with clip
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 3C0 122 291
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 3
• Material: GRP (Glass fibre Reinforced Plastic)
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Plastic
• Fitting Position: Front, Longitudinal
• Heating/Cooling: with thermal switch connector
• General Information: pipe union
• Manufacturer: VIKA

• for manufacturer number: 7920027
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Material: Plastic
• Weight [g]: 30
• Manufacturer: METALCAUCHO

• Construction Year to: 10.2010
• Weight [g]: 80
• Material: Plastic
• for OE number: 03G121121D
• Colour: black
• Number of mounting bores: 2
• Packaging length [cm]: 9.1
• Packaging width [cm]: 9.1
• Packaging height [cm]: 13.5
• Manufacturer: MOTORAD

• Production date to: 20.07.2009
• Material: Plastic
• Heating/Cooling: with thermal switch connector
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Jahutusvedeliku flants
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Production date from: 20.07.2009
• Material: Plastic
• Number of inlets/outlets: 5
• Heating/Cooling: with thermal switch connector
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Jahutusvedeliku flants
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: pipe union
• Manufacturer: VIKA

• for OE number: 03L121121A
• Fitting Position: Left
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 87
• Supplementary Article/Info 2: without thermostat
• Name: IM 90422
• Manufacturer: ORIGINAL IMPERIUM

• for PR number: 1SA
• Supplementary Article/Info 2: with clip
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 1K0 122 291L
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 2
• Material: GRP (Glass fibre Reinforced Plastic)
• Name: Jahutusvedeliku flants
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BMN
• Construction Year to: 10.2010
• Name: EP 1.660.029
• Manufacturer: EPS

• Engine Code: BMN
• Construction Year to: 10.2010
• Manufacturer: FACET

• Material: Plastic
• Weight [kg]: 0.05
• for OE number: 3C0 122 291
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [g]: 90
• Supplementary Article/Info 2: without thermostat
• Manufacturer: METALCAUCHO

• Engine Code: BMN
• Name: EP 1.660.007
• Manufacturer: EPS

• Material: Plastic
• Heating/Cooling: with thermal switch connector
• Fitting Position: Front
• Name: Jahutusvedeliku flants
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BMN
• Name: EP 1.660.022
• Manufacturer: EPS

• Engine Code: BMN
• Name: EP 1.660.021
• Manufacturer: EPS

• Engine Code: BMN
• Manufacturer: FACET

• Engine Code: BMN
• Manufacturer: FACET

• General Information: pipe union
• Manufacturer: VIKA

• Engine Code: BMN
• Length [mm]: 59.2
• Inner Diameter [mm]: 29
• Weight [kg]: 0.025
• Supplementary Article/Supplementary Info: with quick coupling
• for OE number: 3B0 122 291 B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for manufacturer number: 7920020
• Manufacturer: KAMOKA

• Production date to: 02.08.2009
• Material: GRP (Glass fibre Reinforced Plastic)
• Fitting Position: Cylinder Head
• Name: Termostaat,Jahutusvedelik
• Manufacturer: MAX

• Quantity: 1
• Material: Plastic
• Fitting Position: Front, Upper
• Diameter 1 [mm]: 20
• Diameter 2 [mm]: 32
• Diameter 3 [mm]: 32
• Manufacturer: 3RG

• Engine Code: BMN
• Length [mm]: 59.2
• Inner Diameter [mm]: 29
• Weight [kg]: 0.025
• Supplementary Article/Supplementary Info: with quick coupling
• for OE number: 3B0 122 291 B
• Name: SW 30 10 3334
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Cylinder Head, transmission sided
• Supplementary Article/Info 2: with seal ring
• Material: Plastic
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• General Information: pipe union
• Manufacturer: VIKA

• for OE number: 03L121132
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [g]: 145
• Supplementary Article/Info 2: without thermostat
• Name: IM 90720
• Manufacturer: ORIGINAL IMPERIUM