• Fitting Position: Front Axle Right
• paired article number: 1144600870
• Lisainfo: Tie rod end, right
• Additional information: Tie rod end, right

• Fitting Position: Front Axle Left
• paired article number: 1144600880
• Lisainfo: Tie rod end, left
• Additional information: Tie rod end, left

• Vehicle type: Altea XL, Altea Freetrack
• Block Separation:
• Construction Year from: 05.2008
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Tie rod, left/right
• Additional information: Tie rod, left/right

• Fitting Position: Front Axle Right, outer
• paired article number: 5034781
• Thread Size: 16x1,5
• Thread Type: with right-hand thread
• Net weight [kg]: 0.46
• Name: Liigend - Roolimine VW GOLF 5
• Manufacturer: NK

• Fitting Position: Rear Axle, Upper, both sides, outer
• Quantity per axle: 2
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: MAX

• Fitting Position: Rear Axle, Upper, both sides, inner
• Quantity per axle: 2
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: MAX

• Quantity per packing unit: 2
• Fitting Position: Rear Axle, both sides, Rear Axle Upper, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Mounting Type: Rubber-Metal Mount
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 5
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Right, Rear Axle Left
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Bolt Head-/Nut Design: Male Hex
• Strength class: 10.9
• Spanner Size: 18
• Surface: Zink flake coated
• Axle: Independent wheel suspension
• Consult accessories list for recommended additional repairs:
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: MM16X1.5R
• Thread Size 1: MM16X1.5R
• Axle Joint Length [mm]: 311
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Right
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Right, outer
• Length [mm]: 93
• Thread Size: M16 X 1.5
• Cone Size [mm]: 13
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, outer
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Right
• Length [mm]: 93
• Cone Size [mm]: 13
• paired article number: 9010262
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Length [mm]: 93
• Cone Size [mm]: 13
• paired article number: 9010263
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles with electric power steering
• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Axle Joint Thread Type: with right-hand thread
• Axle Joint Length [mm]: 288
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Vehicle Equipment: for vehicles with electric power steering
• Fitting Position: Front Axle
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• Quality class: PJ
• Name: Tie rod end right

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Vehicle Equipment: for vehicles with electric power steering
• Fitting Position: Front Axle
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• Quality class: PJ
• Name: Tie rod end left

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Upper, both sides, outer
• Quantity per axle: 2
• Article number of recommended accessories: 38823 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, outer
• Fabrication Number: SKZ-VW-007
• paired article number: SKZ-VW-008
• Manufacturer: NTY
• Name: NTY SKZ-VW-007

• Fitting Position: Front Axle Right, outer
• Fabrication Number: SKZ-VW-008
• paired article number: SKZ-VW-007
• Manufacturer: NTY
• Name: NTY SKZ-VW-008

• Fitting Position: Front Axle Left
• Length [mm]: 95
• Internal Thread [mm]: M16x1,5
• External Thread [mm]: M12x1,5
• Supplementary Article/Info 2: with self-locking nut
• paired article number: M-S0200
• Manufacturer: MERTZ

• Fitting Position: Front Axle Right
• Length [mm]: 95
• Internal Thread [mm]: M16x1,5
• External Thread [mm]: M12x1,5
• Supplementary Article/Info 2: with self-locking nut
• paired article number: M-S0199
• Manufacturer: MERTZ

• Fitting Position: Rear Axle, Upper, both sides, inner
• Quantity per axle: 2
• Article number of recommended accessories: 38823 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• External Thread [mm]: M16x1,5
• Internal Thread [mm]: M16x1,5
• Length [mm]: 311
• Manufacturer: MERTZ

• Fitting Position: Front Axle Left, outer
• Thread Size: FM16X1.5
• Cone Size [mm]: 13.5
• Thread Size 2: MM12X1.5
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Fabrication Number: SDK-VW-003
• Manufacturer: NTY

• Fitting Position: Front Axle Right, outer
• Thread Size: FM16X1.5
• Cone Size [mm]: 13.5
• Thread Size 2: MM12X1.5
• Manufacturer: OYODO

• Vehicle Equipment: for vehicles with electric power steering
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: 69-0187
• Fitting Position: Front Axle Left
• Name: Liigend - Roolimine VW GOLF 5 LE
• Manufacturer: MAX
• Lisainfo: MGZ-301042
• Additional information: MGZ-301042

• Vehicle Equipment: for vehicles with electric power steering
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: 69-0186
• Fitting Position: Front Axle Right
• Name: Liigend - Roolimine VW GOLF 5 PR
• Manufacturer: MAX
• Lisainfo: MGZ-301043
• Additional information: MGZ-301043

• Fitting Position: Front Axle Left, outer
• Thread Size: FM16X1.5 RHT
• Cone Size [mm]: 13.5
• Length [mm]: 96
• Thread Size 2: MM12X1.5 RHT
• paired article number: 230620
• Weight [kg]: 0.419
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 3C0423810A
• Thread Size 1: M16X1,5
• Thread Size 2: M16X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Right
• paired article number: S070032
• Length [mm]: 95.5
• Cone Size [mm]: 13.5
• Thread Size 1: M12X1,5
• Thread Size 2: M16X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Left
• paired article number: S070033
• Length [mm]: 95.5
• Cone Size [mm]: 13.5
• Thread Size 1: M12X1,5
• Thread Size 2: M16X1,5
• Manufacturer: GSP ZAWIESZENIE

• for OE number: 1K0423812J
• Thread Size 1: M12x1.5
• Thread Size 2: M16x1.5
• Cone Size [mm]: 13.5
• paired article number: DSS1209
• Fitting Position: Front Axle Right
• Name: DA DSS1210
• Manufacturer: DAYCO

• Fitting Position: Front Axle Left
• Weight [kg]: 0.419
• Width [mm]: 46
• max. length [mm]: 117
• Height [mm]: 74
• Material: Steel
• Thread Size 1: M12x1,5
• Thread Size 2: M16x1,5
• paired article number: V-551
• Name: Tie rod end left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A3, 03-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A3, 03-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Right, outer
• Thread Size: FM16X1.5 RHT
• Cone Size [mm]: 13.5
• Length [mm]: 96
• Thread Size 2: MM12X1.5 RHT
• paired article number: 230619
• Weight [kg]: 0.413
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right, Front Axle Left
• Overall Length [mm]: 334
• External Thread 1 [mm]: M 16
• Thread Pitch 1 [mm]: 1.5
• External Thread 2 [mm]: M 16
• Thread Pitch 2 [mm]: 1.5
• Supplementary Article/Info 2: with nut
• DIN standards (Nuts): DIN 936 (thin hexagon nuts)
• Spanner Size: 24
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Weight [kg]: 0.413
• Width [mm]: 46
• max. length [mm]: 117
• Height [mm]: 74
• Material: Steel
• Thread Size 1: M12x1,5
• Thread Size 2: M16x1,5
• paired article number: V-552
• Name: Tie rod end right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A3, 03-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A3, 03-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left
• Internal Thread [mm]: M 16 x 1,5
• Supplementary Article/Info 2: with nut
• paired article number: 110 174
• External Thread [mm]: M 12 x 1,5
• Length [mm]: 95
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Weight [kg]: 0.4
• Length [mm]: 90
• Thread Size 1: M12x1,50
• Thread Size 2: M16x1,50
• Manufacturer: 3RG

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size 1: M16X1.5
• Thread Size 2: M16X1.5
• Manufacturer: OYODO

• Fitting Position: Front Axle Right
• Internal Thread [mm]: M 16 x 1,5
• Supplementary Article/Info 2: with nut
• External Thread [mm]: M 12 x 1,5
• Length [mm]: 95
• paired article number: 110 173
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Internal Thread [mm]: M 16x1,5
• Thread Type: with right-hand thread
• paired article number: 49398596
• Name: COC 49398648
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left
• Internal Thread [mm]: M 16x1,5
• Thread Type: with right-hand thread
• paired article number: 49398648
• Manufacturer: CORTECO
• Name: COC 49398596

• Fitting Position: 1st front axle left
• Length [mm]: 94
• Thread Size 1: M16x1.5
• Thread Size 2: M12x1.5
• paired article number: 22-06102-1
• Weight [kg]: 0.41
• Name: DY 22-06102-2
• Manufacturer: DYS

• Fitting Position: 1st front axle right
• Length [mm]: 94
• Thread Size 1: M16x1.5
• Thread Size 2: M12x1.5
• paired article number: 22-06102-2
• Weight [kg]: 0.41
• Name: DY 22-06102-1
• Manufacturer: DYS

• Fitting Position: Front Axle, inner
• Weight [kg]: 0.665
• Width [mm]: 36
• Material: Steel
• Height [mm]: 36
• max. length [mm]: 330
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF V/TOURAN/A3
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF V/TOURAN/A3
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle both sides
• Length [mm]: 311
• Weight [kg]: 0.748
• Required quantity: 2
• External Thread [mm]: M16 x 1,5
• General Information: track rod
• Manufacturer: VIKA

• Fitting Position: Front Axle Right
• Base body material: Steel
• Net weight [kg]: 0.44
• Thread Size: RHT M16x1.5
• Thread Size 1: RHT M16x1,5
• paired article number: G10.3029
• Name: OMG G10.3030
• Manufacturer: OMG

• Fitting Position: Front Axle Left, outer
• paired article number: 5034782
• Thread Size: 16x1,5
• Thread Type: with right-hand thread
• Net weight [kg]: 0.45
• Name: Liigend - Roolimine VW GOLF 5
• Manufacturer: NK

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 310
• Thread Size 1: M16X1.5 RHT
• Thread Size 2: M16X1.5 RHT
• paired article number: 240375
• Weight [kg]: 0.665
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• paired article number: 80025AL
• Cone Size [mm]: 13.3, 16.4
• Length [mm]: 95
• Thread Size: M16 x 1,5, M12 x 1,5
• Name: ALT 80024AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left
• paired article number: 80024AL
• Cone Size [mm]: 13.3, 16.4
• Length [mm]: 95
• Thread Size: M16 x 1,5, M12 x 1,5
• Name: ALT 80025AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size 1: 16x1,5
• Thread Type: with right-hand thread
• Length [mm]: 310
• Net weight [kg]: 0.7
• Name: Liigend - Roolimine VW A3/GOLF5/PASSAT 03- LE/PR
• Manufacturer: NK

• Thread Size: M16x1.5
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.3
• paired article number: TA1914
• Fitting Position: Front Axle Right
• Length [mm]: 120
• Width [mm]: 40
• Height [mm]: 80
• Manufacturer: DELPHI
• Name: DE TA1915

• Fitting Position: Front Axle Right, Front Axle Left
• External Thread [mm]: M 16x1,5
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left
• Length [mm]: 94
• Weight [kg]: 0.412
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: 53163
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle Left, outer
• Length [mm]: 94
• Thread Size: M12x1,5
• Internal Thread [mm]: M16x1,5
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle Right, outer
• Length [mm]: 94
• Thread Size: M12x1,5
• Internal Thread [mm]: M16x1,5
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle Left
• Internal Thread [mm]: M 16x1,5
• Thread Type: with right-hand thread
• paired article number: 49398834
• Name: COC 49398852
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right
• Internal Thread [mm]: M 16x1,5
• Thread Type: with right-hand thread
• paired article number: 49398852
• Manufacturer: CORTECO ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 311
• Thread Size 1: M16x1.5
• Thread Size 2: M16x1.5
• Weight [kg]: 0.66
• Name: DY 24-06103
• Manufacturer: DYS

• Vehicle Equipment: for vehicles with electric power steering
• Fitting Position: Front Axle
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: QS4181/HQ
• Name: Liigend - Roolimine VW GOLF 5 PR
• Manufacturer: QUARO

• Thread Size 2: M16x1.5
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 332
• Width [mm]: 37
• Height [mm]: 37
• Manufacturer: DELPHI
• Name: DE TA1905

• Fitting Position: Front Axle Right
• paired article number: KTR4056
• Manufacturer: KAYABA AMORTYZATORY

• Fitting Position: Front Axle Left
• paired article number: KTR4055
• Manufacturer: KYB

• Fitting Position: Front Axle Right
• Vehicle Equipment: for vehicles with electric power steering
• paired article number: VKDY 311016
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: SKF
• Name: SK VKDY311017

• Fitting Position: Front Axle Left
• Vehicle Equipment: for vehicles with electric power steering
• paired article number: VKDY 311017
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: SKF
• Name: SK VKDY311016

• Fitting Position: Front Axle Left
• Thread Size: M16x1,5
• for OE number: 1K0423811J
• paired article number: 9006637
• Manufacturer: SASIC

• Thread Size: M16x1.5
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.3
• paired article number: TA1915
• Fitting Position: Front Axle Left
• Length [mm]: 120
• Width [mm]: 40
• Height [mm]: 80
• Manufacturer: DELPHI
• Name: DE TA1914

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Front Axle
• Weight [kg]: 0.705
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Packaging length [cm]: 34
• Packaging width [cm]: 4.5
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle Right
• Thread Size: M16x1,5
• for OE number: 1K0423812J
• paired article number: 9006638
• Manufacturer: SASIC

• Vehicle Equipment: for vehicles with electric power steering
• Fitting Position: Front Axle
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Axle Joint Length [mm]: 288
• Name: Liigend - Roolimine VW GOLF 5 LE/PR
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Thread Size 1: M16x1,5 A
• Thread Size 2: M16x1,5 A
• Axle Joint Length [mm]: 311
• SVHC: No SVHC present!
• Name: Sisemine rooliots,roolivarras
• Manufacturer: FAG

• Fitting Position: Front Axle
• Manufacturer: KYB

• paired article number: ADV188708
• Length [mm]: 95
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Fitting Position: Front Axle Left
• Weight [kg]: 0.4
• Supplementary Article/Supplementary Info: with lock nut
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.