Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- for PR number: K8P
- Fitting Position: Rear
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Vehicle Identification Number (VIN) from: 5P-
9- 500001 - for PR number: K8P
- Fitting Position: Vehicle rear window
- Colour: black
- Material: Plastic
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Vehicle rear window
- Colour: black
- Material: Plastic
-
Fabrication Number: ESW-
VW- 020 - Manufacturer: NTY
-
Name: NTY ESW-
VW- 020
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear
- Manufacturer: METZGER
- Length [mm]: 280
- Fitting Position: Rear
- Supplementary Article/Supplementary Info: with wiper blade
- for OE number: 3C9955425
- Manufacturer: KAMOKA
- Length [mm]: 330
- Fitting Position: Rear
- Supplementary Article/Supplementary Info: with wiper blade
- Manufacturer: KAMOKA
- Length [mm]: 290
- Fitting Position: Rear
- Supplementary Article/Supplementary Info: with wiper blade
- Manufacturer: KAMOKA
-
Vehicle Identification Number (VIN) from: 5P-
9- 500 001 - for PR number: K8P
- Supplementary Article/Info 2: with cap
- Fitting Position: Rear
- Wiper blade type: Flat wiper blade
- Supplementary Article/Supplementary Info: without wiper blade
- Manufacturer: ENERGY
- Fitting Position: Rear
- Supplementary Article/Info 2: with cap
- Wiper blade type: Flat wiper blade
- Length [mm]: 259
-
Material: PBT,
GRP (Glass fibre Reinforced Plastic) -
Left-/right-hand drive vehicles: for left-
hand/ right- hand drive vehicles - Supplementary Article/Supplementary Info: without wiper blade
-
Technical Information: Caution,
observe wiper blade receptacle. - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Vehicle Identification Number (VIN) from: 5P-
9- 500 001 - for PR number: K8P
- Fitting Position: Rear
- Length [mm]: 330
- Manufacturer: OYODO
-
Vehicle Identification Number (VIN) from: 5P-
9- 500 001 - for PR number: K8P
- Fitting Position: Rear
-
Lisainfo: Wiper arm,
rear -
Additional information: Wiper arm,
rear
-
Vehicle Identification Number (VIN) from: 5P-
6- 032001 -
Vehicle Identification Number (VIN) to: 5P-
9- 500000 - Fitting Position: Rear
-
Supplementary Article/Info 2: with integrated wiper blade,
with cap - Length [mm]: 330
-
Name: Kojamees,
klaasipesu - Manufacturer: MAX
- Fitting Position: Rear
-
Supplementary Article/Info 2: with cap,
with integrated wiper blade - Manufacturer: OYODO
- Fitting Position: Rear
- Length [mm]: 330
-
Supplementary Article/Info 2: without vehicle-
specific adaptor - Name: Klaasipuhastaja kumm
- Manufacturer: MAG
-
Vehicle Identification Number (VIN) from: 5P-
9- 500 001 - for PR number: K8P
- Supplementary Article/Info 2: with cap
- Fitting Position: Rear
- Wiper blade type: Flat wiper blade
- Supplementary Article/Supplementary Info: without wiper blade
- Manufacturer: METZGER
-
for PR number: K8R,
K8A -
Material: PBT,
GRP (Glass fibre Reinforced Plastic) - Fitting Position: Rear
- Supplementary Article/Info 2: with cap
-
paired article number: V10-
5493 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) from: 5P-
9- 500 001 - for PR number: K8P
-
Material: PBT,
GRP (Glass fibre Reinforced Plastic) -
Version: AERO-
Wischerarm - Fitting Position: Rear
- Supplementary Article/Info 2: with cap
- Length [mm]: 330
- Weight [kg]: 0.1
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for PR number: K8R,
K8A - Fitting Position: Rear
-
Supplementary Article/Info 2: with cap,
with integrated wiper blade -
Name: Kojamees,
klaasipesu - Manufacturer: MAX
- Vehicle Identification Number (VIN) from: ******5P*9*500001
- Length [mm]: 268
- Material: PBT
- Fitting Position: Rear
- Weight [kg]: 0.1
- Supplementary Article/Info 2: with cover
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: K8R,
K8A - Fitting Position: Rear
-
Supplementary Article/Info 2: with cap,
with integrated wiper blade - Length [mm]: 290
-
Material: PBT,
GRP (Glass fibre Reinforced Plastic) - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Vehicle Identification Number (VIN) from: 5P-
6- 032 001 -
Vehicle Identification Number (VIN) to: 5P-
9- 500 000 - Fitting Position: Rear
-
Supplementary Article/Info 2: with integrated wiper blade,
with cap - Wiper blade length [mm]: 330
- Manufacturer: METZGER
-
for PR number: K8R,
K8A -
paired article number: V10-
5492 -
Supplementary Article/Info 2: with cap,
with integrated wiper blade - Fitting Position: Rear
-
Material: GRP
(Glass fibre Reinforced Plastic), PBT - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for PR number: K8R,
K8A - Fitting Position: Rear
-
Supplementary Article/Info 2: with cap,
with integrated wiper blade - Wiper blade length [mm]: 290
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks