Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
Wheel Side - Internal Toothing wheel side: 30
- External Toothing wheel side: 36
- Joint Type: CV Joint
- Manufacturer: JP GROUP
-
Lisainfo: CV joint kit,
front, outer -
Additional information: CV joint kit,
front, outer
- Fitting Position: transmission sided
- Joint Type: Disc Joint
- Internal Toothing differential side, conn. to transmission: 33
- Length [mm]: 34
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Fitting Position: Wheel Side
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fabrication Number: NPZ-
SK- 005 - Manufacturer: NTY
Fitting Position: Front Axle Left, Front Axle Right, transmission sided Transmission Type: 5-Speed Manual Transmission, Automatic Transmission, 4-Speed Automatic Transmission, Manual Transmission, 6-Speed Manual Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fabrication Number: NPW-
VW- 005 - Manufacturer: NTY
Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, 4-Speed Automatic Transmission, Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Wheel Side
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 50.5
- Length [mm]: 113.5
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Fabrication Number: NPW-
VW- 002 - Manufacturer: NTY
Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Manufacturer: BGA
- Fitting Position: Wheel Side
- Number of Teeth, ABS ring: 45
- Joint Type: CV Joint
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: transmission sided,
Front Axle -
Vehicle Identification Number (VIN) from: 6J-
9- 000 001 -
Engine Code: CAYC,
CLNA -
Transmission Type: 5-
Speed Manual Transmission - Internal Toothing differential side, conn. to conn. shaft: 33
- Number of bores: 6
- Outer Diameter [mm]: 100
- Joint Type: Disc Joint
- Length from [mm]: 34
-
Name: Inner CV-
joint - Quality class: PJ
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side -
Transmission Type: 5-
Speed Manual Transmission - Length [mm]: 113.5
-
Thread Size: M16X1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 50.75
- Technical Information Number: Groove Type Inner
- Manufacturer: GSP
- Fitting Position: Front Axle
- Transmission Type: Manual Transmission
- Number of Teeth: 33
- Diameter [mm]: 100
- Internal Toothing wheel side: 33
- Manufacturer: VIKA
General Information: c.v.joint; inner; 33teeth; MT; 100MM; Inner tooth33mm
- Engine Code: CLNA
- Transmission Type: Manual Transmission
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Lubrication: with grease lubrication
- Joint Diameter [mm]: 90
- Joint Type: CV Joint
- Supplementary Article/Info 2: with bellow
- Supplementary Article/Supplementary Info: with attachment material
- Quantity per axle: 2
- Full Set:
- New Part:
- Used part return not required:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Wheel Side,
Front Axle -
Vehicle Identification Number (VIN) from: 6J-
9- 000 001 -
Engine Code: CAYC,
CLNA -
Transmission Type: 5-
Speed Manual Transmission -
Thread Size: M16x1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Joint Type: CV Joint
-
Name: Outer CV-
joint - Quality class: PJ
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Right,
Front Axle Left - Number of Teeth: 28
- Diameter [mm]: 108
- Internal Toothing wheel side: 28
- General Information: c.v.joint; inner; 28teeth; 108MM; Inner tooth28mm
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 6J-
9- 000 001 -
Engine Code: CAYC,
CLNA -
Transmission Type: 5-
Speed Manual Transmission -
Fitting Position: Front Axle,
Wheel Side - Length [mm]: 113.5
- External Toothing wheel side: 36
- Seal Diameter [mm]: 50.75
- Internal Toothing wheel side: 30
- Weight [kg]: 2.182
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Wheel Side -
Transmission Type: 5-
Speed Manual Transmission - Joint Type: CV Joint
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Bellows Material: Thermoplast
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 771035130
- Fitting Position: Front Axle
- Construction Year from: 01.2010
- Thread Size: M16x1.5
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Bellows Material: Rubber
- Manufacturer: METELLI
-
Fitting Position: Wheel Side,
Front Axle -
Vehicle Equipment: for vehicles with electro-
hydraulic steering - External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Manufacturer: LPR
- Engine Code: CAYC
-
Fitting Position: transmission sided,
Front Axle - Length [mm]: 34
- Outer Diameter [mm]: 100
- Internal Toothing wheel side: 33
- Weight [kg]: 1.7
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: outer
- Seal Diameter [mm]: 52
-
Thread Size: M16x1,
5 - External Toothing wheel side: 36
- Length 2 [mm]: 114.5
- Internal Toothing wheel side: 30
- Name: SN OJK54.028
- Manufacturer: SNR
- Fitting Position: Front Axle
- Internal Toothing wheel side: 30
- External Toothing wheel side: 36
- General Information: c.v.joint; outer; Inner tooth30mm; outer tooth36mm
- Manufacturer: VIKA
-
Rims: for light alloy rims,
with sheet steel rim -
Thread Size: M16x1,
5 - Seal Diameter [mm]: 50.75
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Version: 6 balls
- Length 2 [mm]: 113.5
- Fitting Position: outer
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN OJK54.008
-
Fitting Position: Right,
Left, Front Axle - Joint Type: Disc Joint
- Inner Diameter 2 [mm]: 100
- External Toothing differential side: 33
- Length 2 [mm]: 34
- Name: SN IJK54.003
- Manufacturer: SNR
Vehicle Identification Number (VIN): [6K-X-081153;], [8C-R-000001;], [;8L-X-001445], [8L-X-001446;]
-
Fitting Position: transmission sided,
Front Axle - Weight [kg]: 1.932
- Internal Toothing differential side, conn. to transmission: 33
- Seal Diameter [mm]: 100
- Outer Diameter [mm]: 99
- Joint Type: Disc Joint
- Packaging length [cm]: 20
- Packaging width [cm]: 10.5
- Packaging height [cm]: 10.5
- Manufacturer: FEBEST
-
Vehicle Identification Number (VIN) from: 6J-
9- 000 001 -
Engine Code: CLNA,
CAYC -
Transmission Type: 5-
Speed Manual Transmission -
Fitting Position: Front Axle,
transmission sided - Length [mm]: 34
- Internal Toothing differential side, conn. to conn. shaft: 33
- Outer Diameter [mm]: 99.9
- Number of Holes: 6
- Joint Type: Disc Joint
- Manufacturer: SKF
- Name: SK VKJA8001
-
Vehicle Identification Number (VIN) from: 6J-
9- 000 001 -
Engine Code: CLNA,
CAYC -
Transmission Type: 5-
Speed Manual Transmission -
Fitting Position: Front Axle,
Wheel Side -
Thread Size: M16x1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Joint Type: CV Joint
-
Machined: with groove in inner part
(inside) - Dust Cover: with dust cover
- Manufacturer: SKF
- Name: SK VKJA5265
-
Engine Code: CAYC,
CLNA -
Transmission Type: 7-
Speed Dual- Clutch Transmission -
Fitting Position: Front Axle,
transmission sided - Length [mm]: 64.1
- Internal Toothing differential side, conn. to conn. shaft: 28
- Outer Diameter [mm]: 108
- Joint Type: Disc Joint
-
Machined: with groove in inner part
(inside) - Manufacturer: SKF
- Name: SK VKJA8015
- Model Year to: 2011
-
Fitting Position: Front Axle,
Wheel Side - Weight [kg]: 2.102
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Joint Type: CV Joint
- Packaging length [cm]: 18
- Packaging width [cm]: 10.5
- Packaging height [cm]: 10.5
- Manufacturer: FEBEST
- Joint Type: Disc Joint
- Internal Toothing differential side, conn. to conn. shaft: 33
- Machined: without groove in internal component
- Joint Diameter [mm]: 100
- Length [mm]: 34
- Supplementary Article/Info 2: with cap
- Bore Ø [mm]: 8
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 86
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Manufacturer: GKN LOBRO
Fitting Position: transmission sided, Front Axle Left, Front Axle Right