Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Name: Radiator
- Quality class: P
Lisainfo: IBIZA V (kvaliteediklass P)
- Core Length [mm]: 650
- Core Width [mm]: 322
- Core Depth [mm]: 34
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: KAMOKA
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 308
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: MAX
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 308
- Core Depth [mm]: 26
- Supplementary Article/Info 2: with mounting parts
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 650*328*26
- Additional information: 650*328*26
- Material: Aluminium
- Core Length [mm]: 649
- Core Width [mm]: 342
- Core Depth [mm]: 23
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 650*340*23
- Additional information: 650*340*23
- Engine Code: CUSA
- Core Length [mm]: 649
- Core Width [mm]: 342
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Name: MM BM1823
- Manufacturer: MAGNETI MARELLI
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 341
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 341
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Core Length [mm]: 648
- Core Width [mm]: 326
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
-
Lisainfo: Radiator,
648x326 mm, PL/ ALU -
Additional information: Radiator,
648x326 mm, PL/ ALU
- Construction Year from: 07.2015
-
Transmission Type: 5-
Speed Manual Transmission - Core Width [mm]: 650
- Core Length [mm]: 340
- Core Depth [mm]: 23
- Material: Aluminium
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Heating/Cooling: for vehicles without oil cooler
- Supplementary Article/Info 2: with coolant regulator
- Radiator type: Mechanically jointed cooling fins
- Weight [kg]: 3.01
- Manufacturer: VALEO
- Name: VA 701522
- Name: Radiator
- Quality class: PJ
Lisainfo: IBIZA V (kvaliteediklass PJ)
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 649
- Core Width [mm]: 340
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Cooling fins material: Aluminium
- Manufacturer: MAHLE
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Packaging width [cm]: 12
-
Net Weight [g]: 2,
529 - Packaging height [cm]: 48.5
- Packaging length [cm]: 83.5
-
Name: Radiaator,
mootorijahutus
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 322
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI -
Additional information: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI
- Core Length [mm]: 645
- Core Width [mm]: 88
- Core Depth [mm]: 56
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 89
- Packaging width [cm]: 22
- Packaging height [cm]: 17
- Weight [kg]: 1.44
-
for OE number: 6R0145805E,
6R0145805H - Manufacturer: AKSDASIS
- Name: Radiator
- Quality class: PJ
Lisainfo: A1 (kvaliteediklass PJ)
- Heating/Cooling: Auxiliary Radiator
- Material: Aluminium
- Core Length [mm]: 645
- Core Width [mm]: 88
- Core Depth [mm]: 56
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Lisainfo: 646*86*56
- Additional information: 646*86*56
- Seal Material: Lead
- Core Length [mm]: 0
- Core Width [mm]: 0
- Core Depth [mm]: 0
- General Information: radiator; lead welding
- Manufacturer: VIKA
- Radiator type: Brazed cooling fins
- Core Length [mm]: 648
- Core Width [mm]: 438
- Core Depth [mm]: 32
- Water Tank Material (radiator): Plastic
-
Vehicle Equipment: for vehicles with/
without air conditioning - Packaging width [cm]: 14
-
Net Weight [g]: 3,
781 - Packaging height [cm]: 58.5
- Packaging length [cm]: 90
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Cooling fins material: Aluminium
- Core Depth [mm]: 56
- Core Length [mm]: 646
- Core Width [mm]: 88
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with oil cooler,
with gaskets/ seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI -
Additional information: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI
Quality class: PJ
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks