Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Colour Coding: grey
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender for water temperature gauge,
2 pins -
Additional information: Sender for water temperature gauge,
2 pins
- Number of pins: 4
- Colour Coding: green
- Manufacturer: JP GROUP
- Lisainfo: Sender for water temperature gauge 4 pins
- Additional information: Sender for water temperature gauge 4 pins
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Material: Rubber
- for OE number: 7198663
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Weight [kg]: 0.001
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 1100619
- Manufacturer: KAMOKA
- for OE number: 95510612500
- Manufacturer: KAMOKA
- Colour Coding: grey
-
Fabrication Number: ECT-
VW- 000 - Manufacturer: NTY
-
Name: NTY ECT-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Connector Shape: oval,
D Shape - Colour Coding: grey
- Sensor Type: NTC Sensor
- Number of pins: 2
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 1
- Weight [kg]: 0.015
- Number of connectors: 2
- Screw length below head [mm]: 20
- Colour: grey
- Colour Coding: grey
- General Information: temperature sensor; grey; 2 pins
- Manufacturer: VIKA
- Quantity: 1
- Weight [kg]: 0.015
- Number of connectors: 2
- Screw length below head [mm]: 20
- Colour: black
- Colour Coding: grey
- General Information: temperature sensor; black
- Manufacturer: VIKA
- Weight [kg]: 0.02
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: green
- Required quantity: 1
- General Information: temperature sensor; green; 4 pins
- Manufacturer: VIKA
- Colour Coding: grey
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 2
- for OE number: 06A919501
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Colour Coding: green
- Connector Shape: oval
- Sensor Type: NTC Sensor
- Number of pins: 4
-
for OE number: 059 919 501A,
1 124 770 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 4
- for OE number: 059919501A
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Number of pins: 4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clamp holder
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thread Size: 20 mm
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Additional information: WS2607
- Lisainfo: WS2607
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
- Additional information: FE32510
- Lisainfo: FE32510
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 06A 919 501
- Manufacturer: TRUCKTEC
- Supplementary Article/Info 2: with clamp holder
- Number of pins: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: BWE
- Colour: grey
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- Engine Code: BWE
- Colour: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Thread Size: M20
- Number of pins: 2
- Housing Colour: grey
- Connector Shape: oval
- Manufacturer: ERA
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal - Name: SW 30 93 2510
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Colour: green
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- General Information: temperature sensor
- Manufacturer: VIKA
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Housing Colour: grey
- Number of pins: 2
- Spanner Size: 0
- Name: DE TS10278
- Manufacturer: DELPHI
- Version: 2
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: black,
grey - Fitting Depth [mm]: 20
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead -
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 2
- Colour Coding: grey
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Quantity: 1
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
- Number of connectors: 2
- Colour Coding: grey
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: black
- Required quantity: 1
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour Coding: grey
- Corresponds to the original part in colour: black
- Number of pins: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Version: IAM
-
Article number of recommended accessories: 0899250,
0905513 - Power [W]: 0.06
- Manufacturer: METZGER
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: green
- Required quantity: 1
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG
- Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Weight [kg]: 0.02
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks