• for OE number: 059 906 051 C, 076 906 051 B
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-AU-001
• Manufacturer: NTY

• Number of connectors: 3
• Material: Plastic
• for OE number: 059 906 051 C
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX

• Number of pins: 3
• Manufacturer: JPN

• General Information: pressure sensor
• Manufacturer: VIKA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Vehicle Identification Number (VIN) to: 7N-C-515 000
• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter, not for vehicles with retrofitted soot/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 076 906 051 B
• Manufacturer: TRUCKTEC

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• for OE number: 03G906051G
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Number of connectors: 3
• Manufacturer: FAST

• General Information: pressure difference sender
• Manufacturer: BORSEHUNG

• Engine Code: CFFB
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.266
• Manufacturer: EPS

• Engine Code: CFFB
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Number of mounting bores: 1
• Alternative Repair Kit: 550813
• Number of circuits: 2
• Manufacturer: ERA

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Number of mounting bores: 1
• Number of pins: 3
• Connector Shape: D Shape
• Number of circuits: 2
• for OE number: 059906051C
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

Manufacturer: MAGNETI MARELLI

• Engine Code: CFFB
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Manufacturer: PIERBURG

• Fitting Position: after soot particulate filter
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Fitting Position: after soot particulate filter
• General Information: Sold in Hitachi brand: printing and packaging
• Name: HI 2507410
• Manufacturer: HITACHI

• for OE number: 059906051C
• Manufacturer: MEAT & DORIA

• for OE number: 03L 906 088 ER
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Fabrication Number: EGT-SK-004
• Cable Length [mm]: 660
• Manufacturer: NTY

• Required quantity: 1
• Fitting Position: before soot particulate filter
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 13.7
• Manufacturer: DELPHI
• Name: DE DPS00001

• Number of pins: 3
• Manufacturer: METZGER

• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009409251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before soot particulate filter
• Length [mm]: 730
• Manufacturer: ASHIKA

• Exhaust System: before soot particulate filter
• Length [mm]: 765
• Manufacturer: ASHIKA

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Fitting Position: after soot particulate filter
• Number of pins: 3
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Cable Length [mm]: 750
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-001
• Manufacturer: NTY

• Fabrication Number: EGT-AU-058
• Number of pins: 2
• Connector Shape: D Shape
• Cable Length [mm]: 620
• Fitting Position: after soot particulate filter
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor, Oxygen Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 750
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: CFFB
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 800
• Name: Lambda andur
• Manufacturer: MAX

• Number of circuits: 5
• Length [mm]: 750
• Conductor Number: 5
• Cable Length [mm]: 750
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM149

• Oxygen Sensor: Regulating Sensor
• Fitting Position: Front
• Quantity: 1
• Length [mm]: 900
• Number of connectors: 5
• Manufacturer: VERNET

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Exhaust System: before soot particulate filter
• Cable Length [mm]: 675
• Number of pins: 2
• Name: DE TS30349-12B1
• Manufacturer: DELPHI

• Engine Code: CFFB
• Oxygen Sensor: Heated
• Conductor Number: 5
• Cable Length [mm]: 740
• Fitting Position: before catalytic converter
• Manufacturer: PIERBURG

• Oxygen Sensor: Regulating Sensor, Broadband oxygen sensor, Heated
• Exhaust System: for pre-catalytic converter
• Block Separation:
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 720
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 800
• Number of pins: 6
• Socket colour: black
• Manufacturer: FAE

• Engine Code: CFFB
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 735
• Conductor Number: 5
• Supplementary Article/Info 2: with fastening material
• Number of circuits: 5
• Name: EP 1.998.374
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 750
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Model Year to: 2015
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 6
• Cable Length [mm]: 805
• Weight [kg]: 0.121
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor, Oxygen Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV910

• Number of pins: 2
• Socket colour: beige
• for OE number: 03L906088EQ
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Regulating Sensor, Broadband oxygen sensor
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Oxygen Sensor: Regulating Sensor, Broadband oxygen sensor
• Number of pins: 5
• Cable Length [mm]: 570
• for OE number: 1K0998262AD
• Manufacturer: MEAT&DORIA

• Shape: straight
• Number of pins: 2
• Connector Shape: D Shape
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Cable Length [mm]: 620
• Manufacturer: VEMO GERMANY

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 735
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO
• Name: VA 368403

Oxygen Sensor: Planar probe, Broadband oxygen sensor, Thread pre-greased, Heated

• Cable Length [mm]: 100
• Number of pins: 5
• Fabrication Number: ENOX-VW-000
• Manufacturer: NTY

• Fitting Position: after catalytic converter
• Voltage [V]: 12
• Cable Length [mm]: 1,020
• Number of mounting bores: 2
• Number of pins: 5
• for OE number: 03L907807AE
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• Cable Length [mm]: 1,020
• Number of mounting bores: 2
• Number of pins: 5
• for OE number: 03L907807AF
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Shape: Square
• Number of mounting bores: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: oval
• Number of pins: 5
• Socket colour: black
• for OE number: 03L 907 807 AF
• Cable Length [mm]: 1,170
• Name: CZUJNIK NOX VW SHARAN 2.0TDI 13-
• Manufacturer: MAX

• Construction Year from: 10.2011
• Cable Length [mm]: 1,000
• Thread Size: M20X1,5
• Number of pins: 5
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PN358307001
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 1,000
• Number of pins: 5
• Manufacturer: OYODO

• Fitting Position: after catalytic converter
• Production date to: 10.10.2011
• Supplementary Article/Supplementary Info: with control unit
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: with cable
• Oxygen Sensor: Thread pre-greased
• Number of pins: 5
• Cable Length [mm]: 995
• Voltage [V]: 12
• Connector Shape: oval
• Number of mounting bores: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 1,000
• Number of pins: 5
• Thread Size: M20
• Connector Shape: oval
• Name: DE ANS1008-12B1
• Manufacturer: DELPHI

• Cable Length [mm]: 1,000
• Number of pins: 5
• Manufacturer: OYODO

• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Supplementary Info: with control unit
• Fitting Position: after catalytic converter
• Oxygen Sensor: Thread pre-greased
• Voltage [V]: 12
• Number of pins: 5
• Drive Type: All-wheel Drive
• Cable Length [mm]: 1,000
• Connector Shape: oval
• Number of mounting bores: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Shape: Square
• Number of mounting bores: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: oval
• Number of pins: 5
• Socket colour: black
• Cable Length [mm]: 1,170
• for OE number: 03L907807AF
• Name: NOx-sensor, NOx-katalsaator
• Manufacturer: MD

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Fitting Position: Rear
• General Information: NOx sensor; front; 12V
• Manufacturer: VIKA

• Voltage [V]: 12
• Cable Length [mm]: 1,000
• for OE number: 03L 907 807 AF
• Guarantee: 3 years guarantee
• Supplementary Article/Info 2: with cable
• Oxygen Sensor: Thread pre-greased
• Supplementary Article/Supplementary Info: with control unit
• Width [mm]: 140
• Height [mm]: 80
• Length [mm]: 230
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M20x1,5
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: after catalytic converter
• Production date from: 10.10.2011
• Model Year to: 2015
• Manufacturer: METZGER

• Fitting Position: after catalytic converter
• Production date to: 10.10.2011
• Number of pins: 5
• Cable Length [mm]: 995
• Product must be determined on the vehicle or the motor:
• for manufacturer number: 5WK9-6688A
• Observe service information:
• Observe the vehicle manufacturer specifications:
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.