• Installatsiooni pool: Esisild, esisild vasakul, esisild paremal
• Seerianumber: KLP-VW-018
• Manufacturer: NTY
• Name: NTY KLP-VW-018

Piirangutega toode/piirangu info 2: koos rattakeskmega, koos integreeritud ABS-anduriga

• Piirangutega toode/piirangu info 2: koos rattakeskmega
• Seerianumber: KLP-VW-022
• soovitava lisavarustuse artiklinumber: KLP-VW-022-Z
• Manufacturer: NTY
• Name: NTY KLP-VW-022

Installatsiooni pool: Esisild, esisild vasakul, esisild paremal, Tagasild

• Material: Metal
• Surface: Zinc-coated
• Name: GH 399961
• Manufacturer: AUTO-GH

Fitting Position: Front Axle, Front Axle Right, Front Axle Left, Lower Front Axle

• Length [mm]: 70
• External Thread [mm]: M16 x 1,5
• Bolt Head-/Nut Design: Female Star
• Quality/ Grade: 10.9
• Fitting Position: Rear Axle both sides
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Flange Diameter [mm]: 136.9
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Laagriteostus: Kuullaager
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 137
• Veljeaukude hulk: 5
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Hulk telje kohta: 2
• Veljeaukude hulk: 5
• Ava Ø (mm): 112
• Tsentri läbimõõt (mm): 32
• Manufacturer: TOPRAN

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos rasvakattega, koos kruviga Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter [mm]: 80
• Inner Diameter [mm]: 43
• Width [mm]: 38
• Manufacturer: METZGER

• Bolt Length [mm]: 59
• Fitting Position: Rear Axle
• Välisläbimõõt 2 [mm]: 136,9
• Kinnitusaukude hulk: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Construction Year to: 03.2016
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Siseläbimõõt 2 (mm): 32
• Manufacturer: GSP

• Fitting Position: Front Axle
• Laius (mm): 83
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 136,5
• Laius 2 (mm): 48
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Välisläbimõõt 2 [mm]: 81
• Siseläbimõõt 2 (mm): 51
• Kinnitusaukude hulk: 4
• Name: Rattalaagrikomplekt
• Manufacturer: OPT
• Additional information: 101017
• Lisainfo: 101017

• Fitting Position: Rear Axle
• Width [mm]: 67.7
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136.5
• Manufacturer: JPN

• Installatsiooni pool: Tagasild
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Siseläbimõõt 1 [mm]: 32
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Construction Year to: 03.2016
• Versioon: One
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Siseläbimõõt 2 (mm): 32
• Manufacturer: GSP

• Installatsiooni pool: Esisild
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt [mm]: 137
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Required quantity: 2
• Rim Hole Number: 5
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Flange Diameter [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle
• Laius (mm): 84
• Välisläbimõõt 2 [mm]: 137
• Kinnitusaukude hulk: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 137
• Ava Ø (mm): 112
• Hammastehulk ABS-rõngas: 86
• Veljeaukude hulk: 5
• Laagriteostus: Kuullaager
• Name: RATTARUMM
• Manufacturer: MEY

Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga, koos integreeritud magnetilise anduriga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle
• Laius (mm): 69
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 137
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT
• Additional information: 102019A
• Lisainfo: 102019A

• Fitting Position: Front Axle
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.72
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV010

• Fitting Position: Front Axle both sides
• Width [mm]: 84.5
• Inner Diameter [mm]: 27.5
• Outer Diameter [mm]: 136
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt [mm]: 136,5
• Siseläbimõõt [mm]: 32
• Laius (mm): 67,7
• SVHC: SVHS aineid ei esine
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Kaal (kg): 2,425
• pakendi pikkus [cm]: 16
• pakendi laius [cm]: 16
• pakendi kõrgus [cm]: 11
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt [mm]: 136,5
• Siseläbimõõt [mm]: 32
• Laius (mm): 67,7
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle Left, Front Axle Right
• Versioon: One
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• OE-numbri jaoks: 1K0407621C
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 136.9
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Installatsiooni pool: Esisild
• OE-numbri jaoks: 1T0 498 621 SK
• Välisläbimõõt [mm]: 136
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: >0316 # 0416>
• for OE number: 5QF598611
• Siseläbimõõt [mm]: 32
• Laius 1 (mm): 70
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Kinnitusaukude hulk: 5
• Name: DA KWD1005
• Manufacturer: DAYCO

• Engine Code: CZDA, DJKA
• Construction Year to: 03.2016
• Block Separation:
• Laius (mm): 70
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 136
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: kuullaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 2,366
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, Rattalaager on integreeritud rattarummu, koos rattakeskmega, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN): [;8P-4-162 000]
• Fitting Position: Right, Left, Rear Axle
• Aukude arv: 5
• Piirangutega toode/piirangu info 2: koos kummlaagriga
• Siseläbimõõt 1 [mm]: 32
• Välisläbimõõt 1 [mm]: 136
• Laius 1 (mm): 69
• Pöördenurk [°]: 180
• Väändejõud [Nm]: 200
• Manufacturer: SNR
• Name: SN R154.54

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Rim Hole Number: 5
• Manufacturer: IJS GROUP

• Aukude arv: 5
• Välisläbimõõt [mm]: 137
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Laius (mm): 69, 70
• Siseläbimõõt [mm]: 32
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Installatsiooni pool: Tagasild
• Kaal (kg): 2,549
• Manufacturer: VAICO

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos rattalaagriga Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Required quantity: 2
• Rim Hole Number: 5
• Manufacturer: DRIVE

• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 32
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

Supplementary Article/Info 2: with integrated magnetic sensor ring, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: CZDA, DJKA
• Construction Year to: 03.2016
• Block Separation:
• Laius (mm): 70
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 136
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: kuullaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 2,366
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Hooldusinfot jälgida:
• Name: SW 32 92 3320
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga, koos rattakeskmega Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Laius (mm): 69
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 137
• Kinnitusaukude vahe (mm): 112
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Netokaal [kg]: 2,44
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle
• Required quantity: 2
• Laius (mm): 69
• Siseläbimõõt [mm]: 32
• Ääriku läbimõõt [mm]: 136,9
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRRE LR+FR
• for OE number: 5K0498621
• Siseläbimõõt [mm]: 29
• Laius 1 (mm): 67
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Kinnitusaukude hulk: 5
• Name: DA KWD1001
• Manufacturer: DAYCO

• Piirangutega toode/piirangu info 2: koos rattalaagriga
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Lisainfo: Wheel Hub
• Additional information: Wheel Hub

• Fitting Position: Front Axle
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt [mm]: 27,5
• Välisläbimõõt [mm]: 136
• Ava Ø (mm): 112
• Veljeaukude hulk: 5
• Kinnitusviis: Neljapunktikinnitus
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Hammastehulk: 36
• Laagriteostus: Kuullaager
• Name: RATTARUMM
• Manufacturer: MEY

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos integreeritud rattalaagriga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Quantity: 2
• Fitting Position: Front Axle
• Number of Holes: 4
• General Information: wheel hub with bearing; 4holes
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Laius (mm): 83
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 81
• Kinnitusaukude vahe (mm): 112
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Keermemõõt: M14x1,5
• Veljeaukude hulk: 5
• Hammastehulk ABS-rõngas: 86
• Netokaal [kg]: 3,61
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle
• Kinnitusaukude hulk: 4
• Laius (mm): 48
• Siseläbimõõt [mm]: 27,5
• Välisläbimõõt [mm]: 85
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Välisläbimõõt 1 [mm]: 65
• Välisläbimõõt 2 [mm]: 136
• Kaal (kg): 3,12
• Manufacturer: FEBI

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• Kaal (kg): 3,913
• pakendi pikkus [cm]: 16
• pakendi laius [cm]: 16
• pakendi kõrgus [cm]: 11
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt [mm]: 137
• Veljeaukude hulk: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle Left, Front Axle Right
• Width [mm]: 55
• Manufacturer: FAST

• Fitting Position: Front Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt [mm]: 136,5
• Välisläbimõõt 2 [mm]: 65
• Välisläbimõõt 1 [mm]: 85
• Laius 2 (mm): 48
• Kinnitusaukude hulk: 4
• SVHC: SVHS aineid ei esine
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG
• Lisainfo: 713 6106 10 FAG
• Additional information: 713 6106 10 FAG

• Fitting Position: Front Axle
• Required quantity: 2
• Ääriku läbimõõt [mm]: 137
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKBA 3643 SKF
• Additional information: VKBA 3643 SKF

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 32
• Always compare old and new part (in particular OE No.):
• Manufacturer Restriction: Durchmesser beachten
• Outer Diameter [mm]: 137
• Width [mm]: 69.5
• Manufacturer: METZGER

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Fitting Position: Front Axle
• Kinnitusaukude hulk: 4
• Laius (mm): 48
• Siseläbimõõt [mm]: 27,5
• Välisläbimõõt [mm]: 85
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Välisläbimõõt 1 [mm]: 65
• Välisläbimõõt 2 [mm]: 136
• Kaal (kg): 3,12
• Name: SW 32 92 6377
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.