Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 28.5
- Seal Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Name: RONGASTIHEND
- Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Material: Plastic,
Aluminium - Core Length [mm]: 650
- Core Width [mm]: 402
- Core Depth [mm]: 27
- Manufacturer: JP GROUP
-
Lisainfo: Radiator,
engine cooling -
Additional information: Radiator,
engine cooling
- Name: Radiator
- Quality class: ZJ
Lisainfo: A3, 13- (kvaliteediklass Z)
- Name: Radiator
- Quality class: PJ
Lisainfo: A3, 13- (kvaliteediklass PJ)
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles without air conditioning
- Block Separation:
-
for PR number: 7LM,
9AC, KH6 - Material: Aluminium
- Core Length [mm]: 322
- Core Width [mm]: 650
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
-
Name: Radiaator,
mootorijahutus - Manufacturer: MAX
- Core Length [mm]: 650
- Core Width [mm]: 322
- Core Depth [mm]: 23
- Heating/Cooling: for vehicles with auxiliary cooler
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
-
Lisainfo: Radiator,
engine cooling -
Additional information: Radiator,
engine cooling
-
for PR number: 7LM,
9AC, KH6 - Block Separation:
- Vehicle Equipment: for vehicles without air conditioning
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 322
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 650*310*24
- Additional information: 650*310*24
- Core Depth [mm]: 22
- Core Width [mm]: 327
- Core Length [mm]: 650
- General Information: radiator; pipe enlarging
- Manufacturer: VIKA
- Vehicle Equipment: for vehicles without air conditioning
- Heating/Cooling: Auxiliary Radiator
- Block Separation:
-
for PR number: 7LM,
9AC, KH6 - Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 98
- Core Depth [mm]: 32
- Radiator type: Brazed cooling fins
-
Name: Radiaator,
kivitusaku - Manufacturer: NRF
- Core Length [mm]: 650
- Core Width [mm]: 328
- Core Depth [mm]: 32
- Radiator type: Brazed cooling fins
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Manufacturer: TYC OWIETLENIE
- Core Length [mm]: 651
- Core Width [mm]: 407
- Core Depth [mm]: 24
- Radiator type: Brazed cooling fins
- Inlet Ø [mm]: 32.3
- Outlet Ø [mm]: 32.3
- Weight [kg]: 2.522
- Packaging length [cm]: 81
- Packaging width [cm]: 49
- Packaging height [cm]: 15
- Manufacturer: AKSDASIS
- Vehicle Equipment: for vehicles without air conditioning
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 322
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Climate Zones: not for hot climate zones
-
for PR number: 9AK,
KH6 - Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 416
- Core Depth [mm]: 23
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Name: Radiaator,
mootorijahutus - Manufacturer: NRF
Vehicle Equipment: for vehicles with air conditioning, for vehicles with trailer hitch
- Cooling fins material: Aluminium
- Core Depth [mm]: 22
- Core Length [mm]: 647
- Core Width [mm]: 310
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 3 /
S 3 (8V) (12- ) 1.6 TDI -
Additional information: AUDI A 3 /
S 3 (8V) (12- ) 1.6 TDI
- Core Length [mm]: 620
- Core Width [mm]: 407
- Core Depth [mm]: 16
- Inlet Ø [mm]: 22
- Outlet Ø [mm]: 22
- Radiator type: Brazed cooling fins
- Packaging length [cm]: 82
- Packaging width [cm]: 52
- Packaging height [cm]: 17
- Weight [kg]: 2
- Heating/Cooling: Auxiliary Radiator
-
for PR number: 7LM,
9AC, KH6 - Block Separation:
- Climate Zones: not for hot climate zones
- Material: Aluminium
- Core Length [mm]: 620
- Core Width [mm]: 398
- Core Depth [mm]: 16
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 620*397*16
- Additional information: 620*397*16
Vehicle Equipment: for vehicles with air conditioning, for vehicles with trailer hitch
- Climate Zones: not for hot climate zones
-
for PR number: 9AK,
KH6 - Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 417
- Core Depth [mm]: 24
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Lisainfo: 650*402*27
- Additional information: 650*402*27
Vehicle Equipment: for vehicles with air conditioning, for vehicles with trailer hitch
- Climate Zones: not for hot climate zones
-
for PR number: 9AK,
KH6 - Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 650
- Core Width [mm]: 416
- Core Depth [mm]: 24
- Water Tank Material (radiator): Plastic
- Packaging height [cm]: 13.2
-
Net Weight [g]: 2,
679 - Packaging width [cm]: 50
- Packaging length [cm]: 82.5
- Name: MH CR2054001S
- Manufacturer: MAHLE
Vehicle Equipment: for vehicles with air conditioning, for vehicles with electr. auxiliary heater General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Quality class: PJ
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 322
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: without gasket/
seal - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 65317
-
Lisainfo: VOLKSWAGEN GOLF VII SPORTSVAN
(AM1) (14- ) 1.6 TDI -
Additional information: VOLKSWAGEN GOLF VII SPORTSVAN
(AM1) (14- ) 1.6 TDI
Technical Information: Radiator with 5mm system-Advanced technology with higher power effect
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 651
- Core Width [mm]: 415
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Block Separation:
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 651
- Core Width [mm]: 415
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
Vehicle Equipment: for vehicles with air conditioning, for vehicles without trailer hitch
-
for PR number: 7LM,
9AC, KH6 - Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 650
- Core Width [mm]: 322
- Core Depth [mm]: 23
- Water Tank Material (radiator): Plastic
- Packaging height [cm]: 11.5
-
Net Weight [g]: 2,
008 - Packaging width [cm]: 45
- Packaging length [cm]: 83.5
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
Vehicle Equipment: for vehicles without air conditioning, for vehicles with/without air conditioning General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Cooling fins material: Aluminium
- Core Depth [mm]: 22
- Core Length [mm]: 650
- Core Width [mm]: 438
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 606218
-
Lisainfo: SEAT LEON
(5F) (12- ) 1.2 TSI -
Additional information: SEAT LEON
(5F) (12- ) 1.2 TSI
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 648
- Core Width [mm]: 96
- Inlet Ø [mm]: 22.3
- Outlet Ø [mm]: 22.3
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
-
Name: EGR-
jahuti, turbo vahejahuti - Manufacturer: NIS
-
Lisainfo: VOLKSWAGEN GOLF VII SPORTSVAN
(AM1) (14- ) 1.6 TDI -
Additional information: VOLKSWAGEN GOLF VII SPORTSVAN
(AM1) (14- ) 1.6 TDI
-
Engine Code: CXXB,
DBKA -
Transmission Type: 6-
Speed Manual Transmission - Core Width [mm]: 411
- Core Length [mm]: 650
- Core Depth [mm]: 24
- Material: Aluminium
- Inlet Ø [mm]: 33
- Outlet Ø [mm]: 33
- Heating/Cooling: for vehicles without oil cooler
- Radiator type: Mechanically jointed cooling fins
- Weight [kg]: 3.54
- Manufacturer: VALEO
- Additional information: 735558 VALEO
- Lisainfo: 735558 VALEO
- Cooling fins material: Aluminium
- Core Depth [mm]: 22
- Core Length [mm]: 650
- Core Width [mm]: 396
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: VOLKSWAGEN PASSAT B8
(3G2, 3G5) (14- ) 1.4 TSI -
Additional information: VOLKSWAGEN PASSAT B8
(3G2, 3G5) (14- ) 1.4 TSI
Technical Information: Radiator with 5mm system-Advanced technology with higher power effect
- Climate Zones: not for hot climate zones
-
for PR number: 9AK,
KH6 - Radiator type: Brazed cooling fins
- Core Length [mm]: 650
- Core Width [mm]: 395
- Core Depth [mm]: 22
- Water Tank Material (radiator): Plastic
- Packaging height [cm]: 13.5
-
Net Weight [g]: 3,
058 - Packaging width [cm]: 50.5
- Packaging length [cm]: 84
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
Vehicle Equipment: for vehicles with air conditioning, for vehicles with electr. auxiliary heater General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Name: Radiator
- Quality class: Q
Lisainfo: "Tootja: OEM/OES (VALEO)
A3, 13-
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks