• Fitting Position: Front Axle
• for PR number: 1LG, 1ZA, 1ZB
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Outer Diameter 2 [mm]: 65
• Outer Diameter 1 [mm]: 85
• Width 2 [mm]: 48
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610980
• Lisainfo: 713 6109 80 FAG
• Additional information: 713 6109 80 FAG

• Length [mm]: 70
• External Thread [mm]: M16 x 1,5
• Bolt Head-/Nut Design: Female Star
• Quality/ Grade: 10.9
• Fitting Position: Rear Axle both sides
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Inner Diameter [mm]: 30
• Supplementary Article/Info 2: with wheel hub
• Fabrication Number: KLT-VW-013
• Manufacturer: NTY
• Name: NTY KLT-VW-013

Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Front Axle

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 2.23
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV011

• Fitting Position: Rear Axle
• Flange Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 68
• Inner Diameter [mm]: 30
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Internal Toothing wheel side: 30
• Outer Diameter 2 [mm]: 136.5
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• for PR number: 0N4
• Axle: Multi-link Axle
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 32
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Width [mm]: 67.8
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Manufacturer: JPN
• Lisainfo: 20L9013-JPN
• Additional information: 20L9013-JPN

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Manufacturer: JP-GROUP
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• for PR number: 0N1
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Rim Hole Number: 5
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 30
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with grease cap, with screw General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 30
• Manufacturer: GSP
• Additional information: 9230082
• Lisainfo: 9230082

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Inner Diameter 1 [mm]: 32
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• for PR number: 0N4
• Axle: Multi-link Axle
• Version: One
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 32
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Inner Diameter [mm]: 30
• Flange Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2.2
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 68.5
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Name: Wheel hub
• Quality class: PJ

Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"Tagaratta laager.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Inner Diameter 2 [mm]: 30
• Manufacturer: GSP

Supplementary Article/Info 2: with bolts/screws, with integrated ABS sensor, with cover

• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2.366
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Flange Diameter [mm]: 136
• Supplementary Article/Info 2: with integrated ABS sensor, with bolts/screws
• Outer Diameter 1 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288
• Width [mm]: 84
• Outer Diameter 2 [mm]: 136
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.39
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV040

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: >0117 # 0217> , >
• for OE number: 5WA501611
• Inner Diameter [mm]: 30
• Width 1 [mm]: 68
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 5
• Name: DA KWD1002
• Manufacturer: DAYCO

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: REAR LR+RE LR+RE
• for OE number: 8S0598611
• Inner Diameter [mm]: 32
• Width 1 [mm]: 70
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 5
• Name: DA KWD1005
• Manufacturer: DAYCO

• Fitting Position: Front Axle Left, Front Axle Right
• for PR number: 1ZE, 1ZF, 1ZH
• Rim Hole Number: 5
• Quantity per axle: 2
• Number of flange connections: 3
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with bolts/screws, with integrated magnetic sensor ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Right, Left, Rear Axle
• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 136
• Width 1 [mm]: 69
• Rotation angle [°]: 180
• Tightening Torque [Nm]: 200
• Manufacturer: SNR
• Name: SN R154.54

• Fitting Position: Front Axle
• Flange Diameter [mm]: 136.4
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 85
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Outer Diameter [mm]: 85
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-023
• Manufacturer: NTY
• Name: NTY KLP-VW-023

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Fitting Position: Front Axle
• for OE number: 1K0498621
• Outer Diameter [mm]: 136
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Number of mounting bores: 3
• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 30
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

Supplementary Article/Info 2: with integrated magnetic sensor ring, with fastening material, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Width [mm]: 68.2
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Tightening Torque [Nm]: 180
• Rotation angle [°]: 180
• Manufacturer: OPTIMAL

• Width [mm]: 68
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 136
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 30 94 0659
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 312
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with integrated ABS sensor
• Rim Hole Number: 5
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 288
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 288
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with bolts/screws, with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP
• Additional information: 9336004K
• Lisainfo: 9336004K

• Fitting Position: Front Axle
• Outer Diameter [mm]: 136.4
• Width 2 [mm]: 48.1
• Outer Diameter 1 [mm]: 80
• Outer Diameter 2 [mm]: 65
• Number of mounting bores: 3
• Manufacturer: JPN

• Fitting Position: Rear
• General Information: wheelhub with bearing; rear
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Required quantity: 2
• Weight [kg]: 2.258
• Packaging length [cm]: 15.6
• Packaging width [cm]: 15.4
• Packaging height [cm]: 10.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 30
• Width [mm]: 68
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 136.4
• Outer Diameter 1 [mm]: 85
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Vehicle Identification Number (VIN): [8P-4-162 001;]
• Inner Diameter 1 [mm]: 30
• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Number of pins: 43
• Rotation angle [°]: 180
• Tightening Torque [Nm]: 180
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN R154.55

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 30
• Width [mm]: 67.8
• SVHC: No SVHC present!
• Name: LU 713610960
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Required quantity: 2
• Width [mm]: 68
• Inner Diameter [mm]: 30
• Flange Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: SKF
• Name: SK VKBA3656
• Lisainfo: VKBA 3656 SKF
• Additional information: VKBA 3656 SKF

• Fitting Position: Rear
• Supplementary Article/Info 2: with bolts
• General Information: wheelhub with bearing; rear; with screws
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Required quantity: 2
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Outer Diameter 2 [mm]: 136
• Manufacturer: KAVO

• Fitting Position: Front Axle Left, Front Axle Right, Front Axle
• for brake disc diameter [mm]: 312, 340
• Block Separation:
• Outer Diameter [mm]: 136
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.45
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV264
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Required quantity: 2
• Weight [kg]: 3.273
• Packaging length [cm]: 16
• Packaging width [cm]: 16
• Packaging height [cm]: 11
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 136
• Outer Diameter 2 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 276, 288
• for PR number: 1ZE, 1ZF, 1ZH
• Width [mm]: 83
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 136.5, 80
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of mounting bores: 3
• Number of Teeth on input shaft: 36
• Manufacturer: OPTIMAL

• Fitting Position: Front
• General Information: wheel hub with bearing; front
• Manufacturer: BORSEHUNG
• Lisainfo: B19118
• Additional information: B19118

• Fitting Position: Rear Axle
• Width [mm]: 80
• Manufacturer: FAST

• Fitting Position: Front Axle Left, Front Axle Right
• Version: Three
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP

• Fitting Position: Front Axle
• Number of Holes: 3
• Weight [kg]: 0.765
• Supplementary Article/Info 2: without bolts
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 80
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; front; without bolts
• Manufacturer: VIKA

• Fitting Position: Right, Left, Front Axle
• Supplementary Article/Info 2: with rubber mount
• Rim Hole Number: 5
• Mounting Type: Clamped
• Tightening Torque [Nm]: 200
• Rotation angle [°]: 180
• Manufacturer: SNR
• Name: SN R154.61

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 312, 340
• for PR number: 1LG, 1ZA, 1ZB
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 137, 85
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of mounting bores: 3
• Number of Teeth on input shaft: 36
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Thickness [mm]: 85
• Weight [kg]: 3.08
• Supplementary Article/Info 2: without bolts
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 137
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 137
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; front; without bolts
• Manufacturer: VIKA

• Fitting Position: Right, Left, Rear Axle, Front Axle
• Inner Diameter 1 [mm]: 28
• Width 1 [mm]: 84
• Outer Diameter 1 [mm]: 136
• Tightening Torque [Nm]: 200
• Rotation angle [°]: 180
• Manufacturer: SNR
• Name: SN R154.69

• Fitting Position: Front Axle
• Required quantity: 2
• Flange Diameter [mm]: 136
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Manufacturer: SKF
• Name: SK VKBA6556
• Lisainfo: VKBA 6556 SKF
• Additional information: VKBA 6556 SKF

• Fitting Position: Front Axle
• for PR number: 1LG, 1ZA, 1ZB
• Weight [kg]: 3.483
• Packaging length [cm]: 15.6
• Packaging width [cm]: 15.6
• Packaging height [cm]: 9.6
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 136.5
• Outer Diameter 1 [mm]: 85
• Outer Diameter 2 [mm]: 65
• Width 2 [mm]: 48
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 136
• Outer Diameter 1 [mm]: 80
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle
• Required quantity: 2
• Flange Diameter [mm]: 136.4
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 85
• Manufacturer: SKF
• Name: SK VKBA7011
• Lisainfo: VKBA 7011 SKF
• Additional information: VKBA 7011 SKF

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.4
• Outer Diameter 2 [mm]: 65
• Outer Diameter 1 [mm]: 80
• Width 2 [mm]: 48.1
• Number of mounting bores: 3
• SVHC: No SVHC present!
• Name: LU 713610990
• Manufacturer: FAG

• Fitting Position: Front
• Supplementary Article/Info 2: with bolts
• General Information: wheelhub with bearing; front; with screws
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH, 1ZJ
• Width [mm]: 48
• Thickness [mm]: 84
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 80
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 65
• Outer Diameter 2 [mm]: 137
• Weight [kg]: 3.17
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH, 1ZJ
• Width [mm]: 48
• Thickness [mm]: 84
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 80
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 65
• Outer Diameter 2 [mm]: 137
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 30 94 6334
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for PR number: 1LG, 1ZA, 1ZB
• Observe dimensions:
• Outer Diameter 1 [mm]: 85
• Outer Diameter 2 [mm]: 136
• Manufacturer: METZGER

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring