Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Length [mm]: 107
- Outer Diameter [mm]: 35
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 41
- Spanner Size: 18
- Screw length below head [mm]: 97
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.1
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: JP GROUP
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
-
Axle: Four-
Link Axle
- Fitting Position: Front Axle
- General Information: Spring support; front spring disc
- Manufacturer: BORSEHUNG
- Fitting Position: Rear Axle
- General Information: spring support; down
- Manufacturer: BORSEHUNG
- Quantity per packing unit: 5
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Upper,
both sides - Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Screw length below head [mm]: 82
- Overall Length [mm]: 94
- Bolt Head-/Nut Design: Male Hex
- Surface: Zink flake coated
- Strength class: 10.9
- Axle: Independent wheel suspension
- Name: Rattakalde korrektuurkruvi
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: ZWT-
VW- 034SK - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Model Year from: 2013
- Weight [kg]: 0.127
- Packaging length [cm]: 10.1
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.6
- Manufacturer: FEBEST
- for PR number: 0N4
- Model Year from: 2013
- Weight [kg]: 0.107
- Packaging length [cm]: 9.2
- Packaging width [cm]: 3.4
- Packaging height [cm]: 3.4
- Manufacturer: FEBEST
- for PR number: 0N4
- Model Year from: 2013
- Weight [kg]: 0.23
- Packaging length [cm]: 12.8
- Packaging width [cm]: 3.5
- Packaging height [cm]: 3.5
- Manufacturer: FEBEST
-
Lisainfo: 2398-
007- KIT FEBEST -
Additional information: 2398-
007- KIT FEBEST
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Upper,
both sides - Thread Size: M 12
- Screw length below head [mm]: 82
- Overall Length [mm]: 94
- Strength class: 10.9
- Axle: Independent wheel suspension
-
Supplementary Article/Info 2: with nut,
with protect screen - Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
- Model Year from: 2013
-
for combined PR number: UC7,
UC8 - Fitting Position: Rear Axle
- Diameter [mm]: 14
- Weight [kg]: 0.2
- Packaging length [cm]: 20
- Packaging width [cm]: 6.5
- Packaging height [cm]: 6.5
- Manufacturer: FEBEST
-
not for PR number: 2UB,
2UF - Height [mm]: 70
- Weight [kg]: 0.117
- Fitting Position: Front Axle
- Required quantity: 2
- Name: TG TED58322
- Manufacturer: TEDGUM
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Lower,
both sides - Thread Size: M 12
- Screw length below head [mm]: 97
- Overall Length [mm]: 109
- Strength class: 10.9
- Axle: Independent wheel suspension
- Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
- Length [mm]: 92.2
- Outer Diameter [mm]: 35
-
External Thread Size: M12 x 1,
5 - Spanner Size: 18
- Shaft Length [mm]: 32.8
- Screw length below head [mm]: 81
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.136
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Supplementary Article/Info 2: with protective cap/
bellow - Required quantity: 2
- Weight [kg]: 0.124
- Fitting Position: Front Axle
- Manufacturer: TEDGUM
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right - Axle: Independent wheel suspension
- Suspension: for vehicles without electronic suspension control
- Name: COC 49495773
- Manufacturer: CORTECO
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: AB-
VW- 026K - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Model Year from: 2013
-
for combined PR number: UC7,
UC8 - Fitting Position: Rear Axle
- Diameter [mm]: 14
- Weight [kg]: 0.195
- reinforced version:
- Packaging length [cm]: 19.5
- Packaging width [cm]: 6.5
- Packaging height [cm]: 6.5
- Manufacturer: FEBEST
- Suspension: for vehicles with sports suspension
- only in connection with: 803010
-
Axle: Twist-
beam Rear Axle - Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [g]: 247
- Manufacturer: METALCAUCHO
- for PR number: 0N4
- Model Year from: 2013
- Weight [kg]: 0.141
- Packaging length [cm]: 10.7
- Packaging width [cm]: 3.4
- Packaging height [cm]: 3.4
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Quantity per axle: 2
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Suspension: for vehicles with bad road version
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: AD-
VW- 034 - Manufacturer: NTY
-
Name: NTY AD-
VW- 034
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Quantity: 1,
2 - Construction Year from: 05.2015
- Construction Year to: 05.2015
- Fitting Position: Front Axle
- General Information: Rubber and dust cover kit; front
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Lisainfo: Top Strut Mounting
- Additional information: Top Strut Mounting
- Suspension: for vehicles with sports suspension
- only in connection with: 803010
-
Axle: Four-
Link Axle - Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Fitting Position: Rear Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
-
Fitting Position: Front Axle,
Front Axle both sides - Suspension: for vehicles with standard suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
- Fitting Position: Rear Axle
- only in connection with: 803 010
- Block Separation:
- Manufacturer: JP GROUP
Suspension: for vehicles with standard suspension, for vehicles with bad road version
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: AD-
VW- 035 - Supplementary Article/Info 2: without bearing
- Manufacturer: NTY
-
Name: NTY AD-
VW- 035
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: AD-
VW- 033 - Manufacturer: NTY
-
Name: NTY AD-
VW- 033
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Width [mm]: 127
- Thickness [mm]: 40
- Inner Diameter [mm]: 78
- Outer Diameter [mm]: 127
-
Material: Plastic,
Metal - Bearing Type: Rolling Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.31
- Manufacturer: FEB
- Lisainfo: 44799 FEBI
- Additional information: 44799 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR
- for OE number: 5Q0511357Q
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [g]: 227
- Component Number: 2
- Name: IM 50341
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
-
Mounting Type: Rubber-
Metal Mount - Required quantity: 2
- replacement in pairs recommended:
- Name: Vedruamordi tugilaager
- Manufacturer: MEY
- for OE number: 5Q0511357F
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [g]: 229
- Component Number: 2
- Name: IM 51039
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Inner Diameter [mm]: 78
- Outer Diameter [mm]: 127
- Height [mm]: 40
- Bearing Type: Ball Bearing
-
Name: Laager -
Kndmik VW P. AUDI, SKODA - Manufacturer: MEY
- Lisainfo: 1006410020
- Additional information: 1006410020
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
-
Axle: Twist-
beam Rear Axle
- Required quantity: 2
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
- Weight [kg]: 0.415
- Manufacturer: TEDGUM
- Name: TG TED22900
- Fitting Position: Front Axle
- Quantity per axle: 2
-
Name: Laager,
amorditugilaager - Manufacturer: SKF
- Inner Diameter [mm]: 14
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!BEZ O½YSKA!!!
- Construction Year from: 06.2015
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Quantity: 2
- Manufacturer: KAVO PARTS
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MEY
- Engine Code: CJZB
-
Material: Plastic,
Metal - Bearing Type: Rolling Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter [mm]: 127
- Inner Diameter [mm]: 78
-
Name: Laager,
amorditugilaager - Manufacturer: MAX
- Suspension: for vehicles with standard suspension
- only in connection with: 803010
- Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Fitting Position: Front Axle
- Inner Diameter [mm]: 78.5
- Outer Diameter [mm]: 127.5
- Bearing Type: Ball Bearing
- SVHC: No SVHC present!
-
Manufacturer: FAG-
ELEMENTY ZAWIESZENIA
- Fitting Position: Front Axle
-
for OE number: 1K0412303B,
1K0412303AA - Manufacturer: KAMOKA AMORTYZATORY
- Additional information: 2019212 KAMOKA
- Lisainfo: 2019212 KAMOKA
- Fitting Position: Rear Axle both sides
- Thickness [mm]: 60
- Weight [kg]: 0.34
- Required quantity: 2
- Material: Aluminium
- Inner Diameter [mm]: 10
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Alternative Repair Kit: 37574 01
- Manufacturer: LEMFORDER
- Name: LMI 3695101
for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Alternative Repair Kit: 803 024
- Name: Vedruamordi tugilaager
- Manufacturer: SAA
for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C
- Suspension: for vehicles with bad road version
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Article number of recommended accessories: 532865,
531430 - Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Alternative Repair Kit: 118 038
- Quantity per axle: 2
- Consult accessories list for recommended additional repairs:
- Supplementary Article/Info 2: without rolling bearing
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.392
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity: 2
- Construction Year from: 05.2015
- Construction Year to: 05.2015
- Fitting Position: Front Axle
- General Information: Rubber and dust cover kit; front
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Suspension: for vehicles with increased ground clearance
- Construction Year to: 05.2015
- Weight [kg]: 0.4
- Manufacturer: DENCKERMANN AMORTYZATORY
- Inner Diameter [mm]: 14
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- Supplementary Article/Info 2: without ball bearing
- Name: SW 30 94 0171
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Suspension: for vehicles without sports suspension
- Quantity per packing unit: 2
- Quantity: 2
- Manufacturer: KAVO PARTS
- Fitting Position: Rear Axle
- Weight [kg]: 0.34
- Required quantity: 2
- Thickness [mm]: 60
- Inner Diameter [mm]: 10
- Material: Aluminium
-
Mounting Type: Rubber-
Metal Mount - General Information: Shock absorber upper cover
- Manufacturer: VIKA
-
Quantity: 1,
2 - Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
-
Lisainfo: 5Q0511357H/
KPL VIKA -
Additional information: 5Q0511357H/
KPL VIKA
- Fitting Position: Front Axle
- for OE number: 1K0412303AA
- Manufacturer: KAMOKA AMORTYZATORY
-
Quantity: 1,
2 - Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- Inner Diameter [mm]: 14
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
- for PR number: G02
- Model Year from: 2013
- for OE number: 1K0412303E
- Fitting Position: Front Axle
- Weight [kg]: 0.288
- Packaging length [cm]: 20
- Packaging width [cm]: 15.6
- Packaging height [cm]: 7.8
- Manufacturer: FEBEST
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
- Axle: Rigid Axle
- Length [mm]: 133
-
Material: PU
(Polyurethane), Thermoplast - Fitting Position: Rear Axle
- Weight [kg]: 0.392
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
- Additional information: FE175365
- Lisainfo: FE175365
Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA AMORTYZATORY
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
for OE number: 5Q0 412 249 E,
5Q0 412 249 F - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Laager - Kndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
for OE number: 5Q0 412 249 E,
5Q0 412 249 F -
Name: Laager,
amorditugilaager - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Model Year from: 2013
- Fitting Position: Front Axle
- Weight [kg]: 0.33
- Packaging length [cm]: 12.7
- Packaging width [cm]: 12.7
- Packaging height [cm]: 3.8
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Manufacturer: MAX
Name: ZESTAW MONTA½OWY AMORTYZATORA P. GLOF/OCTAVIA 06- (ODBOJEONY)
-
Production date from: 11/
12 - Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
- for OE number: 5Q0412331F
- Manufacturer: SASIC
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Aluminium
- Weight [g]: 431
- Thickness [mm]: 60
- Inner Diameter [mm]: 10
- Name: IM 37975
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Observe dimensions:
- Support plate diameter [mm]: 10.2
- Quantity per axle: 2
- Housing diameter pressure stop [mm]: 60.5
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LMI
for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B Name: Laager - Kndmik. VW T. LEON/GOLF VII/SPORTSVAN/OCTAVIA 12- LE/PR
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- only in connection with: 803 010
-
Axle: Twist-
beam Rear Axle -
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: SAA
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
- Fitting Position: Front Axle
- SVHC: No SVHC present!
- Name: LU 814018310
- Manufacturer: FAG
-
Production date from: 01/
13 -
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear Axle
- Inner Diameter [mm]: 60
- for OE number: 5Q0513353G
- Manufacturer: SASIC
-
Fitting Position: Front Axle Right,
Front Axle Left - Mounting Type: Rubber Mount
- Length [mm]: 41.2
- Weight [kg]: 0.798
- Inner Diameter [mm]: 14.1
- Manufacturer: RTS
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
- Quantity: 2
- Weight [kg]: 0.8
- Fitting Position: Front Axle
- Required quantity: 2
- Inner Diameter [mm]: 14
-
Mounting Type: Rubber-
Metal Mount - Supplementary Article/Info 2: without ball bearing
- General Information: Shock absorber top rubber; front
- Manufacturer: BORSEHUNG
- Fitting Position: Rear Axle
- Manufacturer: KAVO PARTS
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MEY
Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- only in connection with: 803 010
-
Axle: Four-
Link Axle - Manufacturer: SACHS
- Fitting Position: Rear Axle
- Suspension: for vehicles without sports suspension
- Weight [kg]: 0.4
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- Suspension: for vehicles with bad road version
- Required quantity: 1
- Manufacturer: SACHS
- Quantity: 2
- Thickness [mm]: 40
- Width [mm]: 127
- Weight [kg]: 0.31
- Bearing Type: Rolling Bearing
- Inner Diameter [mm]: 78
- Outer Diameter [mm]: 127
-
Material: Plastic,
Metal - Required quantity: 2
- Fitting Position: Front Axle
- General Information: deep groove ball thrust bearing; front
- Manufacturer: BORSEHUNG
- Suspension: for vehicles without electronic suspension control
- for PR number: G09
- Fitting Position: Front Axle
- Weight [kg]: 0.376
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 06.2015
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Weight [kg]: 0.337
- Guarantee: 5 years guarantee
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Quantity: 2
- Construction Year from: 05.2015
- Construction Year to: 05.2015
- Fitting Position: Front Axle
- Weight [kg]: 0.8
- Required quantity: 2
- Inner Diameter [mm]: 14
-
Mounting Type: Rubber-
Metal Mount - Supplementary Article/Info 2: without ball bearing
- General Information: Shock absorber top rubber; front
- Manufacturer: VIKA
- for OE number: 5Q0412249C
- Fitting Position: Front Axle
-
Weight [g]: 1,
123 - Supplementary Article/Info 2: with ball bearing
- Component Number: 2
- Bearing manufacturer: IMPERGOM
-
Name: Remondikomplekt,
vedruamordi tugilaager - Manufacturer: IMP
- Axle: Rigid Axle
- Block Separation:
- for PR number: UC8
- Fitting Position: Rear Axle
- Weight [kg]: 0.256
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
Suspension: for vehicles with lifted suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 02.2014
-
Vehicle Identification Number (VIN) from: 5E-
D- 000 001 -
Vehicle Identification Number (VIN) to: 5E-
8J006446 - Axle: Rigid Axle
- Suspension: for vehicles without lowered suspension
- for PR number: 7ZV
- Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
-
Name: BI 11-
305934 - Quality class: Q
- Quantity: 2
- Fitting Position: Front Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; front; 2 pcs
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Quantity: 2
- Fitting Position: Rear Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; rear; 2 pcs
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: MEY
Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!
- for PR number: G05
- for combined PR number: G02+2UC
- Length [mm]: 172
- Width [mm]: 74
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.216
-
Name: Puhver,
vedrustus - Manufacturer: FEB
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Remondikomplekt,
vedruamordi tugilaager - Manufacturer: MAX
- Quantity: 2
- Fitting Position: Front Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; front; 2 pcs
- Manufacturer: BORSEHUNG
- Quantity: 2
- Fitting Position: Rear Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; rear; 2 pcs
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Quantity per axle: 2
- General Information: SKF recommends always changing in pairs both sides
- Manufacturer: SKF
Name: PODUSZKA AMORT. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- Z O½YSKIEM
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with rolling bearing
- Quantity per axle: 2
- Replace in pairs only:
- for components see parts list:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!
-
Axle: Multi-
link Axle -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.402
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: CJZB,
CYVA -
for combined PR number: G02+2UB,
G02+2UF - Block Separation:
-
for PR number: G06,
G08 -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.335
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
Suspension: for vehicles with heavy duty suspension, for vehicles with lifted suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Axle: Multi-
link Axle - Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Height of bump stop [mm]: 127
- Manufacturer: KYB
- Additional information: 910332 KYB
- Lisainfo: 910332 KYB
Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Manufacturer: BILSTEIN
-
Name: BI 12-
243945 - Quality class: Q
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 14
- Supplementary Article/Info 2: with ball bearing
- Weight [kg]: 1.066
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CJZB
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.1
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: BIL
- Quality class: Q
Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- LE/PR LE/PR B1
- Fitting Position: Rear Axle
- Suspension: for vehicles without sports suspension
- Quantity per packing unit: 2
- Weight [kg]: 0.473
- Guarantee: 5 years guarantee
- Packaging length [cm]: 9.5
- Packaging width [cm]: 30
- Packaging height [cm]: 18
- Manufacturer: MONROE ODBOJE I OSLONY
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP ZAWIESZENIE
- Fitting Position: Front Axle
- Name: KY SM1051
- Manufacturer: KYB
Technical Information: Suspension mounting (x1), separated bearing (x1) / / / Fastenings : piston rod nut (x1), suspension mounting bolt/screw (x3)
- Engine Code: CJZB
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.3
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Weight [kg]: 1.3
- Supplementary Article/Info 2: with rolling bearing
- Guarantee: 5 years guarantee
- Packaging length [cm]: 15.1
- Packaging width [cm]: 8.4
- Packaging height [cm]: 14.6
- Manufacturer: MONROE
- Engine Code: CJZB
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.3
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Name: SW 30 94 5497
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 2
- Fitting Position: Front Axle
- General Information: Shock absorber rubber kit; front
- Manufacturer: BORSEHUNG
-
Vehicle Identification Number (VIN) from: 5E-
D- 000 001 - Fitting Position: Front Axle both sides
- Weight [kg]: 1.1
- Inner Diameter [mm]: 14
- Supplementary Article/Info 2: with rolling bearing
- Manufacturer: METALCAUCHO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks