• Installatsiooni pool: Esisild
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga
• Manufacturer: JP GROUP
• Lisainfo: Wheel Hub
• Additional information: Wheel Hub

• Fitting Position: Front Axle
• for PR number: 1LG, 1ZA, 1ZB
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt [mm]: 136,5
• Välisläbimõõt 2 [mm]: 65
• Välisläbimõõt 1 [mm]: 85
• Laius 2 (mm): 48
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 713610980
• Lisainfo: 713 6109 80 FAG
• Additional information: 713 6109 80 FAG

• Length [mm]: 70
• External Thread [mm]: M16 x 1,5
• Bolt Head-/Nut Design: Female Star
• Quality/ Grade: 10.9
• Fitting Position: Rear Axle both sides
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Inner Diameter [mm]: 30
• Supplementary Article/Info 2: with wheel hub
• Fabrication Number: KLT-VW-013
• Manufacturer: NTY
• Name: NTY KLT-VW-013

Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Front Axle

• Fitting Position: Rear Axle
• Flange Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 68
• Inner Diameter [mm]: 30
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 2.23
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV011

• Fitting Position: Rear Axle
• Engine Code: CUPA
• Sisehambumus rattapool: 30
• Välisläbimõõt 2 [mm]: 136,5
• Kinnitusaukude hulk: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Siseläbimõõt 2 (mm): 32
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Width [mm]: 67.8
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Manufacturer: JPN

• Installatsiooni pool: Tagasild
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Construction Year to: 01.2017
• Fitting Position: Rear Axle Left, Rear Axle Right
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga
• Veljeaukude hulk: 5
• Manufacturer: JP-GROUP
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• Fitting Position: Rear Axle Left, Rear Axle Right
• Construction Year to: 01.2017
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Siseläbimõõt 2 (mm): 30
• Manufacturer: GSP
• Additional information: 9230082
• Lisainfo: 9230082

• for PR number: 0N1
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Hulk telje kohta: 2
• Veljeaukude hulk: 5
• Välisläbimõõt [mm]: 136
• Ava Ø (mm): 112
• Tsentri läbimõõt (mm): 30
• Manufacturer: TOPRAN

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos rasvakattega, koos kruviga Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Siseläbimõõt 1 [mm]: 32
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Versioon: One
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Siseläbimõõt 2 (mm): 32
• Manufacturer: GSP

• Quantity: 2
• Fitting Position: Rear Axle
• Thickness [mm]: 68
• Number of Holes: 5
• Weight [kg]: 1.91
• Supplementary Article/Info 2: without bolts
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 136
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2.2
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 68.5
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Inner Diameter [mm]: 30
• Flange Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Name: Wheel hub
• Quality class: PJ

Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"Tagaratta laager.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Construction Year to: 01.2017
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Siseläbimõõt 2 (mm): 30
• Manufacturer: GSP

Piirangutega toode/piirangu info 2: koos kruvidega, koos integreeritud ABS-anduriga, koos kattega

• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2.366
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Flange Diameter [mm]: 136
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.39
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV040

• Laius (mm): 68
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 79
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: kuullaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Välisläbimõõt 1 [mm]: 136
• Kaal (kg): 1,91
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Manufacturer: FEBI BILSTEIN

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga, koos rattakeskmega Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: >0117 # 0217> , >
• for OE number: 5WA501611
• Siseläbimõõt [mm]: 30
• Laius 1 (mm): 68
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Kinnitusaukude hulk: 5
• Name: DA KWD1002
• Manufacturer: DAYCO

• Fitting Position: Front Axle
• Flange Diameter [mm]: 136
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• for PR number: 1ZE, 1ZF, 1ZH
• Veljeaukude hulk: 5
• Hulk telje kohta: 2
• Flantsiühenduste arv: 3
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Ava Ø (mm): 112
• Manufacturer: TOPRAN

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos kruvidega, koos integreeritud magnetilise anduriga Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Outer Diameter [mm]: 85
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-023
• Manufacturer: NTY
• Name: NTY KLP-VW-023

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: REAR LR+RE
• for OE number: 8S0598611
• Siseläbimõõt [mm]: 32
• Laius 1 (mm): 70
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Kinnitusaukude hulk: 5
• Name: DA KWD1005
• Manufacturer: DAYCO

• Number of mounting bores: 3
• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 30
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

Supplementary Article/Info 2: with integrated magnetic sensor ring, with fastening material, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Esisild
• Välisläbimõõt [mm]: 136
• OE-numbri jaoks: 1K0498621
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Laius (mm): 68
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 79
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: kuullaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Välisläbimõõt 1 [mm]: 136
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Name: SW 30 94 0659
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos rattakeskmega, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Laius (mm): 68,2
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 136,5
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Väändejõud [Nm]: 180
• Pöördenurk [°]: 180
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Outer Diameter [mm]: 136.4
• Width 2 [mm]: 48.1
• Outer Diameter 1 [mm]: 80
• Outer Diameter 2 [mm]: 65
• Number of mounting bores: 3
• Manufacturer: JPN

• for brake disc diameter [mm]: 312
• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Veljeaukude hulk: 5
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 288
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• OE-numbri jaoks: 1K0407621D
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Hammastehulk: 36
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 288
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• OE-numbri jaoks: 1K0407621D
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos kruvidega, koos integreeritud ABS-anduriga
• Hammastehulk: 36
• Manufacturer: GSP
• Additional information: 9336004K
• Lisainfo: 9336004K

• Installatsiooni pool: taga
• Üldine informatsioon: wheelhub with bearing; rear
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 312
• Laius (mm): 84
• Sisehambumus rattapool: 36
• Välisläbimõõt 2 [mm]: 136,4
• Kinnitusaukude hulk: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Engine Code: CUNA, CUPA
• Fitting Position: Front Axle both sides
• Thickness [mm]: 85
• Width [mm]: 137
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 137
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Kaal (kg): 2,258
• pakendi pikkus [cm]: 15,6
• pakendi laius [cm]: 15,4
• pakendi kõrgus [cm]: 10,5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt [mm]: 136,5
• Siseläbimõõt [mm]: 30
• Laius (mm): 68
• Veljeaukude hulk: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Installatsiooni pool: taga
• Piirangutega toode/piirangu info 2: koos poltidega
• Üldine informatsioon: wheelhub with bearing; rear; with screws
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Laius (mm): 68
• Siseläbimõõt [mm]: 30
• Ääriku läbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Manufacturer: SKF
• Name: SK VKBA3656
• Lisainfo: VKBA 3656 SKF
• Additional information: VKBA 3656 SKF

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 136.4
• Outer Diameter 1 [mm]: 85
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt [mm]: 136,5
• Siseläbimõõt [mm]: 30
• Laius (mm): 67,8
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 713610960

• Fitting Position: Front Axle
• Required quantity: 2
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Outer Diameter 2 [mm]: 136
• Manufacturer: KAVO

• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 312
• Versioon: One
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 86
• OE-numbri jaoks: 5Q0407621A
• Välisläbimõõt [mm]: 136,5
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Hammastehulk: 36
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right, Front Axle
• for brake disc diameter [mm]: 312, 340
• Block Separation:
• Outer Diameter [mm]: 136
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.45
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV264

• Fitting Position: Rear Axle
• Width [mm]: 80
• Manufacturer: FAST

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH, 1ZJ
• Number of mounting bores: 3
• Outer Diameter 1 [mm]: 136
• Outer Diameter 2 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: METZGER

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 276, 288
• for PR number: 1ZE, 1ZF, 1ZH
• Laius (mm): 83
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 136,5, 80
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Kinnitusaukude hulk: 3
• Hammastehulk sisend: 36
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Required quantity: 2
• Kaal (kg): 3,273
• pakendi pikkus [cm]: 16
• pakendi laius [cm]: 16
• pakendi kõrgus [cm]: 11
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt [mm]: 136
• Välisläbimõõt 2 [mm]: 80
• Veljeaukude hulk: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Installatsiooni pool: ees
• Üldine informatsioon: wheel hub with bearing; front
• Manufacturer: BORSEHUNG
• Lisainfo: B19118
• Additional information: B19118

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 312, 340
• for PR number: 1LG, 1ZA, 1ZB
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 137, 85
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Kinnitusaukude hulk: 3
• Hammastehulk sisend: 36
• Manufacturer: OPTIMAL

• Quantity: 2
• Fitting Position: Front Axle
• Thickness [mm]: 85
• Weight [kg]: 3.08
• Supplementary Article/Info 2: without bolts
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 137
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 137
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; front; without bolts
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• for OE number: 8S0498625A
• Siseläbimõõt [mm]: 29
• Laius 1 (mm): 67
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Kinnitusaukude hulk: 1
• Name: DA KWD1021
• Manufacturer: DAYCO

• Fitting Position: Front Axle
• Required quantity: 2
• Ääriku läbimõõt [mm]: 136
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt 1 [mm]: 80
• Manufacturer: SKF
• Name: SK VKBA6556
• Lisainfo: VKBA 6556 SKF
• Additional information: VKBA 6556 SKF

• Fitting Position: Front Axle
• for PR number: 1LG, 1ZA, 1ZB
• Kaal (kg): 3,483
• pakendi pikkus [cm]: 15,6
• pakendi laius [cm]: 15,6
• pakendi kõrgus [cm]: 9,6
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Välisläbimõõt [mm]: 136,5
• Välisläbimõõt 1 [mm]: 85
• Välisläbimõõt 2 [mm]: 65
• Laius 2 (mm): 48
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• Required quantity: 2
• Ääriku läbimõõt [mm]: 136,4
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt 1 [mm]: 85
• Manufacturer: SKF
• Name: SK VKBA7011
• Lisainfo: VKBA 7011 SKF
• Additional information: VKBA 7011 SKF

• Installatsiooni pool: ees
• Piirangutega toode/piirangu info 2: koos poltidega
• Üldine informatsioon: wheelhub with bearing; front; with screws
• Manufacturer: BORSEHUNG

• Quantity: 2
• Fitting Position: Front Axle
• Number of Holes: 3
• Weight [kg]: 0.765
• Supplementary Article/Info 2: without bolts
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 80
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; front; without bolts
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt [mm]: 136,4
• Välisläbimõõt 2 [mm]: 65
• Välisläbimõõt 1 [mm]: 80
• Laius 2 (mm): 48,1
• Kinnitusaukude hulk: 3
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 713610990

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH, 1ZJ
• Laius (mm): 48
• Jämedus/Tugevus (mm): 84
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 80
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: kuullaager
• Välisläbimõõt 1 [mm]: 65
• Välisläbimõõt 2 [mm]: 137
• Kaal (kg): 3,17
• Manufacturer: FEBI

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos rattakeskmega, koos kinnitusmaterjaliga, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH, 1ZJ
• Laius (mm): 48
• Jämedus/Tugevus (mm): 84
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 80
• Ava Ø (mm): 112
• Aukude arv: 5
• Laagriteostus: kuullaager
• Välisläbimõõt 1 [mm]: 65
• Välisläbimõõt 2 [mm]: 137
• Name: SW 30 94 6334
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos rattakeskmega, koos ABS-andurirõngaga, koos kinnitusmaterjaliga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for PR number: 1LG, 1ZA, 1ZB
• Observe dimensions:
• Outer Diameter 1 [mm]: 85
• Outer Diameter 2 [mm]: 136
• Manufacturer: METZGER

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring