Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Production date from: 26.05.2014
- Cooling Hose: from coolant regulator housing to engine cooler
- Number of inlets/outlets: 2
- Angle [°]: 90
- Material: Plastic
- Manufacturer: METZGER
- for OE number: 5Q0 122 051 BA
- Fitting Position: Lower
- Weight [kg]: 0.116
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Lower
- Colour: black
- Hose Length [mm]: 320
- Inner Diameter 1 [mm]: 20
- Inner Diameter 2 [mm]: 19.5
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Upper
- Colour: black
- Hose Length [mm]: 266
- Inner Diameter 1 [mm]: 15
- Inner Diameter 2 [mm]: 15
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material: Iron
- General Information: coolant pipe; iron
- Manufacturer: VIKA
-
Climate Zones: for moderate climate zones,
for cold climate zones - Vehicle Equipment: for vehicles with trailer hitch
-
for PR number: 8Z4,
8Z5 - Fitting Position: Upper Right
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Supplementary Article/Supplementary Info: with quick coupling
-
Supplementary Article/Info 2: with clip,
with protection hose, with seal ring - Cooling Hose: from radiator to water pipe
- Manufacturer: TOPRAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber with fabric lining General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Production date to: 25.05.2014
- Block Separation:
- Production date from: 26.05.2014
-
for PR number: 1D4,
1M5 - Cooling Hose: Piping to radiator
- Fitting Position: Upper Right
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material: Metal
- Weight [g]: 368
- Name: IM 80441
- Manufacturer: ORIGINAL IMPERIUM
- Material: Metal
- Guarantee: 3 years guarantee
- Weight [kg]: 0.4
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 43SKV762
- Material: Plastic
- Guarantee: 3 years guarantee
- Weight [kg]: 0.18
- Always compare old and new part (in particular OE No.):
- Name: CE 43SKV796
- Manufacturer: ESEN SKV
- Material: Plastic
- Weight [g]: 169
- Name: IM 80356
- Manufacturer: ORIGINAL IMPERIUM
- for PR number: TJ1
- Cooling Hose: from engine to water pump
-
Fitting Position: Engine Block,
Rear - Material: Metal
- Manufacturer: METZGER
- Production date to: 25.05.2014
-
for PR number: 8Z6,
8Z9 -
Fitting Position: Lower,
Radiator - Number of inlets/outlets: 3
- Hose Type: Moulded Hose
-
Supplementary Article/Supplementary Info: with pipe,
with holder -
Supplementary Article/Info 2: with quick couplers,
with clip, with clamp - Observe system fill quantity:
- Cooling Hose: from coolant regulator housing to engine cooler
- Manufacturer: TOPRAN
Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling Hose: from radiator to water pipe
- Fitting Position: Lower Left
- Weight [kg]: 0.629
- Supplementary Article/Info 2: with quick couplers
- for OE number: 5Q0 122 051 AR
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Material: Iron
- Guarantee: 3 years guarantee
- Weight [kg]: 0.67
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Cooling Hose: from radiator to water pipe
- Fitting Position: Lower Left
- Weight [kg]: 0.524
- Supplementary Article/Info 2: with quick couplers
- for OE number: 5Q0 122 051 AL
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cooling Hose: from radiator to water pipe
- Fitting Position: Lower Left
- Weight [kg]: 0.629
- Supplementary Article/Info 2: with quick couplers
- for OE number: 5Q0 122 051 AR
- Name: SW 33 10 2188
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production date to: 25.05.2014
- Vehicle Equipment: for vehicles with automatic climate control
-
for PR number: 8Z6,
8Z9 - Fitting Position: Lower
- Number of inlets/outlets: 3
- Hose Type: Moulded Hose
-
Supplementary Article/Supplementary Info: with pipe,
with holder -
Supplementary Article/Info 2: with quick couplers,
with clip, with clamp - Observe system fill quantity:
- Manufacturer: TOPRAN
Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) Cooling Hose: from distributor to engine cooler, from coolant regulator housing to engine cooler/water pipe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Production date to: 25.05.2014
-
for PR number: 8Z4,
8Z5 - Cooling Hose: Piping to radiator
- Fitting Position: Lower Left
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material: Plastic
- Manufacturer: METALCAUCHO
Manufacturer: METALCAUCHO
- Material: Iron
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- Production date to: 25.05.2014
-
for combined PR number: 9AK+8Z4+1D0,
9AK+8Z5+1D0, KH6+8Z4+1D0, KH6+8Z5+1D0 - Cooling Hose: from radiator to water pipe
- Fitting Position: Lower Left
- Supplementary Article/Info 2: with quick couplers
- Product must be determined on the vehicle or the motor:
- for OE number: 5Q0 122 051 AR
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from distributor to engine cooler
- Fitting Position: Upper Left
- Weight [kg]: 0.485
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 7
- Cooling Hose: from engine to engine cooler
- Fitting Position: Upper
- Weight [kg]: 0.56
- Supplementary Article/Info 2: with quick couplers
- Name: SW 33 10 2181
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cooling Hose: from radiator to water pipe
- Weight [kg]: 0.563
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: FEBI BILSTEIN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production date to: 25.05.2014
- for PR number: TJ1
- Cooling Hose: from coolant regulator housing to engine cooler
- Fitting Position: Upper Left
- Supplementary Article/Info 2: with quick couplers
- Product must be determined on the vehicle or the motor:
-
for OE number: 5Q0 122 101 BQ,
5Q0 122 101 BK, 5Q0 122 101 AH - Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Front Axle
- Material: Metal
- Weight [g]: 650
- Manufacturer: METALCAUCHO
- Production date from: 26.05.2014
- Block Separation:
- Vehicle Equipment: for vehicles with automatic climate control
- Fitting Position: Lower Right
-
Supplementary Article/Info 2: with quick couplers,
without clamps - Manufacturer: METZGER
for combined PR number: 9AC+8Z4+FM1, 9AC+8Z5+FM1, 8Z4+FM1, 8Z5+FM1, KH6+8Z6, KH6+8Z9, KH6+1D2+8Z4, KH6+1D2+8Z5, KH6+1D7+8Z4, KH6+1D7+8Z5
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks