Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 28.5
- Seal Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Name: RONGASTIHEND
- Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 650
- Core Width [mm]: 449
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Name: NI 65341
- Manufacturer: NISSENS
-
Lisainfo: VOLKSWAGEN PASSAT B8
(3G2, 3G5) (14- ) 2.0 TDI -
Additional information: VOLKSWAGEN PASSAT B8
(3G2, 3G5) (14- ) 2.0 TDI
Technical Information: Radiator with 5mm system-Advanced technology with higher power effect
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Core Length [mm]: 620
- Core Width [mm]: 410
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
-
Name: Radiaator,
mootorijahutus - Manufacturer: MAX
-
Engine Code: CUPA,
CUNA, DJGA - Climate Zones: for moderate climate zones
- Core Width [mm]: 398
- Core Length [mm]: 620
- Core Depth [mm]: 16
- Radiator type: Brazed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Name: MM BM1663
- Manufacturer: MAGNETI MARELLI
- Heating/Cooling: Auxiliary Radiator
- Material: Aluminium
- Core Length [mm]: 620
- Core Width [mm]: 410
- Core Depth [mm]: 24
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: NRF
- Heating/Cooling: Auxiliary Radiator
- Core Length [mm]: 620
- Core Width [mm]: 410
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
-
Name: Radiaator,
kivitusaku - Manufacturer: NRF
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 650
- Core Width [mm]: 416
- Core Depth [mm]: 24
- Water Tank Material (radiator): Plastic
- Packaging height [cm]: 13.2
-
Net Weight [g]: 2,
679 - Packaging width [cm]: 50
- Packaging length [cm]: 82.5
- Name: MH CR2054001S
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Surface: Brazed
- Core Length [mm]: 0
- Core Width [mm]: 0
- Core Depth [mm]: 0
- General Information: radiator; lead welding
- Manufacturer: VIKA
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 449
- Core Depth [mm]: 34
- Radiator type: Brazed cooling fins
-
Name: Radiaator,
mootorijahutus - Manufacturer: NRF
- Construction Year from: 03.2014
- Construction Year to: 03.2020
-
Transmission Type: 6-
Speed Dual- Clutch Transmission - Core Width [mm]: 449
- Core Length [mm]: 650
- Core Depth [mm]: 34
- Material: Aluminium
- Housing Type: Synthetic Material Housing
- Inlet Ø [mm]: 26
- Outlet Ø [mm]: 26
- Heating/Cooling: for vehicles without oil cooler
- Radiator type: Brazed cooling fins
- Weight [kg]: 5.49
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: VAL
- Construction Year from: 03.2014
- Construction Year to: 03.2020
-
Engine Code: CUNA,
CUPA -
Transmission Type: 6-
Speed Dual- Clutch Transmission - Core Width [mm]: 411
- Core Length [mm]: 650
- Core Depth [mm]: 24
- Material: Aluminium
- Inlet Ø [mm]: 33
- Outlet Ø [mm]: 33
- Heating/Cooling: for vehicles without oil cooler
- Radiator type: Mechanically jointed cooling fins
- Weight [kg]: 3.54
- Manufacturer: VALEO
- Additional information: 735558 VALEO
- Lisainfo: 735558 VALEO
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 650
- Core Width [mm]: 449
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Radiator type: Brazed cooling fins
- Core Length [mm]: 650
- Core Width [mm]: 395
- Core Depth [mm]: 22
- Water Tank Material (radiator): Plastic
- Packaging height [cm]: 13.5
-
Net Weight [g]: 3,
058 - Packaging width [cm]: 50.5
- Packaging length [cm]: 84
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Radiator type: Brazed cooling fins
- Core Length [mm]: 620
- Core Width [mm]: 408
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Packaging height [cm]: 15
-
Net Weight [g]: 3,
488 - Packaging width [cm]: 57
- Packaging length [cm]: 86
- Name: MH CR959000S
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks