• Fitting Position: Front Axle
• Suspension: for vehicles with sports suspension

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension

• for PR number: 0BD, 0BE, 0N4, 1X1
• for OE number: N10211201
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Bolt Head-/Nut Design: Male Hex
• Surface: Zink flake coated
• Strength class: 10.9
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• General Information: spring support; down
• Manufacturer: BORSEHUNG

• for PR number: 0BD, 0BE, 0N4, 1X1
• Model Year from: 2013
• Weight [kg]: 0.127
• Packaging length [cm]: 10.1
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.6
• Manufacturer: FEBEST

• for OE number: N10628301
• Thread Size: M12x1,5

• Model Year from: 2013
• Weight [kg]: 0.107
• Packaging length [cm]: 9.2
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Lower, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Bolt Head-/Nut Design: Male Hex
• Strength class: 10.9
• Surface: Zink flake coated
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Model Year from: 2013
• Fitting Position: Rear Axle
• Diameter [mm]: 14
• Weight [kg]: 0.2
• Packaging length [cm]: 20
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Manufacturer: FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Strength class: 10.9
• Axle: Independent wheel suspension
• Supplementary Article/Info 2: with nut, with protect screen
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• not for PR number: 2UF, 2UB
• Fitting Position: Front Axle
• Required quantity: 2
• Height [mm]: 70
• Name: TG TED58322
• Manufacturer: TEDGUM

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-034
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: AD-VW-035
• Supplementary Article/Info 2: without bearing
• Manufacturer: NTY
• Name: NTY AD-VW-035

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-033
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [g]: 247
• Manufacturer: METALCAUCHO

• Model Year from: 2013
• Fitting Position: Rear Axle
• Diameter [mm]: 14
• Weight [kg]: 0.195
• reinforced version:
• Packaging length [cm]: 19.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• only in connection with: 803 010
• Block Separation:
• Manufacturer: JP GROUP

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Fitting Position: Front Axle
• Lisainfo: Top Strut Mounting
• Additional information: Top Strut Mounting

• for PR number: 0N4, 1X1
• Model Year from: 2013
• Weight [kg]: 0.141
• Packaging length [cm]: 10.7
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Width [mm]: 127
• Thickness [mm]: 40
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.31
• Manufacturer: FEB
• Lisainfo: 44799 FEBI
• Additional information: 44799 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with standard suspension
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• Suspension: for vehicles with bad road version
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Suspension: for vehicles with sports suspension
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Quantity per axle: 2
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for OE number: 1K0412303E
• Name: SE D5-114
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle
• for OE number: 1K0412303B
• Manufacturer: AUTOFREN REPERATURKI
• Name: SE D5-093

• Suspension: for vehicles with bad road version
• only in connection with: 803010
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Height [mm]: 40
• Bearing Type: Rolling Bearing
• Name: Laager - K„„ndmik VW P. AUDI, SKODA
• Manufacturer: MEY
• Lisainfo: 1006410020
• Additional information: 1006410020

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!BEZ O½YSKA!!!

• Fitting Position: Front Axle
• for OE number: 1K0412303B
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Material: Aluminium
• Mounting Type: Rubber-Metal Mount
• Thickness [mm]: 60
• Weight [kg]: 0.34
• Required quantity: 2
• Inner Diameter [mm]: 10
• General Information: shock absorber bearing; upper
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Name: Vedruamordi tugilaager
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Alternative Repair Kit: 118 038
• Quantity per axle: 2
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.392
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 94 0171

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 37574 01
• Manufacturer: LMI

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- BEZ O½YSKA

• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 127
• Inner Diameter [mm]: 78
• Name: Laager,amorditugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Name: COC 49495777
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• for OE number: 1K0412303AA
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 803 024
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer!

• Model Year from: 2013
• Fitting Position: Front Axle
• Weight [kg]: 0.33
• Packaging length [cm]: 12.7
• Packaging width [cm]: 12.7
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle
• Height of bump stop [mm]: 70
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents" Name: ZESTAW MONTA½OWY AMORTYZATORA AUDI P. AUDI A3 ALLSTREET (8YH) 20-, A3 (8V1, 8VK) 12- SKODA FABIA IV (PJ3) 21- VW ARTEON SHOOTINGBRAKE 17-, G

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [g]: 812
• Supplementary Article/Info 2: without bearing
• Component Number: 2
• Name: IM 37649
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Name: Laager,amorditugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Manufacturer: LMI

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW T. LEON/GOLF VII/SPORTSVAN/OCTAVIA 12- LE/PR

• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer!

• Construction Year from: 05.2013
• Construction Year to: 05.2015
• Fitting Position: Front Axle
• Vehicle type: Octavia
• Suspension: for vehicles with increased ground clearance
• Weight [kg]: 0.337
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Fitting Position: Right, Left, Rear Axle
• Manufacturer: SNR
• Name: SN KB954.08

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 60
• for OE number: 5Q0513353G
• Manufacturer: SASIC

• Construction Year to: 05.2015
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Height of bump stop [mm]: 80
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Inner Diameter [mm]: 14
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: suspension strut storage; front
• Manufacturer: BORSEHUNG

• Suspension: for vehicles without electronic suspension control
• for PR number: G09
• Fitting Position: Front Axle
• Weight [kg]: 0.376
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 02.2014
• Vehicle Identification Number (VIN) from: 5E-D-000 001
• Vehicle Identification Number (VIN) to: 5E-8J006446
• Axle: Rigid Axle
• Suspension: for vehicles without lowered suspension
• for PR number: 7ZV
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: BIL

• Fitting Position: Front Axle
• Suspension: for vehicles with bad road version
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Inner Diameter [mm]: 78
• Thickness [mm]: 40
• Outer Diameter [mm]: 127
• Width [mm]: 127
• Weight [kg]: 0.31
• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: deep groove ball thrust bearing; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• for OE number: 1K0412303M
• Name: SE D5-212
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle
• Suspension: for vehicles with bad road version
• only in connection with: 803 010
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Supplementary Article/Info 2: without ball bearing
• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Required quantity: 2
• Inner Diameter [mm]: 14
• General Information: suspension strut storage; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for OE number: 1K0412303F
• Name: SE D5-201
• Manufacturer: AUTOFREN SEINSA

• for OE number: 5Q0412249C
• Fitting Position: Front Axle
• Weight [g]: 1,120
• Supplementary Article/Info 2: with ball bearing
• Component Number: 2
• Bearing manufacturer: IMPERGOM
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: IMP

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Construction Year from: 05.2013
• Fitting Position: Rear Axle
• Name: Vedruamordi tugilaager
• Manufacturer: BIL

• Quantity: 2
• Quantity Unit: Kit
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Left, Front Axle Right
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Replace in pairs only:
• for components see parts list:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: G05
• for combined PR number: G02+2UC
• Length [mm]: 172
• Width [mm]: 74
• Fitting Position: Front Axle
• Weight [kg]: 0.216
• Name: Puhver, vedrustus
• Manufacturer: FEB

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: MEY

Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.402
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 05.2015
• for combined PR number: G02+2UB, G02+2UF
• Block Separation:
• Construction Year from: 05.2015
• for PR number: G06, G08
• Fitting Position: Front Axle
• Weight [kg]: 0.335
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

Suspension: for vehicles with heavy duty suspension, for vehicles with lifted suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity: 2
• Quantity Unit: Kit
• General Information: repair kit for shock absorber; rear
• Manufacturer: BORSEHUNG

• Quantity: 2
• Quantity Unit: Kit
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Manufacturer: BORSEHUNG

• Quantity: 2
• Quantity Unit: Kit
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: BORSEHUNG

• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.1
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH