• Fitting Position: Front Axle
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 82
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, without bearing, front
• Additional information: Bearing for strut, without bearing, front

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Support for shock absorber, rear, upper
• Additional information: Support for shock absorber, rear, upper

• Fitting Position: Rear Axle Left, Rear Axle Right
• Lisainfo: Support for shock absorber, rear, upper
• Additional information: Support for shock absorber, rear, upper

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 7201592
• Manufacturer: GSP

• Inner Diameter [mm]: 14
• Fitting Position: Front Axle
• Required quantity: 2
• Weight [kg]: 0.056
• Name: Laager,amorditugilaager
• Manufacturer: TED

• Fitting Position: Front Axle
• for OE number: 1J0412249
• Manufacturer: SASIC

• Fitting Position: Front Axle Left, Front Axle Right
• Base body material: Sheet Steel
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity per packing unit: 10
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Top mount left, right

• Fitting Position: Front Axle Left
• Weight [g]: 65
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Name: IM 32295/1
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: 3RG

• Quantity: 2
• Fitting Position: Front Axle
• General Information: suspension strut storage; front; aluminum
• Manufacturer: VIKA

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Height [mm]: 13.5
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager,amorditugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Alternative Repair Kit: 108 561
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1J0 412 331 B
• Manufacturer: GSP

• Fitting Position: Front Axle
• Quantity per axle: 2
• Name: Laager - K„„ndmik VW
• Manufacturer: SKF

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Fabrication Number: AD-VW-006
• Manufacturer: NTY
• Name: NTY AD-VW-006

• Outer Diameter 1 [mm]: 65
• Height [mm]: 53
• Outer Diameter 2 [mm]: 82
• Fitting Position: Front Axle Right
• Manufacturer: SNR /NTN-SNR/
• Name: SN KBLF410.82

Vehicle Identification Number (VIN): [5J-93120 133;], [5J-95032 165;], [5J-9A508 237;], [5J-9B505 016;], [5J-9B601 132;], [5J-9K506 834;]

• Fitting Position: Right, Left, Front Axle
• Outer Diameter 1 [mm]: 45
• Width 1 [mm]: 13
• Inner Diameter 1 [mm]: 14
• Manufacturer: SNR /NTN-SNR/
• Name: SN M254.01

• Material: Rubber
• Fitting Position: Upper, Rear Axle both sides
• Outer Diameter [mm]: 75
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Construction Year to: 05.2015
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 6R0 412 249
• Manufacturer: LMI

Name: Laager - K„„ndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-

• Fitting Position: Front Axle
• Weight [kg]: 0.237
• Required quantity: 2
• Thickness [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 53
• Inner Diameter [mm]: 26
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BGA

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Construction Year to: 05.2015
• for PR number: G45, G46, G47, G48
• Block Separation:
• Inner Diameter [mm]: 26
• Height [mm]: 54
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: FEB
• Additional information: FE09227
• Lisainfo: FE09227

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 05.2015
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Height [mm]: 54
• Manufacturer: 3RG

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 6R0 412 249
• Manufacturer: SACHS

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• for OE number: 1J0412331C
• Manufacturer: SASIC

• Fitting Position: Rear Axle
• Manufacturer: MAX

Name: Laager - K„„ndmik. VW T. BORA/GOLF 4/FABIA/A2/OCTAVIA 96- LE/PR

• Fitting Position: Rear Axle Left, Rear Axle Right
• for OE number: 1J0 513 353 B S1
• Fabrication Number: AD-VW-020
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 11
• Fabrication Number: AD-VW-018
• Manufacturer: NTY
• Name: NTY AD-VW-018

• Construction Year to: 05.2015
• for PR number: G45, G46, G47, G48
• Block Separation:
• Height [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 54 0012
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0412331
• Fitting Position: Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Weight [g]: 273
• Supplementary Article/Info 2: without bearing
• Thickness [mm]: 54
• Name: IM 32354
• Manufacturer: ORIGINAL IMPERIUM

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 25346 01, 36957 01
• for OE number: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Name: Laager - K„„ndmik. VW P. GOLF 4 (BEZ O½YSKA)
• Manufacturer: LMI

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 802 270, 802 697
• for OE number: 1J0 412 331, 1J0 412 331 B, 1J0 412 331 C
• Name: Laager - K„„ndmik. VW P. GOLF 4 9
• Manufacturer: SAA

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 815008930
• Manufacturer: FAG

• for PR number: 1JA, 1JB
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Housing Type: Aluminium Housing
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 2
• Weight [kg]: 0.237
• Fitting Position: Front Axle
• Thickness [mm]: 54
• Required quantity: 2
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: BORSEHUNG

• Weight [kg]: 0.28
• Fitting Position: Rear Axle
• Required quantity: 2
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle both sides
• Name: CFD 150206
• Manufacturer: DACO

• Fitting Position: Front Axle
• Weight [kg]: 0.1
• Packaging length [cm]: 6
• Packaging width [cm]: 4.9
• Packaging height [cm]: 5.1
• Manufacturer: MONROE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: without bearing
• Weight [kg]: 0.28
• Manufacturer: CORTECO
• Name: COC 80000230

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.41
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM I —RUB¤

• Fitting Position: Rear Axle
• Name: Laager - K„„ndmik. VW T. GOLF 4/B
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Name: Vedruamordi tugilaager
• Manufacturer: MEY

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Shape: round
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• for OE number: 1J0 513 353 B, 6R0 513 353, 6R0 513 353 B
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.41
• Supplementary Article/Info 2: with ball bearing
• Name: SW 30 93 7878
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0412331B
• Fitting Position: Front Axle
• Material: Rubber/Metal
• Weight [g]: 276
• Supplementary Article/Info 2: with ball bearing
• Component Number: 2
• Bearing manufacturer: IMPERGOM
• Name: IM 37241
• Manufacturer: ORIGINAL IMPERIUM

• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/OCTAVIA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Technical Information: Suspension mounting + separated suspension bearing
• Manufacturer: KYB

Name: Laager - K„„ndmik. FORD P. GALAXY/ SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO/ VW CADDY II, CORRADO, GOLF III, IV, PASSAT, POLO, SHARAN,

• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• for OE number: 1J0 513 353 B, 6R0 513 353, 6R0 513 353 B
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LMI

Name: Laager - K„„ndmik. VW T. BORA/GOLF 4/FABIA/A2/OCTAVIA 96- LE/PR

• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with ball bearing
• Outer Diameter [mm]: 83
• Quantity per axle: 2
• Manufacturer: METZGER

• Number of Parts [parts]: 2
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR
• Name: SN KB657.08

• Fitting Position: Front Axle
• Weight [kg]: 0.4
• Supplementary Article/Info 2: with rolling bearing
• Guarantee: 5 years guarantee
• Packaging length [cm]: 8.1
• Packaging width [cm]: 8.1
• Packaging height [cm]: 9
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with heavy duty suspension

• Fitting Position: Rear Axle
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Weight [kg]: 0.28
• Required quantity: 2
• Material: Aluminium, Rubber/Metal
• General Information: Shock absorber upper cover
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• Weight [g]: 280
• General Information: Shock absorber upper cover
• Manufacturer: BORSEHUNG
• Additional information: 1J0513353G BOR
• Lisainfo: 1J0513353G BOR

• for combined PR number: 1JB+1JH
• Length [mm]: 125
• Inner Diameter [mm]: 29
• Height [mm]: 58
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW T. BORA/GOLF 4/FABIA/A2/OCTAVIA 96- LE/PR

• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Name: Vedruamordi tugilaager
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Supplementary Article/Info 2: without bearing
• Guarantee: 5 years guarantee
• Packaging length [cm]: 13.6
• Packaging width [cm]: 11.8
• Packaging height [cm]: 11.4
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with heavy duty suspension

• for combined PR number: 1JB+1JH
• Length [mm]: 125
• Inner Diameter [mm]: 29
• Height [mm]: 58
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Supplementary Article/Info 2: with ball bearing
• Name: SW 32 91 9274
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Name:
• Manufacturer: SKF

• Vehicle Identification Number (VIN): [1J-Y-500 001;]
• Fitting Position: Right, Left, Rear Axle
• Number of Parts [parts]: 1
• Width 1 [mm]: 57
• Outer Diameter 1 [mm]: 64
• Manufacturer: SNR
• Name: SN KB957.03

• Model Year from: 2013
• Fitting Position: Front Axle
• Weight [kg]: 0.352
• Packaging length [cm]: 8.2
• Packaging width [cm]: 8.2
• Packaging height [cm]: 5.2
• Manufacturer: FEBEST